Photoshop :: Converting To Greyscale Flips Curves
Feb 9, 2011
Every time I convert an image/psd/tif to greyscale inside photoshop or in ACR my levels sliders and curves are inverted such that whites are on the left and blacks are on the right and everything is upside down (raising the curve on the black side lowers the blacks, lowering curve on white side raises the whites etc). This never happened to me before but happens every time now, I'm not sure what button I've hit to make photoshop do this.
View 1 Replies
ADVERTISEMENT
Jul 28, 2013
Whenever I use this to convert a colour image (or even a black and white one) to greyscale, the image takes a leap in brightness (gamma?), despite the Preview showing otherwise. I've used the default (set at 15% dot gain), even taken the sliders down to -200%, it makes no difference. How do I maintain the brightness when converting?
PPX6 (64-bit)
View 15 Replies
View Related
Aug 6, 2013
I'm trying to print colour to my epsom inkjet but for some reason Illustrator keeps converting my colour image to greyscale.
Now I've been using Illustrator for years and this is a new problem I've not come across before. Is there something I can do to stop it doing it - maybe there's a setting that has accidentally switched on that converts all to greyscale.
If not then I suppose I'll have to revert to "turning it on and off again"!
View 3 Replies
View Related
Mar 8, 2005
I'm very new to Photoshop, and I was wondering if you can convert text to curves, so I can lose those pixelated edges when I enlarge the text for print. On my JASC photoshop program, I can simply select "Convert text to curves" from a pull-down menu. I remembered that I had Photoshop 5 on my old computer, and I like using it better, but I can't find this option. Sorry if this is a dumb question, but I just don't see it anywhere.
View 5 Replies
View Related
Jun 13, 2011
I'm tracing a picture of a boat using the beizer tool. Now that I'm finished I would like to select everything I did and turn them all into curves at once, but it will only let me select sections at a time...how come? Is there a way to selet them all and turn them into curves or do I have to select one section at a time?
View 2 Replies
View Related
Jul 2, 2011
When converting text to curves, it seems to move the text a fraction to the left. How to avoid this?
View 7 Replies
View Related
Jun 6, 2012
This is the second time I've had crashes in X6 64 bit, the first time was importing a very large "XLS" file, and then today while converting a selected group to curves it crashed. I restarted Draw opened the file that I had saved but not converted the part of the drawing I wanted to cut to curves, as soon as I tried to convert to curves it crashed again. Restarted the computer with the same results. I got the job to the cutter so it is not holding me up, but I did want to let the powers that be know about the crash. And I have been converting at least some of each drawing I do to curves with no problems, nothing had changed in the computer so it makes me wonder what's going on. The computer is a i5, 8 gb ram, 2 gb video card, Windows 7 Ult.
View 5 Replies
View Related
Sep 29, 2010
I'm new to Inventor. I'd like to create some text, and then convert it to lines and arcs. I can't find any way to do this, and now I'm wondering if this very simple task is even possible in Inventor?
View 6 Replies
View Related
Oct 30, 2011
I need to take a word, and edit each letter individually. This includes changing shape, color, and slanting and twisting a letter. I want the "i" to be one color, and the dot over the "i" to be another color.
In my old drawing program, I converted the text to curves, then ungrouped the set of letters. I can't seem to be able to do this in Corel. Once converted to curves, when I select the text, the option to ungroup is greyed out.
i am posting this only after doing fruitless research online.
View 14 Replies
View Related
Sep 8, 2011
I do not want the leader and label to flip. Is there a setting to keep the leader and label on one side? When I drag the left to a certain point the right note is the result. I want the bottom note to be the result.
View 5 Replies
View Related
May 23, 2013
I am using AutoCAD Civil 3D 2013 and just installed HotFix 3 (so I should be all up to speed). I have created a water linetype (---W---) and telephone linetype (---T---). The problem I am having is the 'W' and 'T' seem to flip at some of the nodes based on if the Polyline is going up or down (from left to right). When it is going up it displays right side up...going down it displays upside down. They are one single polyline with nodes.
I have tried REVERSE, PEDIT then Reverse, my linetype definition is set to U=0.0, but nothing has worked. I have redrawn other polylines and they all have the same issue.
Attached is a PDF of the polylines.
View 3 Replies
View Related
Feb 23, 2013
I am preparing a batch of images for test submission, for a stock photo library.Recently a person working for one of the visual effects studios in London happened to tell me that these strict agencies use some set of layers that can separate tonality and color values to check for banding, dirtiness, noise and all those technical flaws that the human eye can't notice on a monitor.He said they perhaps have an action for it so that they can review faster.
He said that it is known as 'Craze Curves' or 'Visibility Curves' technique.He further added that all the studios use it before giving the final files to clients so that there is no issue in printing afterwards.It is sort of a quality control check and has been used by digital and advertising agencies all over the world.
But now his email seems to have changed and I can't get in touch with him to know how to use the technique.
View 1 Replies
View Related
Dec 7, 2012
I'm having all kinds of trouble with these dynamic blocks.
This one should be simple, but I can't even get it to work! Please take a look at the drawing... when you flip it, it flips everything (as it should), but the stretch grip goes "up", instead of staying in the middle of the box in the flipped state.
View 2 Replies
View Related
Aug 17, 2012
When I do a horizontal flip of my image in the Develop module of Lightroom 4.1 and then go to the Print module and apply a text watermark, it displays correctly on the screen. However, when I print to jpeg and then open the jpeg file, the watermark has flipped horizontally. It displays as mirror image text and has moved from the lower right to the lower left of the image. And, yes, the image is still flipped as it should be. Is this a bug? For now I will do the flip external to Lightroom.
View 7 Replies
View Related
Dec 27, 2012
In "test" mode, this block works well except for the point of the arrow. If you stretch the line under the title, then move the arrow point to somewhere else, then flip it, the arrow point and its associated grip needs to stay put.
It actually does, the first time. BUT then if you move the arrow point again and flip it again, it does not.
Then, when I inserted it into another drawing, either with "insert" or via SSM, the flip doesn't stick to the point even the first time.
So I guess my question is how to flip it but keep the point where it happens to be when the flip occurs. Like a multileader, because what I am actually trying to create here is a multileader that has an annotative block with attribute fields, to be used with SSM.
View 9 Replies
View Related
Oct 31, 2005
I am converting a photoshop doc to greyscale and saving it as an eps. when I place that eps into illustrator and try to print separation the eps is coming out in 4 color instead of just black. if I save that same file as a tiff and place it in illustrator it prints in just black. if someone else in my office opens the eps in photoshop and saves it again then it will print in only black. is there a setting somewhere in photoshop that i am missing that will fix this and allow me to save the greyscale eps correctly.
I am running photoshop cs.
View 4 Replies
View Related
Dec 22, 2003
is it possible to adjust the greyscale so there is a little color in the photo?
View 2 Replies
View Related
Aug 7, 2007
I have several greyscale masks that I've downloaded. The only way I know to get the greyscale mask into a photoshop document is a method I found on about.com:
1. Open mask, select all, copy
2. Activate Photoshop document, Q for quick mask mode, paste from step 1, Q to exit quick mask mode, then click the layer mask mode icon in the layers palette.
This works fine, but is there ANY other way to get a save greyscale mask into a Photoshop document?
View 7 Replies
View Related
Jul 2, 2008
I convert a color jpg to Greyscale in Photoshop CS2 and it looks great on the monitor. Yet when I print it I get a lot of green tinting. I am using Windows XP service pack 2 and an Epson Photo Stylus 260 printer.
View 2 Replies
View Related
Sep 18, 2005
I'm starting with a colour image which I can transform into greyscale ok, but I want to retain a portion of the image as colour........
View 3 Replies
View Related
Apr 18, 2006
Anyone know how I can convert the above images into a
black and white/greyscale image?
View 1 Replies
View Related
Apr 1, 2004
I have a picture, and I want it to move smoothly from full color to full grey scale.
When I combine to pictures, I add a layer mask, and use a gradient to make the opacity move smootly from 100% to 0%
Can I use the same technique, with a gradient, to smoothly remove color from one side of a picture?
View 3 Replies
View Related
May 12, 2004
So... what I want to do is give every player a yellow-red shirt. What I did with the palyer on the right: I just re-brushed the red and yellow on a new layer above the shirt and set the layer-style on "color" and the opacity around 80%. So far so good...
Then I wanted to do the same for the other players... But I just can't get it right. Ofcourse the problem is that the greyscale-values behind the color-layer are different every time.
View 4 Replies
View Related
Jan 29, 2009
I need to create a greyscale step ramp gradient for use as a map in after effects.
I was hoping there was some automated way to do this. I don't think I could find it in the actions palate.
View 4 Replies
View Related
Feb 23, 2004
I have got a picture of beautiful woman. And? How to make a part of picture in greyscale? For exemple - arm. I selected this part and clicked on greyscale. And? The whole picture is in greyscale. Wh? I tried make a quickmask but the greyscale mode is not active.
View 4 Replies
View Related
Oct 29, 2005
Ive seen some cool photos that are all in b&w except one part (eyes, hair, clouths, etc..) How do you do this exactly..
View 3 Replies
View Related
Nov 11, 2007
Newbie question but couldn't seem to find the answer using the search fxn.
With the pic below, I want to have a greyscale background but have a colourful blue colour for the bunch of grapes. I am able to create the greyscale background by using:
Image > Mode > Greyscale
but I don't know how to add realistic colour to the grapes. The colour I add seem to look cartoon-like.
View 7 Replies
View Related
Feb 28, 2014
I had edited an image in a layer. It is a full color image. When I dragged & droped it into a totally different photo, suddenly it appeared in greyscale. The original image in its original layer is still full color. This has never happened to me before.
View 1 Replies
View Related
Sep 16, 2012
I am working with 16bit (Tiff) greyscale Heightmaps, images that displace geometry to create terrains.When I want to adjust the images I do it in one of several applications that return the Heightmaps with an altogether different range of levels (value of blacks and whites). However I have no way of matching the levels of the updated image to the original except to eyeball it using Levels. This is time consuming and hard to get right.
I tried changing the images to RGB and color matching them, which is kind of what I want to do, but it leaves me with stepping (similar to an 8bit image) because the range it is trying to match is so subtle I think. how to better use Levels to perfectly match (greyscale) images?
View 5 Replies
View Related
Jul 30, 2008
All other controls work fine until i use the grey scale tool. All other options/controls become inactive including close and minimize. I have to use ctrl+alt+delete to exit.
The main reason I use grey scale is to be able to use the arbitrary rotation tool. Is there away to use arbitrary without using grey scale?
View 1 Replies
View Related
Jun 14, 2006
Ive attached 3 images, I want to turn a colour photo of something into a line drawing like the "untitled2.jpg"
My attempt is untitled1.jpg and Im not altogether happy with it. Is there a tutorial for this?
View 9 Replies
View Related
