Ive attached 3 images, I want to turn a colour photo of something into a line drawing like the "untitled2.jpg"
My attempt is untitled1.jpg and Im not altogether happy with it. Is there a tutorial for this?
I'm starting with a colour image which I can transform into greyscale ok, but I want to retain a portion of the image as colour........
View 3 Replies View RelatedNewbie question but couldn't seem to find the answer using the search fxn.
With the pic below, I want to have a greyscale background but have a colourful blue colour for the bunch of grapes. I am able to create the greyscale background by using:
Image > Mode > Greyscale
but I don't know how to add realistic colour to the grapes. The colour I add seem to look cartoon-like.
I want to learn how to isolate a colour and turn the rest of the photo balck and white using
1) a RAW file photo and
2) a PSD file photo.
I have a grayscale tif of a golf ball that I want to turn into one PMS color vector art, using only screens of that PMS color. I can convert it to vector easy enough but having no luck getting it to my chosen color.
I tried Illustrator support but some of the dialogue boxes they reference don't match what's there.
I am converting a photoshop doc to greyscale and saving it as an eps. when I place that eps into illustrator and try to print separation the eps is coming out in 4 color instead of just black. if I save that same file as a tiff and place it in illustrator it prints in just black. if someone else in my office opens the eps in photoshop and saves it again then it will print in only black. is there a setting somewhere in photoshop that i am missing that will fix this and allow me to save the greyscale eps correctly.
I am running photoshop cs.
is it possible to adjust the greyscale so there is a little color in the photo?
View 2 Replies View RelatedI have several greyscale masks that I've downloaded. The only way I know to get the greyscale mask into a photoshop document is a method I found on about.com:
1. Open mask, select all, copy
2. Activate Photoshop document, Q for quick mask mode, paste from step 1, Q to exit quick mask mode, then click the layer mask mode icon in the layers palette.
This works fine, but is there ANY other way to get a save greyscale mask into a Photoshop document?
I convert a color jpg to Greyscale in Photoshop CS2 and it looks great on the monitor. Yet when I print it I get a lot of green tinting. I am using Windows XP service pack 2 and an Epson Photo Stylus 260 printer.
View 2 Replies View RelatedAnyone know how I can convert the above images into a
black and white/greyscale image?
Every time I convert an image/psd/tif to greyscale inside photoshop or in ACR my levels sliders and curves are inverted such that whites are on the left and blacks are on the right and everything is upside down (raising the curve on the black side lowers the blacks, lowering curve on white side raises the whites etc). This never happened to me before but happens every time now, I'm not sure what button I've hit to make photoshop do this.
View 1 Replies View RelatedI have a picture, and I want it to move smoothly from full color to full grey scale.
When I combine to pictures, I add a layer mask, and use a gradient to make the opacity move smootly from 100% to 0%
Can I use the same technique, with a gradient, to smoothly remove color from one side of a picture?
So... what I want to do is give every player a yellow-red shirt. What I did with the palyer on the right: I just re-brushed the red and yellow on a new layer above the shirt and set the layer-style on "color" and the opacity around 80%. So far so good...
Then I wanted to do the same for the other players... But I just can't get it right. Ofcourse the problem is that the greyscale-values behind the color-layer are different every time.
I need to create a greyscale step ramp gradient for use as a map in after effects.
I was hoping there was some automated way to do this. I don't think I could find it in the actions palate.
I have got a picture of beautiful woman. And? How to make a part of picture in greyscale? For exemple - arm. I selected this part and clicked on greyscale. And? The whole picture is in greyscale. Wh? I tried make a quickmask but the greyscale mode is not active.
View 4 Replies View RelatedIve seen some cool photos that are all in b&w except one part (eyes, hair, clouths, etc..) How do you do this exactly..
View 3 Replies View RelatedI had edited an image in a layer. It is a full color image. When I dragged & droped it into a totally different photo, suddenly it appeared in greyscale. The original image in its original layer is still full color. This has never happened to me before.
View 1 Replies View RelatedWhenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am working with 16bit (Tiff) greyscale Heightmaps, images that displace geometry to create terrains.When I want to adjust the images I do it in one of several applications that return the Heightmaps with an altogether different range of levels (value of blacks and whites). However I have no way of matching the levels of the updated image to the original except to eyeball it using Levels. This is time consuming and hard to get right.
I tried changing the images to RGB and color matching them, which is kind of what I want to do, but it leaves me with stepping (similar to an 8bit image) because the range it is trying to match is so subtle I think. how to better use Levels to perfectly match (greyscale) images?
All other controls work fine until i use the grey scale tool. All other options/controls become inactive including close and minimize. I have to use ctrl+alt+delete to exit.
The main reason I use grey scale is to be able to use the arbitrary rotation tool. Is there away to use arbitrary without using grey scale?
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I am having a problem creating smooth 3D images.I have been taking a 16-bit greyscale image with a various domes and other shapes with systematic gradations of greyness 'impressed' onto it. From this, I use the "create 3D mesh from greyscale" to create a surface whose depth is based on the values in the 16-bit greyscale image: this greyscale image becomes the "Background Depth" layer in the 3D image. I then add a Background layer (that exactly matches the greyscale image) to the 3D image, which will determine how the 3D shape will be coloured.
I then force ray tracing using the "Quality: " "Ray Trace Draft" or "Ray Trace Final" and the result is a 3D surface with some shadows. Okay so far, BUT the surface is a bit pitted, a bit ragged, not smooth, the shadows have jagged bit in - it's just not very good, in fact, it's unusably poor. Even if I apply some filtering to the greyscale image to smooth out any nasty discontinuities there may be in it, the final 3D surface is still pitted, with jagged shadows etc.
If I look at a wireframe version of a 3D image, it is clear that the resolution of the starting image is better than that of the wireframe image: there are several points in the original image to each point on the wireframe image (that is to say, each vertex in the triangles that make up the wire frame image is several points away from each other vertex).
When I look at the sample images in tutorials etc they look incredibly smooth and appealing. Why cannot I produce the same quality of image? Are there some settings in the Edit->Preferences->3D panel that I need to reset? Some way of increasing the number of triangles in the wireframe model?
I have posted a sample of the grayscale image, and a sample of the 3D image that this greyscale image produces when converted into a mesh. (I've saved them as JPG files, which forces the 16-bit greyscale into 8-bit mode. But the original conversion to a mesh was performed using a 16-bit greyscale image).
I am using windows 7 on an HP Pavilion Laptop, using OpenGL to draw the graphics.
I am desiging labels for a vinyl record.
I had a rough deisgn to i converted ot greyscale but then no option for dutone was available.
So I made a new greyscale file...import the layers i want into a new psd file made to be the right size i require.
then convert to greyscale and save
but i still have no option to make duotone...
With other files not included the layeres i have imported in it works but not with these.
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedIs there a tool in Draw or Paint to invert a greyscale; in other words to make a photo 'negative' from a positive image (and vice-versa)? I seem to remember using such a tool some years ago but can't find it anywhere - if indeed it ever existed!
I've got a bunch of very old negatives and need to convert them.
Paint Shop Pro X2. How do I convert from RGB 8 bit to Grayscale 8 bit?
View 1 Replies View RelatedI am having trouble colorizing a greyscale image. I actually did manage to do it earlier but can't remember how I did it. See attached the greyscale original image and the colorized pink image that I had created earlier. I tried inverting and colorizing but I can't seem to find the right setting. I also tried to create a pink layer and change the blend mode to color.
View 4 Replies View RelatedSometimes when I have an object selected and I go to select a fill color for it, the object turns a corresponding shade of grey, even though I'm selecting a color from the color picker.
Other objects on the artboard have color, so it doesn't seem to be a global setting....
Whenever I use this to convert a colour image (or even a black and white one) to greyscale, the image takes a leap in brightness (gamma?), despite the Preview showing otherwise. I've used the default (set at 15% dot gain), even taken the sliders down to -200%, it makes no difference. How do I maintain the brightness when converting?
PPX6 (64-bit)