if there is an automatic (or near automatic) method of deskewing an image on both the X and Y axis. My image is sheared off on some angles, since it is a scanned image. I like the Ruler Tool method of rotation (i.e. drawing a line on the 'straight' axis, and going to Rotate>Arbitrary), so something like that, except being able to draw both an X and Y straight axis would be ideal. I have tried Crop and Straighten,
View 17 RepliesIs there a way to have multiple vertices selected at multiple positions (heights) in the z axis and enter a value of 0 and have all of them jump to 0 in the z axis? Seems like a no brainer to me, but can find a way to do it.
View 9 Replies View RelatedIs it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
I have a floorplan of a building and am labeling exits of the building for evacuation routes. Each exit label is on its own layer. I need to show the floor plan from different perspectives/orientations and therefore need to rotate the exit labels in place on their own individual axis. So far I have been going in and selecting the image (label) on each layer and rotating it 90 degrees and then repeating the process for the next label. When I group the layers they all rotate on one axis and therefore are not near the exit they are supposed to be near. Is there an easier (quicker) way to rotate the labels as I have to do this for four different perspective for each of four floor plans?
View 9 Replies View RelatedIs there a way to align multiple objects along the same axis as the further most object? As an example, to have the right side of three boxes line up with the right side of the box furthest to the right.
View 9 Replies View RelatedI have several pillars that I want to scale down to the same size, but I don't want to have to scale them individually or reposition them once I'm done. Is there any way to scale them all without making them move along the axis being scaled? (I should have made them instances of each other. My only problem there is that I couldn't reposition one pillar without moving the others. for future reference, is there a way to temporarily break the instance relationship so on can be edited?)
View 2 Replies View RelatedI am creating a part that consists of a series of intermediate Lofts. The various Loft termination profiles are sketched on a series of stacked planes, most of which are parallel to one another. I have a Work Axis (oriented at an angle off of true vertical) that penetrates all of these sketch planes, essentially forming a "central axis" for my part. Most, but not all, of my sketch planes are normal (perpendicular) to that axis.
I want to use my "central axis" as a reference point in each of my sketches, i.e., the point where the axis intersects the sketch plane. I am having a minor difficulty.
When I project my central axis into a sketch whose plane is normal (perpendicular) to the axis, Inventor displays a reference point where the axis penetrates the plane and I can dimension my sketch geometry relative to that point. Conversely, no such point is displayed when I project the axis into a sketch plane that is NOT normal to the axis.
Is this correct behavior? To have a dimension able point on my "non-normal" sketch planes, must I create explicit Work Points to mark the intersection between my Axis and such planes, and then project those points into the related sketches?
I have an image of a car. It is going from left to right horizontally. Is there a way to make the image of the car look as if it is coming right at you?
View 2 Replies View Relatedi try to make an animation. I create a cylinder and i want to rotate it by longitudinal axis. i click 'components', select the cylinder and after i click 'position' to select the axis that axis system appears in the right side of the cylinder not in the middle. If i continue whit this settings the cylinder will rotate by a circle not by his longitudinal axis. How can i move that axis sistem in the middle of the cylinder? I can drag it but can't place it exactly in the middle.
View 1 Replies View RelatedI'm rigging a shoulder pad to a biped and I'd like it to only rotate on one axis. Google hasn't been that useful, and I hope I don't need scripting for this kind of minor thing. I'm rather new to 3Ds Max Design but I'm learning fast and liking it so far!
I've attached what I want to effectively accomplish. I'm looking for a way to lock the z-axis of the object with the upper arm's z-axis.
EDIT: Reduced picture size.
Is there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies View RelatedIs there a way in gimp to rotate a 2D image (e.g. BMW%20M3%20-%202002%20-%2003.jpg) about the Y Axis? I tried GMIC but that rotates the layer in 3D. I would like to create a view of the front of the car or any any in between.
View 6 Replies View RelatedIllustrator can make graphs with lines and bars / columns, for example from the docs: [URL] .....
However, when I create a graph like this, I seem to lose the ability to manually set the value axis using "override calculated values".
To reproduce this problem: Create a graph like the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers so the lines match up neatly - have one side go up to just under 20, one up to just under 250, so there are mismatched markers and numbers of divisions on each side.Try to make the markers and numbers of divisions match up, so the side that goes up to 20 actually goes up to 25 and has the same number of divisions as the other side.Everything I've tried doesn't work:
If I select the whole graph and go to 'Graph Type', I can't set Value Axis options. In earlier versions it's greyed out, in CS6 I can access it but clicking 'Okay' does nothing.If I select the whole graph and chose one graph type, I can set the Value Axis options, but that selected graph type then applies to the whole chart,If I use the Group Selection tool to select one of the series, and open 'Graph Type' options, changing the Value Axis options has no effectIf I use the Group Selection tool to select all series that share an axis and open 'Graph Type' options, changing the Value Axis options still has no effectIf I use the Group Selection tool to select the axis ticks group itself, or the axis line and axis ticks groups themselves, or the axis labels, axis line and axis ticks, or the axis labels, axis line, axis ticks and associated data series, etc, changing the Value Axis options also has no effect
It seems like this feature is broken and it seems like the example in the manual was carefully chosen to use a rare combination of numbers where it would actually look right.
I have some issues with Raster Image lately when I wanted a scanned jpeg of 210 x 297 mm (a4 dimension) that I want to fit into a 180x220 mm rectangular box in Autocad. I have used Photoshop CS 3 to change the image size to 180x220.
However when I insert the Raster Image files, some files are automatically set to 180x220 (as expected) and others are scaled down and I have to re-scale them (reset the scale value to 1, change the x-value and the y-value is automatically changed, but on the overall it is 180x220, sometimes x is more than y or sometimes y is more than x, but within 1-3 mm)
I want to know :
1. What is the best principle or techniques of knowing/changing image dimension (mm)
2. How to be able to scale raster image in x-axis and y-axis independently of one another?
3. Remove white background to neutral background?
I have just recently got Inventor after using Max and Maya for a few months and do not understand how to create a background image (For example: an orthographic sketch on the x/y/z axis).
View 4 Replies View RelatedI want to combine multiple image to form a single one, I saw it in a magazine, it's no a panoramic photo, It's like a face created with multiple small image that can't be se if you looking close to the image, only when you look far away. And I also want to make a magiceye image, thats pictures that look like a carpet, but when you "twist" your eye a 3d image appear.
View 4 Replies View RelatedI have photoshop CS2, and would like to know if there's a way to make simple color adjustments to multiple images at the same time.
If not, is there a way to make some kind of template to apply the same adjustments to all photos individually?
try to add an image to my first image, the first one disappears and is replaced with the new one.
How can I add a new image to my existing one and keep two or three layers at the same time?
photoshop CS5
new 17" toshiba laptop (this was not a problem on my previous/old laptop)
2 gig Video Card: nVidia Gforce GT 630M/PCIe/SSE2
12 gigs of ram
First ?:
How do I get drawings I've just opened to float (rather than pin themselves to the top left of ph-shop?
Second ?:
When I open a photo.... work on it.... open a second photo....It opens and appears as a blank pallet, (as if there's no picture) but.... when I grab and move the image window with my cursor at the top border, the image appears... then when I release it placing it where I want to move it... the image disappears again. The image is visable the WHOLE time within the navigator panel.
I then have to restart CS5 in order to fix it... but then it'll happen 10 minutes later.
I have Photoshop cs6 extended addition and was told Photoshop would work for the research application I need but so far I am finding it very difficult to do what I want. Basically, I need to be able to measure multiple lines (the red ones in the screen shot) of an image precisely, and make sure that the lines I measure are documented so that they are actually visible (so not just with the ruler tool) on the screen and labeled.
See image for example. I need the lengths (converted with the 2 micrometer scale at the bottom of the image). When I use the info, it gives me the lengths, but I can't save them, or look them up at a different time. Also, when using the line tool, then doing the "record measurement" it does not give me the length of the line but insted acts like it is a thin rectangle and gives me a height (which does not seem to be the same as if I used the measurement tool and put it next to the line, which is an idea I have, but not as accurate) and a width.
I have a whole directory of images which I took with my digital camera. I want to post them on my site, however I would like to reduce their size to fit the html pages. I know how to perform this task for individual photos, but since my directory consists of many images, this task will be very time consuming.
I was wondering if there is any way to have photoshop make the same image
size reduction on all images, by running some sort of script or any other way.
If there is such a way, does photoshop also save the new smaller images?
I have a series of actions that copy a document, apply a colour profile, resize and then save as - so I can export as jpeg. These actions work individually but currently I have to enter a file name.
What I'd like to do be able to do is select an action which runs say three or four of those actions - say export at 600, 800, 1200 pixels dimension and also suffixes the file name with that number.. so IMG0001.JPG becomes IMG001_800.JPG, IMG001_1200.JPG etc etc.
i have around a hundred images, all of which need the same treatment in that the saturation needs lifting a little.
if i set up an action to do this with one of them, is it possible to do a batch type process with the rest with one click to do all, rather than opening up each one individually? if so, could someone please point me in the right direction of how to do it?
i m using photoshop 7, pc based.
I am trying to find a tutorial about making a composite image of a skier flying through the air. I shot at 9 frames per second and want to show all of them on a single frame. Can anyone point me to somewhere that would help get me started on this kinda thing?
View 1 Replies View Relatedhow would i print an image larger than one sheet of paper at 100% so i could overlap the sheets of paper or cut them out? All photoshop does for me is print out a section at 100% on one sheet of paper.
View 1 Replies View RelatedI had an jpg thats 1024x1024 and I wanted to split it into 4 seperate files of 256x256.
Is there any way to get photoshop to do this for me?
i have an image of a babys eyes and want to make a page of that same image in mono, sepia, taking out the green, blue etc. in other words, all different representations of the eyes on one image.
i ve no problems with the changes in the eyes image, but dont know how to fill a new blank image with multiple copies of the eyes.
I have a Mac OS X Lion 10.7.4 and Photoshop CS5.1 and have just hooked up my Epson RX580. On the window platform in another software program the multiple pages and/or poster options appear in the print window. But not in Photoshop on my mac. I have made sure to download the newest drivers etc.
View 7 Replies View RelatedI need to overlay a transparent image of a tablet over about 50 images from a folder - is there any automated way to do this? I can use either Photoshop or Illustrator
View 2 Replies View RelatedHow do i cut out multiple parts of an image for example if i want to isolate a tree from the background and cut out the gaps in the foliage as well as the outline.
I have been using refine edge and the quick select tool and getting great results, its creates a layer each time but i cant work out how to show all the cut outs i can only seem to see one at a time instead of all the transparent background, i assume its something to do with layers and masking perhaps.
I want to divide up a bunch of scanned in photos quickly. I have 4 or 5 photos . Aligned next to each other in each scan.
View 5 Replies View Related