Photoshop :: Duplicating A Layer/folder Adds The Layer
Feb 10, 2009
Every time you duplicate a folder or a layer, it adds the word "Copy" at the end. Is there a way to get rid of this?
I've been looking for a solution to this for the past 2 years. I spend 8 hours a day in Photoshop creating Comps. I'm crazy about having my layers clean, therefore I use a lot of folders, etc.
I probably waste an hour a day removing the $%)?#* Copy word at the end of layers/folders. This is driving me CRAZY while losing a lot of precious time.
View 4 Replies
ADVERTISEMENT
Jul 15, 2012
In order to make a copy of a layer. I know I make a copy of the layer, but then I'm having issues taking the layer, and reversing it horizontally so that I can create a new layer using the previous copied layer. I don't know what I'm doing wrong, and I've been experimenting with it. I'm now able to create really nice and curvy looking hills, but still just not able to copy it, and reverse it.
View 2 Replies
View Related
Nov 10, 2012
I can do one or another, but both at the same time? It is annoying because a mask selection turns into layer selection when you select a second layer/folder.
View 2 Replies
View Related
Aug 8, 2013
Is there any way to say to PS so it will duplicate X layer to "document -1"? When I record and duplicate it saves it at strictly to Y document not to "document" -1 or +1 or +x.
View 7 Replies
View Related
Aug 7, 2013
Unless PS has been updated to make this a feature, i may have found a bug. Now (in CS6 vs. previous versions) when you duplicate a shape layer, if you had previously selected specific points of the shape (for example with the direct selection tool) only those points will be duplicated in the new layer. This is true no matter what tool you are currently using.
What I did was make a rounded-corner rectangle shape -> then direct selected all points on one side to stretch the rectangle without distorting the rounded corners -> then switched to the move tool so no points were selected anymore and only the layer was selected-> duplicate layer (with the intention of duplicating the whole shape). what i got was just the rounded corners on a new layer.
It seems the only way to duplicate the shape layer in its entirety is to go back with the direct select tool -> select ALL points of the whole shape -> change to move tool -> dupe layer.
If that's the intended new functionality, it's a bummer because if you intend to only duplicate certain points, you can already do that while using the direct select tool. Using the move tool, it shows no direct selections and therefore you should be able to duplicate the whole layer.
Maybe I have some weird default option checked that I'm not familiar with? This is not how any previous versions of PS worked and will add friction to my workflow if this is new.
View 5 Replies
View Related
Nov 6, 2013
It's duplicating the layer style along with the layer which is fine but now when I change the style on one layer it changes all of those other layers as well. Is there a way to turn this off? I even tried removing the style and adding it new and it still changes the original!
View 1 Replies
View Related
Dec 22, 2012
Using Elements 11 I am trying to duplicate a layer on a psd file, however none of the options are available (they are all greyed out). Why is this?
View 2 Replies
View Related
Mar 1, 2013
I have a sample 3d eCover and I want to fit an image over the front part. However, I'm having a hard time transformating my image to perfectly the front layer. Is there any option to apply the same transformation of my front cover layer to my image?
Additional info:
1. The front cover layer of the 3D eCover is not yet merged with the other layers. So, I can still edit it.
2. I'm using Adobe Photoshop CS6.
View 3 Replies
View Related
Nov 20, 2012
Been a while since I've been here. Life interfered
I've just upgraded to Xara P&G Version 6 from Xara Xtreme 4. ( I know, I know what took me so long right? ) Well, Xtreme was doing everything that I required and as such never felt like upgrading but have finally done so. Still getting the hang of the new functions and facilities.
One thing that is bothering me is the new Layers task. In the older version, any imports or changes I made were always done on the active layer. In the new version something strange seems to be happening. Every time I import a new object, Xara automatically adds a new dedicated layer for the object. This means that I am ending up with tons of layers
Am I doing something wrong? Or can I change any setting so that Xara does not automatically add a new layer. I much prefer the facility of the old version where it was up to the user to add new layers as required.
View 3 Replies
View Related
Jun 30, 2012
I want to create a plug-in that will improve detail in under- and over-exposed areas of photos, but I can't get as far as duplicating a layer. I'm new to GIMP plug-ins. My plug-in below is intended to create a copy of the image's layer and add the layer to the image.
The plug-in will register in Windows 7 (GIMP 2.8) but won't register in Ubuntu 12.04 (GIMP 2.6.12). In Windows, the plug-in gives an error. I don't get an error if I comment out line 8: Code:
View 2 Replies
View Related
Aug 1, 2012
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies
View Related
Oct 24, 2012
got background image in layers panel. How to get new image from folder to layer 1.
View 2 Replies
View Related
Jun 19, 2012
Recently upgraded from CS2 --> CS5 in windows. This issue started with that upgrade. Been using PS for years.In my large PSD files I use folders to logically-group layers. With CS5, when I put layers into a folder, it automatically groups the layers (not links, groups). When trying to move the contents on ONE LAYER in a folder (using the mouse).... it moves ALL the layers in the folder.
If I use the keyboard ARROW keys, I can move the contents of one layer in a folder independently of the other layers in the folder.I have not explicitly asked PS to group or link ANYTHING in my file. The default seems to be to GROUP layers in a folder. It did not used to be this way.
If I UNGROUP the layers in the folder, it deletes the folder and the layers are now all at the root level. I lose my organization.The only way to get around this is either:
(1) leave the folder grouped and use the keyboard arrow keys to move the contents on one layer (way too cumber some), or
(2) MOVE the layer out of the folder, move the contents of it, then move the layer back into the folder.
View 3 Replies
View Related
Jun 5, 2013
In CS6, when I apply folder effects in a file on my laptop and then transfer them to my tower (computer that is, I am not a prince and do not have an actual castle with a tower) then all of the effects I have applied to a folder do NOT show up when I open the document.
The folder effects DO save on each computer, example: if I save a file and open it up the next day on the same computer it opens and displays as expected.
If I transfer the file either from my tower to my laptop or laptop to my tower the effects are completely erases from a folder (not from a layer)
I am using a USB flash drive to transfer the files. You can imagine how frustrating it is to open a file and have to go through your folders to apply all of the correct effects again.
View 3 Replies
View Related
Jun 20, 2012
CS6, Win7x64Pro?
View 3 Replies
View Related
Jan 7, 2013
I need to create a new white layer above a group folder which have an object but instead I am getting a blank layer when I filled the blank layer with white the object below disappear is there a way I can create a white layer without the object below disappeared?
View 2 Replies
View Related
Jun 7, 2012
I have found that when I use the Layer Styles on one layer and then make a new layer or select a shape that creates a new layer that when I go to add Styles to the new layer/new shape the previous layer is affected by how I set the Bevel & Emboss, Direction, Altitude, Drop Shadow etc etc.
For instance, let's say I have a ...
BG > New Layer > draw an ellipse and then add a Bevel with an > Angle of 89 and an Altitude of 30 and then I add a New Layer > open the Styles and go to change the Angle to say +89 or whatever and the Altitude to say 45 ... the first Layer/Shape Effects change.
How I can keep one Layer from being affected by an other Layers Effects'?
I have found that if I Rasterize a Layer Effect that I can add a "double" effect on the same layer but I haven't tried the to do this with separate layers. However, for most of the work I am doing I cannot use the Raster because everything needs to be true vectors.
I have a Dell Laptop/Windows 7 Home Premium that's a 64 bit
View 2 Replies
View Related
May 1, 2013
It looks like a thumbnail in center of layer with the box thing around it...And the paper I'm placing on is 12x12 or 3600x3600px.
View 2 Replies
View Related
Mar 18, 2013
I'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
Layer 1: a layer style and a filter effect, stacked
looks very different from....
Layer 2: a layer style
Layer 1: a filter effect
View 4 Replies
View Related
Feb 13, 2007
Upon trying to open a line sheet i'm working on, photoshop tells me:
Problems were encountered reading layers
"..."
"..."
"..."
Because the layer is not a valid layer. Some layers will use existing pixel data.
View 5 Replies
View Related
Apr 4, 2013
I have two maps of same area (different years) and I want to match them up as one map. I can load them both as layers and make the older map transparent so that I can see through to newer map, but older map is larger than the newer map (in the background). I can move the transparent map but I cannot make just the transparent map smaller to fit over the other map. I will also need to rotate the map slightly. When I try to resize it changes both maps. I have tried the transform and the move tool. So how can I make one layer smaller and rotate it it leaving the other layer intact?
View 2 Replies
View Related
Sep 24, 2012
Is it possible to lock a layer within a document and password protect that specific layer?
View 3 Replies
View Related
Jan 10, 2013
I made a wax seal on Photoshop with a lot of embossment, bedevilment and a Smart Filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize it (Ctr + T) It pops up a message that reads:
______________________________________________
Adobe Photoshop CS6 Extended
"Smart Filters applied to layers contained in this group will be turned off temporarily while the transform is being previewed. They will be applied after committing the transform."
OK
[] Don't show again
______________________________________________
I click OK and I re-size the layer with free transform, and then hit enter. The Layer is resized but my Smart Filter which creates a wavy affect around the seal is totally distorted.
How do re-size my layer with smart filter without affecting the smart filter aspect of the layer.
View 7 Replies
View Related
Mar 1, 2012
What I want to do is to have an adjustment layer that is a reversed, black and white image. I initially thought to merge B&W and reverse adjustment layers, but read that an adjustment layer may not be the target of a merge. Is the way to accomplish this to fiddle with the B&W adjustment layer sliders somehow?
I like how the black and white displayed image of a given color channel looks, how can I export that channel into a layer?
View 2 Replies
View Related
Dec 20, 2004
"could not complete your request because layer is not a vaild text layer" ?
View 1 Replies
View Related
Aug 23, 2006
i double click my layer (its a text) and it just select the text and the window doesnt appear what do i have to do
View 2 Replies
View Related
Nov 21, 2013
the key functionality lost is the ability to use the previous layer mask for a new layer
View 1 Replies
View Related
Aug 5, 2013
I have a large psd. The bottom most Layer can be a background layer is it possible to flatten just this layer to make is a background layer as this may make the file size smaller. Im working in PH5 on a Mac.
View 2 Replies
View Related
Jun 12, 2013
I use a lot of adjustment layers and they're often applied to the previous layer. Is there a keyboard shortcut to automatically "Use pervious layer as clipping mask" without going through the dialogue box or manually applying in the layers palette(Option-click between layers)?
View 5 Replies
View Related
Sep 14, 2012
A link or a brief explanation of"when & why" and "how to use" a master layer when working with a multi - layered image (psd or psb) file in CS6.
I've seen a couple of tutorials that make use of a "master layer" but I don't understand the "when & why.
View 11 Replies
View Related
Jul 19, 2012
I'm trying to copy a portion of a graphic and put it on another layer while keeping it's exact location as to how I view it am I understanded?
View 3 Replies
View Related
