Lightroom :: Cannot See Develop Changes Happening On Main Center Image
Oct 4, 2013Suddenly today, cannot see the develop changes happening on the main center image, only on the filmstrip at bottom? Is something set wrong?
View 1 Replies
ADVERTISEMENT
Lightroom :: Main Develop Module Controls Have Disappeared From Develop Window
Feb 11, 2014The main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
View 2 Replies View RelatedLightroom :: Selected Image Appears On Main / Center Panel But Not In Preview Screen
Mar 14, 2012The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference.
View 13 Replies View RelatedLightroom :: 5 - Photo Edits Not Showing In Main Window Of Develop Module
Jul 27, 2013I just now installed LR5, converting my LR3 catalog to LR5 catalog. Everything seemed to go fine. I picked one photo and converted to the 2012 process. The new sliders appeared.
The problem: Any changes I make are seen only in the Navigator window, not the main window. I figured there had to be a simple fix, but I've scoured the web and can find no one having similar problems.
Lightroom :: Main Image Greyed Out Or Not Showing At All?
Oct 29, 2013I have been using lightroom 4. At first it decided that the center image just wouldn't display on some photos. The previews look fine, the selected photo preview seemed to work, but the center image would just gray out like there was no photo at all. I tried to uninstall several things, updated my video drivers, even changed virus protection just in case but nothing worked.
I have the creative cloud, so I uninstalled version 4 and upgraded to version 5. Went into my catalog and almost exactly the same thing started happening. This time, I can see unedited photos, but if I apply a preset the image disappears again. If I click off the photo and click back I can see the image unedited in the main window and the previews show it with the edits. Sometimes I can see the edited photo but at low resolution, but it will not sharpen up to the full image. I even cleared my preview cache just in case but nothing seems to be working.
I don't want to have to re-install windows just to try fix this.I should not that the only thing that changed is that I installed a new Epson printer in windows. I have now uninstalled all but the driver for that printer and still have the issue.
Lightroom :: Image In Library Changes To Another Image In Develop Module
Nov 11, 2012I can see a previously processed image in the Library module. When I try to open that image in Develop, it changes to another image in the same folder. This only happens with certain images.
View 7 Replies View RelatedLightroom :: Edit Image In The Library Is Not The Same As The Image In Develop?
Feb 6, 2012My edit image in the Library is not the same as the image in Develop.. How do I get them to be the same image? I want the image in Develop.
View 1 Replies View RelatedLightroom :: Cannot Locate File When Image Goes To Develop
Jan 30, 2014i have lots of images on cd. i have tried to import the images from CD. the images are in the catalog. But light room did not save the full image. maybe only a thumb nail and a pointer to the address location of the file. it can not find the file since it knows that it was imported from a cd.
View 3 Replies View RelatedLightroom :: Develop Module Image Reloading?
Jun 22, 2013While editing a TIFF file in the Develop module, the image keeps reloading (image flashes off and on), and the adjustment sliders revert to neutral settings. Makes any editing very diffficult! Windows 7 64-bit 8 GB Ram.
View 1 Replies View RelatedLightroom :: Select Image In Develop Module
May 31, 2013I shoot in RAW. I import an image into lightroom 4.4. I select the image in the Develop module. The image loads very nicely, but within one second of the image opening on my screen, it becomes much softer and slightly lighter. It does it with every new image.
View 2 Replies View RelatedLightroom :: 4.1 Low Quality Image In Develop Module
Sep 28, 2012I have a macbook pro with retina display, in my lightroom 4.1 the images in the library look normal but when i go to develop module the image is blurred and very low quality. In settings the rendering are high quality 2048 1:1
Any way to fix this? Also in my external monitor i notice this thing with minor loss.
Lightroom :: Unable To See Image In Develop Module?
Jan 28, 2013I had Lightroom 3. I just got a new computer and installed LR 4.. In the Library module, everything looks fine. When I switch to the Develop module, I can't see the image--just a gray rectangle. The Develop module works, as any adjustments I make are visible when I return to Library, but I can't see what I'm doing.
I'm using Windows 7 Ultimate, 8 GB memory, 64-bit, 970 GB free out of 1.8 TB, and working on RAW images.
Troubleshooting checklist:
1. When you go to Develop, do you see a blank filmstrip?" No. The photos appear in the filmstrip.
2. Does the problem happen regardless of which folder or collection you have selected in Library?" Yes.
3. If you import a new set of photos (that weren't in the original LR3 catalog), does the problem happen with those?" Yes. 4. Do you use stacks in library?" No.
5. If you export a portion of the catalog (a collection or folder, perhaps), then open the exported catalog, does the problem still happen?"
Lightroom :: Why Doesn't Image In Develop Module And Exported One Look Same
Mar 17, 2014When I export an image from the Develop Module, I'm having a problem with it being 1.5 to 2 stops darker than the original.
View 10 Replies View RelatedLightroom :: 5 - Selected Image Does Not Display In Develop Module
Jul 8, 2013I recently upgraded to LR5 from LR4.1. I have seen on several occasions where the selected image in the Develop Module does not appear. I can move back to the LIbrary view and the image appears, but when I switch back to the Develop Module, the image disappears and only a black box appears (dark grey really). This seems to happen after I have deleted flagged files using the ALT-Backspace shortcut. This has happeded when I deleted while in the Library and Develop Module, but does not happen every time. I have disabled the "Show photo on Mouse Over" view option. Prior to that, the preview window shows the selected or moused over photo.
The only thing I can do to get the develop module to work again is to restart Lightroom. It is very annoying when trying to go through 4000 photos!
Lightroom :: Difference In Image Quality From Develop To Library?
May 2, 2012I'm a light room noobie (as in I downloaded it 2 days ago). I'm loving the experience so far, however, I have a quick question, I have edited a few photos I took at a gig, I've developed them, however, when I look at them in Library, there is a loss of sharpness in some, in others where I've reduced noise in Develop, there is still noise when viewed in Library.
View 8 Replies View RelatedLightroom :: 4.3 Continuously Refreshes Image In Develop Mode?
Feb 20, 2013I am using LR 4.3 with Photoshop CS5. I have found that after editing a picture in photoshop (transfer from CR2 to .TIFF file) it correctly transfers back into LR as an updated .TIFF file with all edits from PS. However, on further editing of the picture in LR the image is refreshed after EACH edit (ie. file reloads into LR taking a few seconds). If I am trying to apply an edit as the refresh starts then that edit gets lost i.e. NOT applied. The refresh happends after ANY change to the file. It is very frustrating as it wastes time and makes editing slow (have to keep waiting for a refresh). It does not appear to happen in that way when editing CR2 files.
I have only noticed this feature since installing V4.3 although it may have been happening in previous versions.
I am using W7, i5 2.5 Ghz processor and 8 GB ram with dual screens.
Lightroom :: Image Doesn't Come Up / When Switch From Library To Develop Module
May 21, 2013The image does not come up when i switch from the library to develop module.
View 1 Replies View RelatedLightroom :: Image Info Blighting Photos In Develop Window?
Jun 23, 2013an image number date and time has appeared on my photos in the top left hand corner while i'm in develop / lightroom.
View 2 Replies View RelatedLightroom :: How To Save Image(s) After Processing It Under Quick Develop Module
Jul 24, 2013I need to know how to do the above procedure in lr5 as when i did the processing of one image i saw no tab to click to save the image or move the image or clicking done?
View 4 Replies View RelatedLightroom :: Image Appears To Be Damaged Message In Develop Module
Oct 17, 2013I have several raw images that were imported directly from the memory card into LR5 as DNG files. They look fine in the Library mode - both in Grid and Loupe view, but when they are opened into the Develop module they have gray and pink boxes as if information is missing and I get an error message saying "image appears to be damaged".
Is it really damaged or is there a way to resolve this? When I look at the file itself through Finder it shows the damage, so I'm thinking it's damaged but somehow the previews aren't?
Just want to understand before I import again or start editing only to lose more pictures. Is it a bug?
We recently installed extra RAM only to find out it wasn't compatible with the Mac. We have the correct RAM in there now, but I don't know if I should uninstall and reinstall LR5 or if it should now be fine with the new RAM or if it's totally unrelated to the RAM.
Lightroom :: Image Disappear In Develop Module After Deletion Of Other Images?
Sep 21, 2013In Lightroom 5 and 5.2, when using the X key, then Delete Rejected Photos, the central display box no longer displays an image. If I switch back to Library mode an image will appear but if I go back to the Develop module, again it's a blank screen! If not, how do I report this directly to Adobe?
View 12 Replies View RelatedLightroom :: Develop Module - Possible To Export Changes Made To Image Recorded Under History Tab?
Jan 29, 2014Under the Develop Module is it possible to export the changes made to an image recorded under the History Tab?
View 1 Replies View RelatedLightroom :: 5 - Moving Develop Module Sliders Blurs Image For Moment?
Aug 5, 2013I'm evaluating Lightroom 5 during the 30 day trial and it's all cool except for this one big annoyance that I noticed immediately when trying to work on an image in Develop module. As stated in the title, moving any slider (exposure, highlights, noise reduction, etc.) causes the image to go very blurry for the duration of the slider movement. It goes immediately back to being sharp as soon as I stop moving the slider. This is super annoying, feels as though my eyes are going bad.
What's interesting is that the problem doesn't show up when I'm adjusting the Tone Curve directly, but it will get triggered if I'll expand and use the sliders underneath. So looks like a bug that only applies to sliders.
This doesn't happen at all in Lightroom 4.4, which I still have installed and can compare side-by-side.
As for the hardware, I'm using the 2013 Macbook Air with 1.3 GHz i5 CPU and 8 GB of RAM. The OS X version is 10.8.4 with all latest upgrades installed.
I've already tried optimizing the catalog, giving it more space (currently at 3 GB) and purging it. I'm not using Smart Previews, although I've turned them on for a moment to see if the problem persists with them on - it does. I've also re-rendered the 1:1 preview for the specific image I've been trying it on. Btw, the file is a NEF from Nikon D300 and I'm using the 2012 process (as was the case with LR4). Not sure what else might be relevant here.
Lightroom :: Image On Screen Changing When Switch Between Library And Develop Modules?
Jul 6, 2012I've noticed in the past couple of days that I will be refining an image in the develop module, feel I've gotten it the way I want it to look, and then switch back to the library module to export. When I do so, I notice the colors are quite different than they were just a second ago in the develop module. When I switch back to the develop module, it goes back to the way it looked in the develop module. How might I fix this?
View 4 Replies View RelatedLightroom :: Basic Develop Tab Has Disappeared In Develop Module?
Jun 29, 2013I can't process any images as the basic tab has suddenly vanished.how can I get it back?
View 3 Replies View RelatedLightroom :: Center Single Image Within Page In Print Module?
Jul 3, 2013I am using LR5 and am trying to print a single image using print package in the centre of the page, equal borders on all 4 sides.
View 2 Replies View RelatedAutoCAD .NET :: What Is Happening In DocumentCreated
Sep 23, 2012This is unexpected. I have a custom application class called TheApp. In it I have a private bool property called IsAssembly. In my command I set this value to true then create a new document. In the event handler, I check to see if the IsAssembly is true but it returns false. The only places this property is set is in the command and the event handler.
[code]
[CommandMethod("IFX_NEW_ASSEMBLY", CommandFlags.Session)]
public void NewAssembly()
{
IsAssembly = true;
Application.DocumentManager.Add(null);
}
[/code]
I have a handler for DocumentCreated
[code]
private void OnNewDocument(object sender, DocumentCollectionEventArgs args)
{
if(IsAssembly)
{
....Do something.
IsAssembly = false;
}
[/code]
AutoCad 3D :: Trimming One Solid With Another - Not Happening
Jun 9, 2012I am trying to model an electrical junction box but just cant trim some of the unwanted portions inside the junction box.
I have placed two solids, one merged into the other so that there is no gap between them and the transition is uniform. now i want to remove the extra bit of piece left inside.
surprisingly the trim command is not working ...
ACAD-electrical fittings.dwg
AutoCAD 2010 :: Selection Before Command Not Happening?
Dec 7, 2012I am not able to select item and then click command icon. Every time a command has to be started and only then the items to be selected. Drafting speed has reduced. also properties toolbar is also not working. basic props like col, lay etc can not be changed from the drop down menu.
View 3 Replies View RelatedPhotoshop :: CS4: No Image In Main Window When Using...
Nov 16, 2008I am using Photoshop CS4 on a 32bit vista Q6600. When I installed CS4, I had a graphics card based on a 8600GS. Photoshop run fine, even in openGL.
Not I upgraded the graphics card to a 9600GT for better performance. CS4 still starts, but when a photo is loaded, the photo appears correctly in the navigator, but the main window where the photo usually appeared remains grey, as the background. When moving around this window, the photo appear, but as soon as I release the mouse button, the window turn grey again...
When I deactivate openGL in CS4, everything seems to work.
I am having the latest NVidia drivers installed 178.24 (with both graphics cards).
I tried to reinstall the driver, no change.
I tried to reinstall CS4, no change.
getting CS4 work in openGL with this 9600GT?
Photoshop Elements :: All Tools Show Up As Pencil - Keeps Happening
Aug 18, 2013Just started up Elements 11 and the same issue as one month ago happened. All tools show up as a pencil, wether I want to select, clone, resize, doesn't matter, I only can draw a line. Last time I spend a whole night online with support and I had to de-install Elements and re-install.
But I really do not feel like this is how a system should work that every month I have to reinstall the program.