I have just recently got Inventor after using Max and Maya for a few months and do not understand how to create a background image (For example: an orthographic sketch on the x/y/z axis).
View 4 RepliesI wanted to create a reference axis, which should look like the one in the following picture (B):
how I can create such an reference axis? Is there a tool for it or is it usually created manually?
My question is when you Create Reference Grid, it seems to default the text and grid to black in color (I work with a black background in C3D), so its pretty tough to see. Where do you control the color and text size of this Grid?
View 3 Replies View RelatedHow to import Inventor file 2D(.idw) to autocad 2D (model space) with dimensions, axes, sections, ... ?
Inventor 2013 & Autocad Mechanical 2013
Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
I have this assembly shown in the pic. below. I'm trying to create a point or axis in the blue corner points (to attaches something later on) but it just won't let me choose it for some reason. I know that it's possible to to do that (almost sure I already done this trivial thing in inventor.)
Any reason it's not letting me choose the sketch points/line to in order to create points or axis(s)?
Inventor 2012 Pro.
I7 workstation
I am trying to create a wheel that can be rotate about the horizontal axis. It should have a hole for axle to fit through. However, when I try to do this it will not let me select the horizontal axis to rotate about. I also tried to rotate about a center line that I created but it wouldn't do that either..
Windows 7 64-bit (Service Pack 1)
3.40 GHz Quad Core processor w/ Hyperthreading
8GB Ram
ATI Radeon HD 6450 1GB Ram
I am using projected and sketched geometry (2D sketches) in assembly space to create lines/ points that I intend to use to define planes and axes. The problem I have is that nearly all the geometry I create (lines and points in 2D sketches) is not "selectable" when I try to create planes or axes. I cannot even put a work points "on top of" my sketch points. Why are my sketches not usable in the assembly space? Since the components in my model are just two extruded rings I don't have any linear edges I can select to make this work/ define planes.
View 9 Replies View RelatedIn 5.3 I can create reference dimensions in sketch mode to my hearts content. They became very valuable as I would use them to determine placement of multiple features. Now, in IV 7, I have alot of trouble creating reference dimensions from adjacent features on the same surface. I have to change the way I'm working now and it has stumped me on a few occasions. is there a "new" feature I need to enable or is this the cost of progress?
View 9 Replies View Relatedi try to make an animation. I create a cylinder and i want to rotate it by longitudinal axis. i click 'components', select the cylinder and after i click 'position' to select the axis that axis system appears in the right side of the cylinder not in the middle. If i continue whit this settings the cylinder will rotate by a circle not by his longitudinal axis. How can i move that axis sistem in the middle of the cylinder? I can drag it but can't place it exactly in the middle.
View 1 Replies View RelatedI have assemblies that are comprised of reference parts - the assembly is a purchased part such as an air cylinder. I have them as reference only in the assembly (ie right click on the parts in the model tree->BOM Reference->Reference). I do it this way so I can adjust the air cylinder how I need it, but still only asign one part number to the whole assembly - as an example we'll say "cylinderX" is the part number, and filename is "cylinderX.iam"
The problem arises when I put cylinderX.iam into other assemblies and try and make drawings of those assemblies. Even though cylinderX.iam is not a reference part (but all it's sub components are), it shows up in an IDW just like reference parts. I am able to make it show up how I want by editing the view properties (Edit View->Model State Tab->Reference Data Line Style "as parts"), but I still cannot balloon cylinderX.iam. It shows up in the parts list, but I cannot attach a balloon to it.
Inventor 2013, 64-Bit
Dell Precision M6700
Windows 7 Pro
Intel Core i7-3820QM @ 2.70 GHz
16 GB Ram
NVIDIA Quadro K4000M
Space Navigator
I have a drawing with many connector labels and pin numbers which are typically arranged as two vertical columns. Each label and/or pin numbers are individual MTEXT objects. The original author did not space them uniformly as an array and I would like to clean it up without having to re-enter it.
How can I select the multiple MTEXT objects and force the spacing between all of them to a desired spacing (say .2") or to have them nudge to the nearest Y grid?
I keep running into a situation where I would like to be able to create an edge or a work axis at the intersection of a work plane and the surface of the part. I figured out a work around if the surface is flat, but I haven't figured out a work around for a curved surface.
How do I create work axis where work plane intersects curved surface?
Or put another way: How do I project intersection of work plane and curved surface onto the work plane in a 2D sketch?
I need to be able to draw a 2D sketch on the work plane, but get a perfectly matching projected line onto the work plane, from the curved surface, at the intersection of the curved surface and the work plane.
The attached jpg shows the intersection in question. I circled it.
I am fairly new at animation. If I want to simply create an animation of an assembly just simply rotating in 3D space which I then can import in Showcase for a presentation, how would I do this in Inventor?
View 4 Replies View RelatedHe wants me to take an image (Its just a square image) and have it start in the center of the screen, and as it scales down and moves to one of the bottom corners (I've already got that part done) the image multiplies and creates a seamless circular/oval band in 3D space. He also wants this done with another image, but for this other image (also simply a square) to create a sphere as it multiplies.
Is there an easier way to do this, or am I going to have to place, manipulate and animate each individual copy of the square image to create a solid band?
I have a problem with CIVIL 3D 2013, when I create an axis from a 3D project of curvature, the axis does not correctly following my project.
View 3 Replies View RelatedIs it possible to create a circle from two given tangents and a center-line axis? For example, can this RED circle be derived in AutoCAD?
tan_tan_centerline.PNG
I seem to be having trouble with polar tracking on. With this activated and in front view I can only create a line in up or down (Y) direction. I cannot create a line along the z axis. This happens randomly so I must be overlooking a setting somewhere.
View 9 Replies View RelatedI would like to utilise the Layout Element: Reference System to draw the grid lines and grid values on paper space viewports.
But.I am working in South Africa. The WGS Lo systems are opposite to the northern hemisphere, positive is heading south not north. To solve this, most drawing offices (including ours) just reverse the signs of X and Y values.
Now you can see why I cannot use the Layout Element Reference System templates provided with Map. I need to change sign the X and Y text values.
How do I create a Reference System Template?
These are provided with Map:
Latitude-Longitude
Military Grid Reference System
United States National Grid
Custom map coordinate system
I tried to use 'Custom map coordinate system' but it is a fixed template, it does not provide change sign as needed.
Is there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies View RelatedI am working on a horizontal directional drill with multiple survey points.
The survey points make up (what looks like an upside down dome) and they are all connected with polylines. I need to add straight vertical lines to each point. Of course I can do this manually, but I'm wondering if there's a way to automate it. I've tried Lee's point manager, but it seems the problem is there's no option for xstart, xend, and ystart, yend. I also tried created a block out of a line then importing that on the points with point manager, but I need all of the lines to end at the same position at the top. This doesnt work because as you can see the points aren't all equal from the bottom. I also cannot find a way to trim blocks. I was hoping blocks would have the same xstart and xend, etc. as a line, but they don't.
I have some issues with Raster Image lately when I wanted a scanned jpeg of 210 x 297 mm (a4 dimension) that I want to fit into a 180x220 mm rectangular box in Autocad. I have used Photoshop CS 3 to change the image size to 180x220.
However when I insert the Raster Image files, some files are automatically set to 180x220 (as expected) and others are scaled down and I have to re-scale them (reset the scale value to 1, change the x-value and the y-value is automatically changed, but on the overall it is 180x220, sometimes x is more than y or sometimes y is more than x, but within 1-3 mm)
I want to know :
1. What is the best principle or techniques of knowing/changing image dimension (mm)
2. How to be able to scale raster image in x-axis and y-axis independently of one another?
3. Remove white background to neutral background?
Using C3d 2013. I am looking for a way to place the deflection angle of the PI of an Alignment in the label of a structure part that references said alignment. But PIs aren't an option when I select Reference Text type. Common sense tells me it would be under Alignments, but none of the PI data is an option of the Contents' Text Component Editor. I couldn't find it under any of the other Reference Text types either. I can pull the station value from the referenced alignment, is there a way to get it to tell me the deflection angle at the PI it sits on? Or even the difference in the instantaneous direction just before and just after the part?
I know listing the deflection angle of a PI is possible, as I have seen it in several examples of labeling alignments. I just want to place it in the label of other objects.who can tell me how to display LT (to represent left) and RT (to represent right) when the deflection is positive or negative respectively.
Using the axis transition how would I go about creating a push, it sounds so simple but I've been screwing around for a little bit and haven't done it.
I've done a "slide in" on my incoming clip but thats just half of it. Also, I saw somewhere that you can reveal the axis nodes on a timeline axis effect, but I'll be damned it I cant remember how.
I am create the stron network. I want structure profile elevation. How to create expression in structure reference alignment profile elevation.
View 9 Replies View Relatedthe easiest way to create a vector image of a model in inventor? I also have other Autodesk tools at my disposai (Product Design Suite).
We have creating a catalogue of company parts, and they require nice clean crisp images for the brochure. They only seem to be able to create raster images.
I am trying to create a light fixture with a head that can rotate in two axis so that the light can aim up or down and left or right.
I have been unable to create a light fixture that can rotate up and down as shown in the Revit help files.
Here is a resume of my two attempts at creating this and the reasons why they failed:
Embedded family solution: The embedded family will not rotate vertically even as a face based fixture hosted on a line reference. If you rotate the line reference in the horizontal axis, the hosted embedded fixture ignores the rotation and does not follow.
Unique family solution: The light source will not move even if it is locked to a reference line, it evokes an error.
I'm still learning some of the basics in the AutoCAD Map features. Most of my work has been using a map that is connected to data. My raster image is connected to a Sid file which covers more area than I usually need to work with.
What is the best way to work with a small area at a time? I cannot seem to imageclip the connected raster image.
I have a small logo jpg that was a Windows OLE object inserted into each drawing I do. This image was saved within the file.
It now appears that with 2012 LT I have to insert an image as a reference. Is there any way around using a linked file as I want to open these drawings without worrying about whether or not I have the logo file stored in the correct place.
I have a part and I need to scale it in the Z-axis only. It is impossible for me to rework the base geometry directly.
I have made some attempts to figure out how to do this on my own but all have failed:Thicken/OffsetCopy Object + Move Bodies + Combine (wouldn’t let me create a solid with Copy Object)Rectangular Pattern + Combine (works but not the desired result. adds a constant offset to the part, not % based, humongous model size)Derived component (uniform scaling only, prefer to modify the original file for file structure reasons)
I'm trying to animate a 6-axis robot in Inventor 2012 Pro, which moves to about 10 different locations. I'm using parameters to drive the constraints to position the wrist, and I have several different positional representations with unsuppressed / modified constraints. When I try to animate between the positional reps in IV Studio, the parts just snap into place instead of interpolating between each location. Also, I have to manually enter the timing for each step, instead of just entering the max angular velocity of each joint.
Would it be easier to create the animation in dynamic simulation using a spatial joint at the wrist? I'd like for the positions to still be modifiable through the parameters.