Photoshop :: How To Apply Similar Transformation Of One Layer To Another Without Duplicating
Mar 1, 2013
I have a sample 3d eCover and I want to fit an image over the front part. However, I'm having a hard time transformating my image to perfectly the front layer. Is there any option to apply the same transformation of my front cover layer to my image?
Additional info:
1. The front cover layer of the 3D eCover is not yet merged with the other layers. So, I can still edit it.
2. I'm using Adobe Photoshop CS6.
View 3 Replies
ADVERTISEMENT
Feb 10, 2009
Every time you duplicate a folder or a layer, it adds the word "Copy" at the end. Is there a way to get rid of this?
I've been looking for a solution to this for the past 2 years. I spend 8 hours a day in Photoshop creating Comps. I'm crazy about having my layers clean, therefore I use a lot of folders, etc.
I probably waste an hour a day removing the $%)?#* Copy word at the end of layers/folders. This is driving me CRAZY while losing a lot of precious time.
View 4 Replies
View Related
Aug 8, 2013
Is there any way to say to PS so it will duplicate X layer to "document -1"? When I record and duplicate it saves it at strictly to Y document not to "document" -1 or +1 or +x.
View 7 Replies
View Related
Aug 7, 2013
Unless PS has been updated to make this a feature, i may have found a bug. Now (in CS6 vs. previous versions) when you duplicate a shape layer, if you had previously selected specific points of the shape (for example with the direct selection tool) only those points will be duplicated in the new layer. This is true no matter what tool you are currently using.
What I did was make a rounded-corner rectangle shape -> then direct selected all points on one side to stretch the rectangle without distorting the rounded corners -> then switched to the move tool so no points were selected anymore and only the layer was selected-> duplicate layer (with the intention of duplicating the whole shape). what i got was just the rounded corners on a new layer.
It seems the only way to duplicate the shape layer in its entirety is to go back with the direct select tool -> select ALL points of the whole shape -> change to move tool -> dupe layer.
If that's the intended new functionality, it's a bummer because if you intend to only duplicate certain points, you can already do that while using the direct select tool. Using the move tool, it shows no direct selections and therefore you should be able to duplicate the whole layer.
Maybe I have some weird default option checked that I'm not familiar with? This is not how any previous versions of PS worked and will add friction to my workflow if this is new.
View 5 Replies
View Related
Jul 15, 2012
In order to make a copy of a layer. I know I make a copy of the layer, but then I'm having issues taking the layer, and reversing it horizontally so that I can create a new layer using the previous copied layer. I don't know what I'm doing wrong, and I've been experimenting with it. I'm now able to create really nice and curvy looking hills, but still just not able to copy it, and reverse it.
View 2 Replies
View Related
Nov 6, 2013
It's duplicating the layer style along with the layer which is fine but now when I change the style on one layer it changes all of those other layers as well. Is there a way to turn this off? I even tried removing the style and adding it new and it still changes the original!
View 1 Replies
View Related
Dec 22, 2012
Using Elements 11 I am trying to duplicate a layer on a psd file, however none of the options are available (they are all greyed out). Why is this?
View 2 Replies
View Related
Oct 8, 2012
Every time I rotate a layer, that layer is copied and then rotated. How do I just rotate a layer without making copies? i'm using CS5 with the latest updates.
View 2 Replies
View Related
Aug 1, 2012
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies
View Related
Jun 30, 2012
I want to create a plug-in that will improve detail in under- and over-exposed areas of photos, but I can't get as far as duplicating a layer. I'm new to GIMP plug-ins. My plug-in below is intended to create a copy of the image's layer and add the layer to the image.
The plug-in will register in Windows 7 (GIMP 2.8) but won't register in Ubuntu 12.04 (GIMP 2.6.12). In Windows, the plug-in gives an error. I don't get an error if I comment out line 8: Code:
View 2 Replies
View Related
Jun 12, 2013
I use a lot of adjustment layers and they're often applied to the previous layer. Is there a keyboard shortcut to automatically "Use pervious layer as clipping mask" without going through the dialogue box or manually applying in the layers palette(Option-click between layers)?
View 5 Replies
View Related
Feb 15, 2013
I have a bunch of objects on a particular layer, and they're all different colors and linetypes and lineweights, and i want them to all take on the color / linetype / lineweight that i chose for that layer.. how do i do this?
View 1 Replies
View Related
Feb 6, 2013
How to compare two similar solid model and found where its differetiate is, and how to compare two similar drawing let say rev.1 to rev.2 and found where its differentiate is?
View 1 Replies
View Related
Sep 24, 2013
So I need an sub assembly similar to the SuperLayerVaryingWidth, but combined with BasicLane Transition sub. If the SuperLayerVaryingWidth sub would follow an ETW profile to set slope, then I would be set. Any tips on how to create this? I'm pretty rusty at building custom subs.
View 2 Replies
View Related
Jul 27, 2011
Can I load a selection and use that to paint on the mask somehow?
View 5 Replies
View Related
Dec 19, 2012
I ran to a little trouble using photoshop today. I wanted to get rid of the "adjustment layer" but leave the effects.
For example:
I have two layers and I want to apply the adjustment layer effect to them. I don't want to leave that "adjustment layer" on top of everyone. I can't use groups because my real project is too complicated. By the way, applying the adjustment layer to all of them means all the layers remain an image but they have been modified (for example: color, black and white, etc.).
View 1 Replies
View Related
Apr 12, 2006
how to apply a layer style/setting? I have a saved layer setting and whatnot but i cant seem to put it on another layer on another document.
View 1 Replies
View Related
Aug 18, 2004
Is it possible to apply a mask to an effect on a layer only, without masking the original layer features themself?
For example, I have a layer which I've then applied a stroke layer effect to. How can I mask parts of the stroke without affecting the original layer?
View 3 Replies
View Related
Apr 23, 2013
I have done this before but not today! The preview button is checked but I can't see any drop shadow appear. I have duplicated the background and extended the canvas 110% as in the past.
View 1 Replies
View Related
Oct 18, 2013
There's a new feature where you can opt to drag a layer mask to the trash and NOT be prompted to "apply layer mask?". This also has the "do not show again" option -which I clicked by accident. So the default is now to apply layer mask when I drag a layer mask to the trash. I can't think of any way to restore the more traditional function, without restoring all other prefs.
So what I would like is a way to restore the more classic default where dragging a layer mask to trash give me the OPTION to apply or discard.
View 2 Replies
View Related
Jul 28, 2012
I have 75 different images and would like to apply 4 different hue adjustment layers to each image and save them so I have 300 new images.
Idea on how to do this is;
Copy hue adjustment layer Merge the lower hue layer with the top image layer. Name the merged layer to what the image layer was Save newly merged layer and image layer in PNG format.
Doing this 300 times manually will take me an age, are there any scripts for CS4 that can automate this?
View 7 Replies
View Related
Sep 4, 2013
I have a Hue/Saturation layer with a vector mask applied, and I'd like it to fade from 100% transparency to 0% transparency. How would I do this? I can't seem to work it out.
View 2 Replies
View Related
Feb 1, 2011
How to create a fish/reptile scale like texture and apply to a layer?
View 1 Replies
View Related
Jun 28, 2013
I am making selections of models off of a white background. I use the quick select tool and refine to make a clean selection. I go in and use the clone tool to remove the "halo" that is still there to make a super clean selection with no light bleed on the model. I put a black layer underneath to make sure that I got all of the remnants. I save the selection and turn it into a channel. I apply the layer mask and everything looks good. I flatten the image and put it on a white background (this is the desired form of delivery for client) Image saved and closed. When reopened, I make a selection using the channel and there is a distinct halo effect still present. I have tried making the selection and going over it a couple times with the brush at 100% and it works a little bit, but not entirely. I have already spent a lot of time going through cloning things out so it looks good, delivering the images, then they are sent back because of the halo.
View 8 Replies
View Related
Nov 18, 2011
Is there any way I can type in text, and put it in the same place in each layer without having to go to each individual layer and putting it in?
View 4 Replies
View Related
Jul 30, 2012
Is there a way to apply a Layer State to multiple DWGS, without going into each DWG?
View 3 Replies
View Related
Jan 26, 2014
is it possible to apply a specific dimension style to a layer only, without affecting the dimensions already on my drawings??
View 4 Replies
View Related
Jul 16, 2012
When I load an image either a jpeg or psd file then make a layer copy I am unable to apply a preset action to this. Either a default action or one of my own on a Mac OSX running Lion. This did not present a problem in CS5 and I am wondering if I've missed something basic?
View 10 Replies
View Related
Aug 23, 2011
I'm an infrequent and relatively unskilled GIMP user. I have used drop shadow in the past, and have been using it this afternoon with no problem until I started working on one image where I can't seem to apply the drop shadow to some text. I've got a 3-layer image, a background, a smaller image on a separate layer, and a text layer. Whenever I try to apply drop shadow to the text layer or the smaller image layer, it applies it to the background. I've tried everything I can think of...deleting and recreating the text layer, changing the "level" of the layer, closing then reopening the image...closing and restarting GIMP.. I select the text layer, click "Filter > Light and Shadow > Drop Shadow", and apply and it always applies it to the background.
View 1 Replies
View Related
Apr 26, 2009
I am new to Photoshop CS4 and presently working on a CD label project where I wish to apply a color. I use a "template" wher I have the delimitations of the CD label, but when I add a new fill layer, of course it won't detect the delimitations and will fill the entire page...
Where can I find the procedure so I can get the color gradient or solid color to be only where I want it to be (in this case, within the circular limits of the CD label).
View 5 Replies
View Related
Jul 28, 2012
I have a hatch pattern in one of my objects. I want to apply exactly the same hatch pattern to other objects but I don't remember the settings for original hatch.
There is a command in ACAD to apply properties of one object to others (brush icon in toolbar). I tries to use this command but it seams that it doesn't work for hatch.
What is easiest way to apply a hatch pattern from an object to the other one?
View 9 Replies
View Related
