Photoshop :: HDR Pro On CS5 - Merged Image Appears But Bottom With Save Buttons Cut Off?
May 5, 2011
When I select photos to merge, either via Bridge or within CS5 (Automate/Merge to HDR Pro), the Merged image appears over the CS5 screen. However, the bottom of the HDR screen with the photos selected for the merge along with the Cancel & Save buttons are cut off. The only way for me to exit HDR is to force quit.
My monitor resolution is 1440X900 which is better than the 1024x768 required for CS5.
[URL]
View 11 Replies
ADVERTISEMENT
Dec 14, 2012
I like to keep my layers carefully named. I often create new layers over existing ones to build up effects and paint in details. When I merge these layers, Photoshop always assigns the new merged composite layer the name of whatever the topmost layer was. I would much prefer it to default to naming the new layer whatever the bottom layer was called. I'm using CS5.5.
I might start with my assets in a file, with layer names like: Model, Field, Product, Logo, etc... Then add effects on layers called, Shading, Highlight, Package Detail, Lettering, etc... over each original layer. When merged, instead of being named the more-appropriate names, it will of course use the top layer names and I end up with my layers called "Shading, Highlight, Package Detail, Lettering. It's made much worse when I duplicate effects to modify and apply to multiple layers, then merge, leaving me with a file with layer names "Highlight, Highlight Copy 1, Highlight Copy 2, etc..." Renaming to my original layer names is very tedious as a result.
View 4 Replies
View Related
Oct 11, 2012
when I use Save As after making some basic adjustments to an image (usually just resizing), the resulting image looks different from the original. The image on the right shows exactly what it looks like in Ps before being saved out, and on the left is the exported JPG. You can see that the left image looks "faded out"--like it's lost contrast and brightness. In general, I'm opening either JPG or TIFF files and saving them to JPG.
View 4 Replies
View Related
Sep 24, 2012
File name appears at bottom of video ?
I new to VS X5 Pro. I have a very basic question, I'm sure.... Is it possible to not have the computer file name of the video appear at the bottom of the video for the first few seconds? It does fade away but is not acceptable to be there at all. Is this a Windows 7 config issue or something in VS?
View 3 Replies
View Related
Jan 6, 2013
I just bought Lightroom 4 (student version) and fully registered it. After importing photos to the library, nothing appears in the filmstrip on the bottom of the screen. Do I need to turn something on to make them appear? It is making navigation much more difficult while developing (I can only view one image at a time while developing).
View 3 Replies
View Related
Oct 19, 2013
I am unable to save a completed project as a jpg file even after carefully merging the layers. The only way I can do that appears to be to use Save for Web - and I do not want to compress the images as web images. Also, in Elements 9 I could open a PSE file in layers and continue to edit - in 12 I cannot do that. I'm really very discouraged and wish I had my Elements 9 back.
View 8 Replies
View Related
Dec 8, 2012
I merged some images in Photoshop and the sky is now stepped. I want to extend the lowest part of the sky to equal the highest part of the sky. How can I do this in Photoshop? The images was made up of 16 images, and is now a .PSB file.
View 4 Replies
View Related
Nov 12, 2012
Why have colors in my merged image changed? I am running Photoshop CS4 on Windows 7 and I'm viewing 3-channel RGB images. Something has changed and the blue channel doesn't appear in the image and the green channel is now blue. Everything looks perfect according to the thumbnails in the channel window. But when I looked at the merged image in the central view, again, blue is gone and green is now blue.
View 1 Replies
View Related
Mar 1, 2014
Win 8.1 64 bit A Toshiba Satellite laptop, LR 5.3. When I try to export I get a window without export buttons at the bottom to do the export. Further if I try to resize the export window the export window disappears and LR freezes requiring to ctrl/alt/del to close it. I cannot export anything to HD or email, etc.
I was in a class last night where everyone had Macs and the buttons appeared on their versions and worked fine. Totally repeatable. I can supply screen shots.
Makes LR totally useless.
View 3 Replies
View Related
Feb 9, 2014
I download an image of the net of a dog with a .png transparent background. open in paint it's showing the transparency which is great, now say i make another image (not a layer) of 400px, by 400px, and fill it white, I'm so used to in photoshop just dragging transparency masks/layers from one image directly into a new image,
I've tried everything in paint.net even tried making a new layer, filling that white, bringing the transparency image to the front. so the white layer is behind the transparency one, then copy/cut to the new image with a filled in "white" background.
but all that copies across is the transparency layer, unlike Photoshop there's no copy merged, move merged option. so how do you get to cut/move a bunch of layers as 1 into a new image either by drag and drop, or cut and paste?
View 4 Replies
View Related
Apr 5, 2012
We hit save and everything appears as though it is saving, only to find out after we've closed out the file that it hasn't been saved. Or portions of the work we did were saved but not the entirety, and out of chronological order. Though we are connected to a series of networked servers, we do all of our work locally and save locally before copying the files back to the server. This has affected 5 people so far and started occurring within the last two weeks. We've been doing this sort of work for over 4 years here and never encountered this problem.
We're pretty desperate to see if there's some sort of answer. So far our only solution is to keep saving the file in different locations on our system with different names, just in case.
We are all running on Mac OSX Lion 10.7.3 and Photoshop CS5 12.0.4.
View 7 Replies
View Related
Mar 7, 2012
Where do I tell PSPx4 not to give me this warning?
"Because of the limitations of the specified file format, the saved file will be limited to a merged image. Would you like to continue?"
I have been through the Preferences / Warnings & Auto Actions and can see no place to set it. I resolved it in PSPX2 but I can't remember how I did it. I have compared the 2 version's settings & can't see any difference.
View 3 Replies
View Related
Jun 5, 2013
Whenever I press CMD+S (which is supposedly a shortcut for a quick save on Mac) the Save As window always appear. I looked at the File menu and there's nothing wrong with the shortcut key. I also tried pressing CMD+SHIFT+S (which is the real Save As shortcut) and it works fine.
View 4 Replies
View Related
Jun 17, 2012
When selecting SAVE AS in Photoshop CS5, I received a message saying that the disk is full. This is this first time I have seen this message from CS2 on. I don't understand what disk is being mentioned here. Of course I understand what disk full means, but I don't understand what disk is being discussed or refered to.
View 1 Replies
View Related
Jun 1, 2013
I am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file.
View 1 Replies
View Related
May 16, 2013
Been running PS CS5 successfully for a couple of years, then all of a sudden I can't work at magnifications other than 25% and Actual Pixels. The image disappears and I only see the checkerboard. There was a Windows update I ran on April 10 that included an update to the graphics card, which I thought might have been the culprit, so I uninstalled it. That didn't fix the problem, so I updated it again. I couldn't see anything else in those updates that should affect Photoshop.
Here is what I've tried so far:
I updated my graphics driver (NVidia GeForce),
Trashed Adobe Photoshop CS5 Prefs.psp (which crashed PS completely when I reopened it...luckily I kept the old prefs file on my desktop and dragged it back in),
Made sure Photoshop was up-to-date.
Photoshop CS5 (v.12.0.4 32 bit)
Windows 7 Home Premium (v.6.1 Build 7601: Service Pack 1)
AMD Phenom II X4 840 Processor 3.20 GHz
View 3 Replies
View Related
Dec 10, 2008
I have vista 64 bit installed, 4gb ram and a geforce 8400 gs.
photoshop opens ok, but when I open a image, only appears a gray window. and when i move the image box, the image appears, but when I stop moving it, it desapears again.. I know I can edit the image, because I can add a brush into it, and when I move the box the image is brushed.. And when I enter the filter gallery the image appears normaly..
View 5 Replies
View Related
Mar 4, 2012
I'm running PS CS3 on Mac iBook with 10.5.8
I've been using this setup for years & have always been able to drag out the right bottom corner to increase the grey space round an image so i can transform better or what ever. But now when I try to drag out that corner the image window flinches slightly & a line appears around the image which disapears when I let go.Also when I try to expand the layers palette down by dragging it's lower right cornes so I can see more layers nothing happens, there is no stripey corner marks on that corner & when i try click & try to drag nothing happens.
View 5 Replies
View Related
Aug 6, 2003
1. i want to make the bottom of an image fade to black gradually. like a spotlight all around it.
2. i want to know how to make a gradiented grey backround, starting black. ending gray.
View 1 Replies
View Related
Oct 24, 2013
How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?
View 1 Replies
View Related
Jun 7, 2012
When i start a new document and select the size ( lets say for example 4x4 inches ) it appears smaller in the screen....if i put an actual ruler next to the screen it measures to something like 2x2 inches.
View 6 Replies
View Related
Aug 10, 2012
how I would achieve this exact effect in Photoshop? The 2 light blue type of effects, one at the top of the image, the one at the bottom of the image. It isn't just regular lighting, as it uses a totally different light blue color. I don't know how to achieve this effect
View 9 Replies
View Related
Sep 24, 2012
I'm not sure exactly what I did to my photoshop. I'm use a MAC platform. This is what it looks like right now but I want to to go back to being like the image on the bottom. I think I turned on or off something but I have no clue what I did.
View 3 Replies
View Related
Jan 6, 2013
Why is it when i drag one image from the bottom panel over to another picture(solid color) i will only get 50% of the image and not the full image. Same thing when i copy and paste that image over the gray solid colored image also i will get only 50% of the image. The original image of the cat(full view) is about 24.79% and picture is 11.733 x 15.644 in size. the other image (solid color) is at 43.63% or 6.667 x 8.889". size is in inches. Do i have to resize the images and if so how as i am a stupie in this matter. The images are aligned side by side on the main panel or display.I am trying to place the cat over the gray background image and with a layer mask delete the present baackground of the cat to uncover the gray of the bottom layer.
View 9 Replies
View Related
May 15, 2012
Recently when I upload photographs in Photoshop Elements 8, the images in the catalogue appear as an hourglass when viewed as multiple images, but when I zoom in to a single catalogue image the picture appears. Previous images in the cataloge appear as normal.
View 2 Replies
View Related
Jan 25, 2013
Just loaded cs5 onto a second computer legally. Any tiff or raw file brought into cs5 appears as a grey and white checker board image. From there its gets even crazier. CS5 works fine on the first computer. both loaded from the same legal disk.
View 1 Replies
View Related
Sep 1, 2013
Im using Adobe Photoshop CC. Everytime I click Liquify a black screen appears instead of the image.I'm using Dell Inspiron 5520.
View 1 Replies
View Related
Jul 4, 2012
I have a series of sheets, each with two viewports to show two plan views of a long road alignment. I arranged them to read bottom to top, as it goes up stationing, as we do with cross section sheets, but have been told by an outside reviewer that the sheets are confusing and should read top down.
How would you arrange them?
View 2 Replies
View Related
Apr 12, 2012
When I rotate a landscape image 90 degrees to portrait format the top and bottom of the image gets cut off. How do I prevent that and be able to view the whole image?
View 3 Replies
View Related
Dec 16, 2012
LR version - 4.2
OS - OS X 10.8.2
I've just moved to a new computer and also I've just started using LR4. Since moving I've had a few of my imported images display the 'The image appears to be damaged' message when in develop mode.
The image appears undamaged and I can edit and export without issue, if I copy the image on disk the copy will also cause the message to appear however when I copy the image to another computer (running Windows 7 and LR 3.3) and that doesn't report the image as damaged.
I'm not too sure what causes LR to report the image as damaged also I don't know why the image would appear damaged on one computer and not on another.
View 3 Replies
View Related
Feb 16, 2013
A thin white border around the figure that I had edited appeared out of nowhere. I was able to erase it before editing the background but now I can't erase it or remember how I did that.
how to get rid of this line? If by setting the eraser color to the background color, how do I do that? As I get rid of the line, I'd also like to refine the figure's outline so it becomes cleaner.
View 3 Replies
View Related
