I have vista 64 bit installed, 4gb ram and a geforce 8400 gs.
photoshop opens ok, but when I open a image, only appears a gray window. and when i move the image box, the image appears, but when I stop moving it, it desapears again.. I know I can edit the image, because I can add a brush into it, and when I move the box the image is brushed.. And when I enter the filter gallery the image appears normaly..
I'm trying to simply move an object as usual but rather than moving it, a grey box appears and nothing will move.
Looks like this..[URL]...
I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
when I use Save As after making some basic adjustments to an image (usually just resizing), the resulting image looks different from the original. The image on the right shows exactly what it looks like in Ps before being saved out, and on the left is the exported JPG. You can see that the left image looks "faded out"--like it's lost contrast and brightness. In general, I'm opening either JPG or TIFF files and saving them to JPG.
View 4 Replies View RelatedBeen running PS CS5 successfully for a couple of years, then all of a sudden I can't work at magnifications other than 25% and Actual Pixels. The image disappears and I only see the checkerboard. There was a Windows update I ran on April 10 that included an update to the graphics card, which I thought might have been the culprit, so I uninstalled it. That didn't fix the problem, so I updated it again. I couldn't see anything else in those updates that should affect Photoshop.
Here is what I've tried so far:
I updated my graphics driver (NVidia GeForce),
Trashed Adobe Photoshop CS5 Prefs.psp (which crashed PS completely when I reopened it...luckily I kept the old prefs file on my desktop and dragged it back in),
Made sure Photoshop was up-to-date.
Photoshop CS5 (v.12.0.4 32 bit)
Windows 7 Home Premium (v.6.1 Build 7601: Service Pack 1)
AMD Phenom II X4 840 Processor 3.20 GHz
How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?
View 1 Replies View RelatedWhen i start a new document and select the size ( lets say for example 4x4 inches ) it appears smaller in the screen....if i put an actual ruler next to the screen it measures to something like 2x2 inches.
View 6 Replies View RelatedWhen I select photos to merge, either via Bridge or within CS5 (Automate/Merge to HDR Pro), the Merged image appears over the CS5 screen. However, the bottom of the HDR screen with the photos selected for the merge along with the Cancel & Save buttons are cut off. The only way for me to exit HDR is to force quit.
My monitor resolution is 1440X900 which is better than the 1024x768 required for CS5.
[URL]
Recently when I upload photographs in Photoshop Elements 8, the images in the catalogue appear as an hourglass when viewed as multiple images, but when I zoom in to a single catalogue image the picture appears. Previous images in the cataloge appear as normal.
View 2 Replies View RelatedJust loaded cs5 onto a second computer legally. Any tiff or raw file brought into cs5 appears as a grey and white checker board image. From there its gets even crazier. CS5 works fine on the first computer. both loaded from the same legal disk.
View 1 Replies View RelatedIm using Adobe Photoshop CC. Everytime I click Liquify a black screen appears instead of the image.I'm using Dell Inspiron 5520.
View 1 Replies View RelatedLR version - 4.2
OS - OS X 10.8.2
I've just moved to a new computer and also I've just started using LR4. Since moving I've had a few of my imported images display the 'The image appears to be damaged' message when in develop mode.
The image appears undamaged and I can edit and export without issue, if I copy the image on disk the copy will also cause the message to appear however when I copy the image to another computer (running Windows 7 and LR 3.3) and that doesn't report the image as damaged.
I'm not too sure what causes LR to report the image as damaged also I don't know why the image would appear damaged on one computer and not on another.
A thin white border around the figure that I had edited appeared out of nowhere. I was able to erase it before editing the background but now I can't erase it or remember how I did that.
how to get rid of this line? If by setting the eraser color to the background color, how do I do that? As I get rid of the line, I'd also like to refine the figure's outline so it becomes cleaner.
Having followed various tutorials to the letter, I am finding that, on close inspection, my stacked image appears to have small, random, out of focus blobs. No matter how many shots I use in the stack, the final results are the same. However, if I repeat the procedure, with the same images, the result is the same, but with different areas of softness.
View 7 Replies View RelatedFor printing or mailing purpose, i used to re-open big .psb layer files (2-6GB) in cs5 and cs6 with keybombo "alt" and "shift" while double clicking the document in the finder window (10.6 + 10.7.5), in order to save time.
This is not possible anymore, everytime i open a document this way its white and empty in photoshop.
This image appears to have jagged edges on all of the paths. I created outlines for the text and converted strokes to path, but i can not seem to figure out how to make the image's path edges appear smooth. The image above is a png file but the image still appears this way when i view the ai version in illustrator.
View 10 Replies View RelatedI've built a 3D cylinder shape in Illlustrator and have applied plastic shading. Looks OK in Illustrator, but when imported into InDesign or opened in Photoshop, it appears to be partially transparent AND what looked to be smooth shading in Illustrator appears as a strange pattern in PS and InD, etc.We're getting close to final and this will be printing as it's a logomark.Is there something I'm missing that would make this shape a solid shape (instead of appearring to be transparent) and reproduce well? I just want it to look in PS and InD (and on paper) the way it looks in Illustrator.
View 3 Replies View RelatedI am linking to the exact same background image file (TIF) in more than one illustrator file. This image is on the bottom layer in four different files.
The opacity on the image and the image's layer is set to 100% in all the files. In the dialog box for each of the layers that contain the image, the "Dim" control is unchecked. There are no other higher layers that contain artwork that might interfere with the image's appearance.
Yet...in two of the files, the image looks full and vibrant. In the other two files, the image looks dim and faded.
Is there another control that I'm missing that might be causing the image to be faded. (I want it to be full and vibrant.)
I am creating a peice of artwork in illustrator. I have cut out the icecream image in photoshop and placed it in illustrator as a psd file. It looks fine in illustrator, looks like it should do. The problem occurs when I export to pdf, a black border around the ice cream image appears. However when I print the black border does not display. So the issue with the black border only appears on the pdf. Check out the attachment beow for example of what I mean.
View 5 Replies View RelatedWhen I add an image to my sketch the main body then appears "of the ground" as you van see from the attached screen shot. The shadow and reflection is distant. The minute I remove the instead image the object and the shadow touch again as it should be.
View 1 Replies View RelatedI have several raw images that were imported directly from the memory card into LR5 as DNG files. They look fine in the Library mode - both in Grid and Loupe view, but when they are opened into the Develop module they have gray and pink boxes as if information is missing and I get an error message saying "image appears to be damaged".
Is it really damaged or is there a way to resolve this? When I look at the file itself through Finder it shows the damage, so I'm thinking it's damaged but somehow the previews aren't?
Just want to understand before I import again or start editing only to lose more pictures. Is it a bug?
We recently installed extra RAM only to find out it wasn't compatible with the Mac. We have the correct RAM in there now, but I don't know if I should uninstall and reinstall LR5 or if it should now be fine with the new RAM or if it's totally unrelated to the RAM.
I have one Inventor Pro 2012 SP1 user who is trying to insert a bmp image into a sketch so he can create a decal and the image appears blank and gray. See the attached screen capture. We converted the bmp to a jpg and we get the same result. When I insert the bmp into a sketch on my workstation and it views correctly. I've logged into the same workstation as the user who is having the problem and the image also views correctly. I tried to change the file associaiton from Microsoft Picture View to Paint and I get the same result.
Here are his workstation specs:
Dell Precision T5400 - Xeon Quad Core - 2.93 GHz
Windows XP SP2 - x32
4 GB RAM
Nvidia Quadro FX 570
When making a selection, I like to use the magnetic lasso tool. I usually zoom in on the image. I just hate it when you get to the edge of the image and you have to "manually" push the lasso tool against the edge of the image to give you get access to the rest of the image to select it. I always mess up and selection is ruined by the quick movement when more is opened....
is there any way to scroll the image up or down when you get to the edge of it and you still have to select outside of the window...
Maybe there's a key stroke that will allow me to scroll up or down or right or left without losing the amount that I've already selected.
The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference.
View 13 Replies View RelatedI've just moved from CS3 to CS6. Previously, when working on a layer mask I could make the image active by Command – ~ . This doesn't work now - is there another keyboard shortcut for this? I use a Mac, OS 10.7.4.
View 3 Replies View RelatedI am the webmaster for my website i want to make images which move like ads in Google. Tell How i can make that in Photoshop.
View 2 Replies View Relatedi am the webmaster of my website i want to make images which move like ads in google.Tell How i can make that in photoshop
View 2 Replies View Relatedi'm wanting to make some banners for my site, i just wondered how i would make a SIMPLE banner thew has moving text on it. Are there any guides out there?
View 1 Replies View RelatedImage size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
I run Photoshop Cs6 and this has just recently began, after it has been working fine. After placing the image I would go to select my tool to edit the picture and it crashes.
I can place the photo just fine its always afterwards when I try to do something to it dose it crash, its like the smart object is protect it from editing as the moment I click on any thing even to merge visible it instantly crashes.
I am still able to open the pictures and edit them this way with no problems, its just after they are moved onto a different canvas dose the problem emerge. I run Windows 7 Home Premium
I-3770k Intel Processor
8gb Corsair Vengence
Amd 6870 1GB Graphics Card
800 Watt Power Supply
Crash Details:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.0.0
Application Timestamp: 4f61c045
Fault Module Name: aticfx64.dll
Fault Module Version: 8.17.10.1191
Fault Module Timestamp: 5154f6c5
Exception Code: c0000005
Exception Offset: 000000000009136e
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: bb7d
Additional Information 2: bb7de82df0bd197d4191544551bcd838
Additional Information 3: 369b
Additional Information 4: 369bef6de47672d97271c1faa65a74b9
What is the procedure for moving text in an image after it has been flattened. At one time I was able to use the Polygonal lasso tool to select and move, now I am unable to do so.
View 2 Replies View Related