Using the axis transition how would I go about creating a push, it sounds so simple but I've been screwing around for a little bit and haven't done it.
I've done a "slide in" on my incoming clip but thats just half of it. Also, I saw somewhere that you can reveal the axis nodes on a timeline axis effect, but I'll be damned it I cant remember how.
I Want Create a Reveal Transition in the timeline with black & white paint splatter matte! i can this in ACTION MODULE but i want in timeline!
View 2 Replies View RelatedThere is no custom transition in Smoke 2013.
I try to do so by creating an axis transition and match the contents.
It just matched the whole clip with wrong in and out point.Then I try to swap something with the transition.It said two targets of the same type is required.
Does the Swap Effects work for transitions?
It is pretty simple and smooth in Smoke 2012.
I have tried to get transitions between clips by using the transition button by the FX button on upper left of timeline box and by using the hotkey shortcut command T neither inserts a transition.... What am I doing wrong
View 5 Replies View RelatedIs there any way to put border line for wipe transition?
View 3 Replies View RelatedIs there any way to turn on motion blur in Axis on the time line like you can in Action?
I looked in setup and it doesn't seem to be there, hoping I'm just missing something and I don't have to hall this text into action and back each time it gets updated.
For example as a txt file or something like that? (out of action)
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I'm in CFX in the Modilar Keyer. I loaded a setup previously with GMASKs previously applied on a HD shot. I now need to scale the GMASK for a 4K HD shot (200%). I was told to go in the GMASK schematic (the one that looks like action) and add a parent axis to move all the masks at once. WHen I'm in GMASK schematics I don't have access to a node bin. Where do I add an AXIS to parent all my masks in there?
View 1 Replies View RelatedWhen I enter Stabilize/Track through the Axis editor I arrive at a blank viewer screen with no footage. I get tracker target boxes, but no footage to track. Stabilizer/Stabilize works fine, but the tracker does not seem to work.
View 3 Replies View RelatedI'm working with 1080i50 footage. Interlaced, upper field (F1). When I apply an Axis effect to a clip in the timeline an render that, the result is wrong.
I'm not sure what exactly it is. Either the fields are inverted or somehow 'melted' into one frame. In the Axis editor the Interlaced/Progressive switch is set to Interlaced. If I set it to Progressive the rendered result is ok.
I'm trying to make a PIP in a timeline with Axis. PIP is a easy thing so I made it of course.
But the problem is When I use multiple PIPs. There's no Global axis like in Action, so I couldn't control PIPs at once. I thought make a Gap effect with axis or Container would be work, but It didn't work as I thought.
Do I have to make a mask for PIP? Is there any way to move, rotate, scale them together easily? & Axis could have only one image? In animation view, there's a Global axis and a image axis.
I want guassian blurred text over another layer. Using a matte, how can you blur text outside of the matte instead of just blurring the inside?
View 3 Replies View RelatedIt would be nice to have the full set of blend modes available to the AXIS tool in the timeline.
Quite often the most used blend modes for quick color treatments....Overlay, Hard Light and Soft Light etc...are not available in the timeline AXIS soft effect.
Is this a limitation of the soft effect as opposed to using ACTION or say Blend&Comp nodes?
New users would probably not find where the extra layer blend modes where, and may simply think that Smoke lacks these most used blend modes.
How do I Hide or Unhide Axis or other Nodes in Action?
View 3 Replies View Related1) Is there a way to hide all axis icons in Action apart from selected ones? Even though they turn grey it's often very hard to see the selected one in big comps.
2) In HD text module how can I see the full picture? While postioning text I can't see the bottom of the picture on either the preview monitor or the broadcast monitor.
Smoke Adv 2012 Ext1
How do I set the animation graph in Axis FX to show only those parameters that have been modified ? Currently takes me a while to locate the parameters that I want to tweak.
View 5 Replies View RelatedI go to grab an axis and move it, and the cursor is offset. See the movie.cursor_offset.mov
View 1 Replies View RelatedHow to recreate the OVERLAY transfer mode on the timeline using AXIS? It seems to be available only through Action.
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I have a problem everytime i apply the axis effect on a clip in the timeline. What happens is that smoke starts loading the effect, but hangs there, and after a while a message comes up saying that due to a software error smoke must close. But the only way to close it, is only if i do force quit process through terminal. Everything else works really well though, besides this specific issue with axis effect. This by the way didn't happen with Smoke 2013 SP2, maybe a hardware compatibility issue?
here is the smoke log file from console:
Sep 09 20:33:33 : No shader unit for shader (null).
Sep 09 20:33:33 : Assertion failed: (_curUnit), function shaderUnit* shaderUnits::getCurrentUnit() const, file develop/src/libcoreGraphics/shaderMgr.C, line 378.
Sep 09 20:33:33 : Application: smoke 2013.2.53 x86_64
Sep 09 20:33:33 : Pid: 3023
Sep 09 20:33:34 : Uninitialising thread manager.
The footage that i'm using is SD PAL, in DV format (.mov) files, captured through firewire through Premiere CS6. Is it a problem of the footage? GPU? or am i missing something?
My computer specs are (i'm on a hackintosh for now...):
Smoke 2013 ext1 (Eduactional version)
Snow Leopard 10.6.8
Intel Quad Core Q9300
GPU NVIDIA 9800GT 1GB
4GB RAM
System is installed on a 500GB SATA drive , and media storage folder of smoke is placed on a 150GB Raptor disk.
i can't find the mblur setting inside axis timeline fx. Is it there somewhere ? or does it have the mblur setting ?
View 3 Replies View RelatedHow to create Matte for Green screen footage .
View 1 Replies View Relatedis there a way to create a lightstroke inside of Smoke?
I'm working on a project where I have to create a lightstroke as some kind of transition between shots (all in 3D space), and it would be nice to know if that's even possible?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I can't find the button to create Desktop Snapshot like you can in Flame Premium. Is it there or do I need to save my Desktops differently.
View 1 Replies View RelatedIs there a way to have one node which controls say the intensity of selected lights within my scene?
View 3 Replies View Relatedhow can we create freeze frame like we do in FCP. i tried with Command U but that comes with audio and when i stretch on time line it gives handles. where in FCP when i create freeze frame it is like a still frame of JPG or any other file. when i stretch it just increase the duration of the still file.
Secondly if i did chroma key in FCP and i take the freeze frame of the clip, it creates the freeze with matte(alfa or transparent). how can we create that?
I have a sequence contain couple of clips/cuts. I then create a container and save the container in the desktop. What i want to do is to make this container as a 'master' clip so every time i put it into a new sequence, it will create an instance of the master clip. This means everytime i edit the master clip (change edit /trim etc), it will reflect immediatelly in all the instances. Is it possible ? The current implementation, i can only duplicate/copy which then they become disconnected from the 'master' clip. Do i have that options ? This is handy when i want to have managed control of that container.
View 2 Replies View RelatedI would like to crate some animation in Action or CFX. (Start text or some lens flare, etc). I would like them to start in just the right time on music (on certain beat or place in music). Is it possible to see wave form of an audio clip in Action or CFX?
View 9 Replies View Relatedcan i collect multiple nodes and collapsed them into a single node (group) and export it as a single new node (custom node ) where then i can add or expose/hide any original parameter as well as creating my custom (new) parameter or button where the button will be controlled by expression (python or similar) to do custom task. It's like in Sidefx houdini and foundry Nuke (pure node based app). can i do this in smoke.
View 4 Replies View RelatedI have a bunch of shots in which I have to place layers of smoke in z-depth. I found out that there is a plugin system for Nuke called YUVSOFT which does this but the company will not release their plugins for small market jobs. The depth maps don't have to be anything special or perfect. I just don't want to have to spend days and days rotoing out a 30 or 40 layers per shot with Mocha. Will the Motion Analysis node create the vectors to assist in depth map creation?
View 3 Replies View RelatedIs there a way to create premade shapes with a GMask? A perfect circle, or a triangle, for example.
View 2 Replies View RelatedI have a new project coming up.At the beginning, everything is supposed to be in a black and white world, just the product is supposed to be colored. And everywhere, where you place the product, the surroundings become colored too (as if being washed over with color). I already started playing around, but the result is not yet satisfying.
View 5 Replies View Related