The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference.
View 13 RepliesSuddenly today, cannot see the develop changes happening on the main center image, only on the filmstrip at bottom? Is something set wrong?
View 1 Replies View RelatedEverything is calibrated. That is not an issue.
When I work the photo (JPG, TIFF or PSD) to where it is what I want, the preview is darker in the print preview. Probably one f/stop in photo terms. And, THIS is how it actually prints.
What is causing that? And, is there a fix?
None of the "show paper color," etc. are checked, so that is not causing the difference.
In develop mode in LR 4.4 I get a small line through the middle of the image preview box in the navigation panel.
Why and how I might get rid of it? I used to get it in 4.3 and 4.1 too.
How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?
View 1 Replies View RelatedWhen i start a new document and select the size ( lets say for example 4x4 inches ) it appears smaller in the screen....if i put an actual ruler next to the screen it measures to something like 2x2 inches.
View 6 Replies View RelatedFor example, say I had a dot, and I selected it, and it was on a corner of a 500x500 pixel square, how can I center it in the middle of the whole screen?
E.g. ;
_____
|. |
|___|
How can I get that dot to center in the middle?
just installed GIMP 2.8.4 on iMac OS X 10.8.3 and image previews are not showing in preview panel. Had a look thro' docs and tried the suggested "click"/cmd click/ctl click to refresh/force refresh but no joy.
View 1 Replies View RelatedI'm installing Lightroom 5 in a classroom of Macs with OS X 10.9. When another user logs on a to computer and starts Lightroom, Lightroom welcome screen pops up again and asks for country, and in next screen displays the serial number Lightroom was activated with. After pressing OK the user can proceed to use Lightroom. How to avoid the welcome screen from appearing to all users? Obviously we can't have the serial number leaking out to public like this. Luckily this came up while testing the installation.
The registration file seems to be in a correct location (/Library/Application support/Adobe/Lightroom/Lightroom 5.0 Registration)
The color space on the selected images appears to be changing when I use the Lightroom flash gallery in the web module of LR4.1. This stays the same when the gallery is uploaded. In previous version of LR I have seen color changes in the web module but they have been corrected (and correct) when the gallery is uploaded to the 'net.
I have read that this was (previously) a problem with the flash gallery specifically becuase it was not colour magaded, but I understood that this had been corrected for LR4. As far as my use is concerned it's actually more problematic now than it has been previously.
Im using Adobe Photoshop CC. Everytime I click Liquify a black screen appears instead of the image.I'm using Dell Inspiron 5520.
View 1 Replies View RelatedI just bought Lightroom 4 (student version) and fully registered it. After importing photos to the library, nothing appears in the filmstrip on the bottom of the screen. Do I need to turn something on to make them appear? It is making navigation much more difficult while developing (I can only view one image at a time while developing).
View 3 Replies View RelatedI don't want to appear dense but Lightroom 5 appears to be stuck in full screen (Windows 7 64 bit). The FILE, EDIT, ... drop down menus only appear after carefully hovering near the top of the screen and the minimize, full screen, and close buttons never appear. I don't want to close LR to check email, browse, or kill time while it is rendering previews.
View 1 Replies View RelatedHow can I get my image to center in the Print Preview window? (Epson R2000, 12 x 12, borderless). No matter where or how I change the settings, the Print Preview window shows my image has been cut off on the right hand and bottom edges. Hence, I cannot get a 12 x 12 borderless image to center on a 12 x 12 sheet of scrapbook paper.
View 7 Replies View Relatedwhat I'm doing wrong when the plan I'm trying to 'x-ref' into the main drawing appears all stretched (and massively overscaled).?
View 7 Replies View RelatedJust recently I have been getting a 'dead space' in the center of my workspace in LR4. Whatever tool I am using will not work in the center of the screen.
View 4 Replies View RelatedWhen i use an adjustment brush it will not work when I move the cursor to the center of the screen, in the rest of the image, and when I move or zoom the image it will work, so I can use the adjustment brush anywhere in the image, as long as it is not in the center of the screen.
View 1 Replies View RelatedI have been using lightroom 4. At first it decided that the center image just wouldn't display on some photos. The previews look fine, the selected photo preview seemed to work, but the center image would just gray out like there was no photo at all. I tried to uninstall several things, updated my video drivers, even changed virus protection just in case but nothing worked.
I have the creative cloud, so I uninstalled version 4 and upgraded to version 5. Went into my catalog and almost exactly the same thing started happening. This time, I can see unedited photos, but if I apply a preset the image disappears again. If I click off the photo and click back I can see the image unedited in the main window and the previews show it with the edits. Sometimes I can see the edited photo but at low resolution, but it will not sharpen up to the full image. I even cleared my preview cache just in case but nothing seems to be working.
I don't want to have to re-install windows just to try fix this.I should not that the only thing that changed is that I installed a new Epson printer in windows. I have now uninstalled all but the driver for that printer and still have the issue.
Lightroom 5 slideshow.
After selecting "Preview" only black screen.
The slideshow don't work.
This is a incosistent problem, in which I cannot determine why it's happening and it doesn't happen all the time. I often restart Lightroom and it is ok after that.
In a small area of the screen the curser doesn't function. I cannot select an image or anything in that area while in the library module and when in the develop module brushes change back to the arrow icon and don't allow me to click in that area.
This is my first time using Lightroom and am currently using version 4.3 that I downloaded from the Mac App store. I am running a new MacBook Pro with OS 10.8.2 Mountain lion.
I can't seem to click and drag an image with the mouse when using Full Screen Preview under the Edit Tab.
I see the hand icon and the scroll bars when the whole image can't fit on the screen but when I left click it's like I hit the Esc button.
Clicking the scrollbars will work but isn't as convenient. Under the Manage tab it works correctly. I have reset the workspace with no luck.
I use this feature a lot and would like to know if others have this problem.
The problem existed in X5 SP2 and now X5 SP3.
I'm having some fits with the constrained orbit center. It seems to me that It used to always be in the center of the screen when I would use Shift and CMB. Now it seems to be stuck on the center of my assembly/part. I know that I can hit F4 and long select LMB to re-center but I have never had to do that before the last day or two. I have uninstalled all the Beta Add ins I had installed and I have even uninstalled and reinstalled Inventor Pro 2014.
Is there an option somewhere that puts the default Orbit Center to the center of the screen?
Is it possible to add button in the main tool panel of AI cs6 using javascript?
or is there any other way of adding the ui component to the tool panel..
is it feasible??
Lightroom 4.3 import screen does not seem to be able to enlarge for better viewing the preview thumbnail from a Canon G15 raw CR2 file?
View 1 Replies View RelatedLR version - 4.2
OS - OS X 10.8.2
I've just moved to a new computer and also I've just started using LR4. Since moving I've had a few of my imported images display the 'The image appears to be damaged' message when in develop mode.
The image appears undamaged and I can edit and export without issue, if I copy the image on disk the copy will also cause the message to appear however when I copy the image to another computer (running Windows 7 and LR 3.3) and that doesn't report the image as damaged.
I'm not too sure what causes LR to report the image as damaged also I don't know why the image would appear damaged on one computer and not on another.
I'm trying to edit a set of titles made in Premiere in After Effects, and after I import the file (as a Premiere file) then load the sequence into the timeline; the preview is just a black screen throughout the entire preview. The titles never show up.
View 2 Replies View RelatedI have several raw images that were imported directly from the memory card into LR5 as DNG files. They look fine in the Library mode - both in Grid and Loupe view, but when they are opened into the Develop module they have gray and pink boxes as if information is missing and I get an error message saying "image appears to be damaged".
Is it really damaged or is there a way to resolve this? When I look at the file itself through Finder it shows the damage, so I'm thinking it's damaged but somehow the previews aren't?
Just want to understand before I import again or start editing only to lose more pictures. Is it a bug?
We recently installed extra RAM only to find out it wasn't compatible with the Mac. We have the correct RAM in there now, but I don't know if I should uninstall and reinstall LR5 or if it should now be fine with the new RAM or if it's totally unrelated to the RAM.
When I save artwork as a tiff or jpeg, the preview appears in the negative or reversed color. It opens up fine in Photoshop, but why does it not view correctly in my documents as a thumbnail?
View 1 Replies View RelatedI am using Autocad 2011, when I do a render nothing appears in the Render window. I have material applied to the solids, but the window remains black.
View 5 Replies View RelatedWhen initiating the hatch command H at the command line my panel changed to the hatch panel. Now the command opens the more traditional hatch dialog. I don't how it happened, but just when i was getting used to the panel.
When editing a hatched area the panel appears. Why when I stretch some hatched geometry does not the adjacent hatch stretch with it?
How can the color of the main Gimp screen be changed? Mine's gray and I want it black.
View 3 Replies View Related