CorelDRAW Graphics Suite X6 :: Converting To Curves
Jun 6, 2012
This is the second time I've had crashes in X6 64 bit, the first time was importing a very large "XLS" file, and then today while converting a selected group to curves it crashed. I restarted Draw opened the file that I had saved but not converted the part of the drawing I wanted to cut to curves, as soon as I tried to convert to curves it crashed again. Restarted the computer with the same results. I got the job to the cutter so it is not holding me up, but I did want to let the powers that be know about the crash. And I have been converting at least some of each drawing I do to curves with no problems, nothing had changed in the computer so it makes me wonder what's going on. The computer is a i5, 8 gb ram, 2 gb video card, Windows 7 Ult.
I need to take a word, and edit each letter individually. This includes changing shape, color, and slanting and twisting a letter. I want the "i" to be one color, and the dot over the "i" to be another color.
In my old drawing program, I converted the text to curves, then ungrouped the set of letters. I can't seem to be able to do this in Corel. Once converted to curves, when I select the text, the option to ungroup is greyed out.
i am posting this only after doing fruitless research online.
When trying to open a coreldraw document sent to me containing fonts that I do not have, I cannot seem to open only as curves and it always wants to replace missing fonts. I am sure I could do this with X3, but not X5.
I just want to import as curves and not substitute fonts.
On using macro for "Convert to curves all text" the Page Number used with Insert Page Number in Coreldraw x6.4 is not converting it but it remove the page number.
I was working on Corel X4. I was using bickham font. After my design was done i did convert to curves but the whole font sort off just distorted completely.
The Join Curves docker seems like a handy tool, unfortunately following the directions yields no change--I can't get it to do anything at all. Is this a known issue? I have X5 with the latest SP, just installed a few days ago.
I want all the angled segments to be converted to curves at one despite of selecting them each one and selecting the convert to curve command. It should avoid the horizontal & vertical lines and any angled ones should convert to curves.
I have a series of points that I calculated (x-y data pairs, they're conic sections from calculus if that matters), and I want to import those points and then sometimes fit either a) a line or b) a curved rectangle (like, a really wide line) that follows these data points.
If this is possible to have a transparency brush in doing fades on curves. the brush would enable to lighten spot colors when brushed over the curve or curves. you could make a whole graphic fade out around the edges just by brushing over the edges.
You could have the capabilities to adjust the amount of the fade on a tool bar. maybe this is out there, but it would save a lot of time when doing graphics for t shirts and you want to fade the edges of the image on the shirt. you rip program would define the half tones by the transparency fade.
I have designed a very large document (a magazine) in Corel Draw 11 with text, drawings and photos. I started converting the text to curves but there's a couple of text columns that disappear when I do so !
When I select text I can't apply any changes to it until I convert to curves. I have tried selecting using the select tool and text tool - neither makes a difference until I convert to curves the everything is available
Looking for a nice script that can search a complex design with lots of linework and find all coinciding duplicates and select them all and delete them but leave (1) good copy.
Basically when I use Outline Pathfinder in Adobe Illustrator, then bring back into corel, sometimes get a lot of redundant objects. I already set the settings in Adobe Illustrator to minimize that as much as possible.
This isn't something I am in need of because in the future with this graphic I would just convert the background. Just wondering why it made those odd lines coming off of the words and the black bar (I don't know how the heck you guys can post large things, things with motion, etc. I have to make things miniature to put them on here)
I assume it has something to do with how the original, that came from MillerCoors, has those layers of lines in it. I just don't get why lines would then be visible when I changed it since nothing like that has happened before. Oh, and if you are wondering why I converted it, it's because I knew my rip server wouldn't like all that stuff going on in the original
I have to convert some documents form cdr to Al but ran into a problem. The cdr documents are better then 2 pages long/ big when I try to convert them into AI it tells me that it dose not support more then one page. is there a way to convert all my pages other then one page at a time?
I had recently downloaded CorelDraw 6 upgrading from CorelDraw3. I'm guessing that the CD6 automatically converted all my files that were CD3 to CD6...Any who...I decided that I like corel draw 3 better and redownloaded it. Now I can't open my CD3 files now..Even though my files says CD3 I still can't open them.
Corel X4. While the images on my screen appear as I want them, and will print true to their colors on my printer, when I convert the files to pdf, jpg or eps formats to send out, the colors lose their vibrancy and appear (and reproduce) washed out. It seems as though it's something in the conversion process.
I imported a digital picture into a CorelDraw document--it looks great in the document. When I converted it to a PDF, the picture quality looks terrible.
I have a BMP image that is part of a larger logo that I need to be cut out on my inline cutter. The problem is, when I convert the whole logo to the plotter file, the BMP image does not show up. I have tried using the outline trace to convert the BMP to a form my plotter will recognize, but when I save the file, it saves it with a white background that shows up in my plotter image. This white background messes up the whole logo.
Is there any way to save the file where the image has a transparent background? I have been saving it as a .cmx file and there is no option to save it as a transparent background.
I have a logo that I need to cut. I have tried scanning a hard copy and I have also tried using an attachment to convert to Corel Draw3 with no success. What are the steps necessary to convert from a scanned copy or from an attachment to Corel Draw3?
