i have around a hundred images, all of which need the same treatment in that the saturation needs lifting a little.
if i set up an action to do this with one of them, is it possible to do a batch type process with the rest with one click to do all, rather than opening up each one individually? if so, could someone please point me in the right direction of how to do it?
i m using photoshop 7, pc based.
discovered the pleasures of Edit>Convert to Profile command. When I convert to a new profile (I have belatedly discovered paper profiles) from adobe RGB to Hahnelmule Photorag to be precise there is a loss of saturation I am having trouble recovering. I will avoid this problem by starting with the correct profile however I have a lot of work in the wrong profile. To keep things simple I have flattened the image.
View 12 Replies View Relatedto saturate an image to make it all tones of one colour?
In particular "saturation_olive" is very smoothe with the shadows and tones still quite prominent.
Usually we talk about the details of the image is mostly lightness or grayscale detail, but there's another image detail type-saturation detail which we can take for use in the image manipulation,the usage of saturation detail depends on our careful observation and blend mode knowledge which give us more control of the image correction.
View 2 Replies View RelatedI'd like know how can I discover a color saturation in an image? For example, I open an image in photoshop CS6 and I'd like to know what a color is more saturated for after to do a treatment with color balance. I tried to use a Color Sample Tool in Photoshop but without success.
View 1 Replies View RelatedI have been trying to convert images to appear lijke B&W pen&ink drawings. I followed some instructions found on You Tube - (1) Duplicate Layer (2) Colour Dodeg (3) Invert (4) Gussian Blur and (5) Reduce Saturation.... However, when a layer is in "Colour Dodge" and I slide the saturation to -100, it appears to contain colour. Even though the opacity of that layer is 100%, the layer below seems to show through. The only way I can get it to go B&W is by also changing the layer below to B&W (or no saturation).
View 11 Replies View Relatedwhile messing around making a banner.
So I created two images.
The first image of the star I created on a black background. It uses the artistic > plastic wrap filter and hue/saturation effects. I was able to get this image the way I wanted.
The second image for the lighting effect, I created on a transparent background because I wanted to be able to apply the image over the star and give it the effect of running through the star. I also wanted to add its own hue/saturation effect separate from the star.
I was unable to apply any hue/saturation effect to the lighting effect image. I tried adding placing this image on top of the first (the star) and adding an adjustment layer for hue/saturation, however, when I added the colorization both images took the effect. I have the effect I want for the star, I want to be able to add the same effect, yet different coloring to the lighting waves.
-------setup:
ps cs 6
win 7 64
dual monitor setup
preferences -> perfomance as follows:
use graphics processor: ticked
advanced settings:
drawing mode: advanced
everything else in advanced is also ticked
problem:if i drag an image on my secondary (image editing) monitor the images saturation/color changes while i drag it. on mouse release it goes back to normal.this doesnt happen on my primary (system etc) monitor.yes i could probably workaround making my editing monitor my primary monitor, but i don't want to, because i want it free of windows bars and similar rubbish.
I know this problem is really simple, but I just can't seem to get it to work. I should be able to left-click on a layer, hold in the shift key while left-clicking on a layer further down the list to select multiple layers. It doesn't work, I can't even get the (Alt-Left Click) command to work, allowing me to select individual layers.
Both these commands work in Image Ready and Flash just fine.
I have checked the keyboard settings, but I am not really sure what to look for - nothing seems out of the ordinary.
I am having issues with the color warper in Autodesk Smoke Prerelease 6. As soon as you change any values (ie changing the saturation to 99.9%) in the color warper the image glitches out and you see weird inverted colours and other artifacts. It is completely unusable.
The workstation I am currently using is a 12 Core Mac Pro 5,1, 16GB Ram, GTX285.
I do not have the issue with the latest version Smoke 2012.
Puppet Warp is a great tool. But sometimes I want to isolate an area and only rework that spot, while keeping everything else in place. To do this I have to go around clicking everything to pin it down. I'm wondering if there's a way to automatically pin all possible points, or click-and-drag to create pins at all intersecting points of the web.
View 1 Replies View Relatedclick on an image it wants to jump to another image.... TOO I KEEP GETTING... ORGANIZER QUIT UNEXPECTANTLY... THIS HAPPENS OVER AND OVER... I'VE SENT REPORTS ALL FOR NOTHING.
View 5 Replies View RelatedIs there any way I can erase the same exact point on multiple layers with one click of the eraser, rather than doing it on each layer individually (and having to line up that same point again)?
View 2 Replies View RelatedA couple of things that seem to be missing in LR4. In all previous versions of LR, I could select non contiguous folders (or collections or a mix of the two) by holding down the Command key (using a Mac). That doesn't work in LR4. Also, when I create virtual copies (which I also do all the time), the copies lose the name of the original. They are simply name "copy 1."
View 5 Replies View RelatedI'll restart the computer, and then photoshop and it will let me work on it for a short time, then it won't pull up an image. I had CS4 and decided to upgrade to the monthly photoshop to see if that would fix it and nope, it started again!
View 1 Replies View RelatedCan not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
View 6 Replies View RelatedWhen I right clicked on the top of the photo window (photo info header) in any other version of Photoshop I used to get a pop up menu for the following: "duplicate, image size, canvas size, file info, page setup" Right clicking the photo window header doesn't do anything in CS4. Is this a bug in my system or is there something in setting up my workspace or preferences in CS4 that I'm missing?
View 2 Replies View Relatedbeen eliminated.? Used to be you could right click on the top of the document window and bring up a menu for image size, canvas size etc.
View 13 Replies View RelatedIs there away to "one-click" export an image to a set of .png files with different resolutions? (I need this for a set of iOS app icons).
For example: Export a file MyAppIcon.psd into the following:
MyAppIcon_29x29.png
MyAppIcon_57x57.png
MyAppIcon_114x114.png
MyAppIcon_512x512.png
MyAppIcon_48x48.png
MyAppIcon_72x72.png
I almost succeeded in doing this with Photoshop Actions, but can't figure out how to make the file names include the original image file name. In other words, file NewApp.psd should export to NewApp_29x29.png, not MyAppIcon_29x29.png.
Is there also a shortcut in CS6?
View 3 Replies View RelatedIs it possible with CS4 to be able to right click on an image to initiate a particular action? Just trying to make the process faster rather than File ->Batch-> Run?
View 2 Replies View RelatedI have created a psd file with 5 layers. each layer contains a plain un filled box of various sizes. I have created some actions to toggle the visibility of the layers. The layers represent TV format shapes (16:9 4:3 title safe etc). I want to be able to double click on a jpeg and for it to open in photoshop (ok I know how to do that in windows) as the background layer with the other layers I have already created and saved to a psd file on top. Is this possible?
Also. If I have the image with the layers open can I drag an image into it that becomes the background layer?
Under Windows XP I've installed Photoshop CS2 and CS6 simultaneously, therefore two programs with the same name exist:
...Photoshop CS2photoshop.exe
...Photoshop CS6photoshop.exe
By double click I want to open a *.TIF image by Photoshop CS2 (for certain reasons). I know how to assign an execution program to a file type in Windows XP. Whatever I do – pointing to the CS2 version – the operating system reverts always to the CS6 version. The same problem for In Design and Illustrator.
i get a 1 pixel size image when I double click the zoom for 100%.Fit screen or full screen is wacky too, not fitting or filling and sometimes going way beyond.
View 1 Replies View RelatedSince installing CS6 about a month ago, when I double-click on an image and PS is closed, PS will launch but the image doesn't open. If PS is already open, double-clicking works properly. This was an upgrade install and I'm running Mac OS 10.6.8.
View 1 Replies View RelatedI have Windows XP/Pro with SP3. In File Options > File Types I have JPG set to open up in Photoshop CS4; alas, when JPG files are either in Outlook as attachments or on the desktop, nothing happens when I double click them. My workaround is to drag the file icon into CS4, and this only works from the desktop, not from Outlook.
View 2 Replies View RelatedIm using Adobe Photoshop CC. Everytime I click Liquify a black screen appears instead of the image.I'm using Dell Inspiron 5520.
View 1 Replies View RelatedI've had to reinstall CS5 after a new Windows installation. Never had a problem with it before, but now I have the issue where if I click on a tool that has sub-tools, it now expands to show them. Before, to access them, I had to click and hold for them to appear. Now with them expanding on the first click, it's interrupting my work flow.
Additional issues have arisen while I'm here, such as, when doing web work, I'll change the rectangular marquee to single pixel horizontal (e.g.), make the selection, do what I want with it, then press M to adjust another single pixel line, but it'll return to the full rectangular marquee, like it resets.
I'm running a test at the moment with Open GL disabled, to test drivers or display issues, but it's doing the same thing.
My System:
Windows 7 Ultimate 64
AMD Phenom 2 X2 550 3.1GHz
4GB RAM
AMD Radeon HD7800.
Just reinstalled Photoshop CS5 after needing to reinstall Windows 7. Now instead of being to just grab the tool I want, it produces the flyout each time and I have to re-choose what I want to use. This is rather annoying and time consuming, if I am using the same tool.
Can it be coming from Windows or just Photoshop. I did try resetting the preferences and nothing changed.
I use cs2 and when in photoshop when i left click on any of the tools for instance the pen tool it brings up the menu to select pen tool, freeform pen tool, etc.. rather than just selecting it. I am use to having to right click on the the pen tool to get that menu, i was wondering how i would change it back. Same thing happens when i left click on all the tools on the tools menu, just used the pen tool as an example.
View 5 Replies View RelatedIf I'm editing an image and I click the toolbox (or, say, the docked layers dialogue), if I hover my cursor back over the image and press and hold spacebar so I can scroll around the image, currently I have to click within the image window before it registers my keystroke.
The more intuitive behavior and what I want to be able to do is just hover my mouse cursor over a window and and keystrokes or scrolling I perform happen within that window. This currently happens if I scroll using my mouse scroll wheel, but not with keystrokes.
I'm using single window mode in Gimp 2.8, though I've also experienced this issue in non-single window mode when using Gimp 2.6.
