Usually we talk about the details of the image is mostly lightness or grayscale detail, but there's another image detail type-saturation detail which we can take for use in the image manipulation,the usage of saturation detail depends on our careful observation and blend mode knowledge which give us more control of the image correction.
View 2 Repliesdiscovered the pleasures of Edit>Convert to Profile command. When I convert to a new profile (I have belatedly discovered paper profiles) from adobe RGB to Hahnelmule Photorag to be precise there is a loss of saturation I am having trouble recovering. I will avoid this problem by starting with the correct profile however I have a lot of work in the wrong profile. To keep things simple I have flattened the image.
View 12 Replies View Relatedto saturate an image to make it all tones of one colour?
In particular "saturation_olive" is very smoothe with the shadows and tones still quite prominent.
I'd like know how can I discover a color saturation in an image? For example, I open an image in photoshop CS6 and I'd like to know what a color is more saturated for after to do a treatment with color balance. I tried to use a Color Sample Tool in Photoshop but without success.
View 1 Replies View RelatedI have been trying to convert images to appear lijke B&W pen&ink drawings. I followed some instructions found on You Tube - (1) Duplicate Layer (2) Colour Dodeg (3) Invert (4) Gussian Blur and (5) Reduce Saturation.... However, when a layer is in "Colour Dodge" and I slide the saturation to -100, it appears to contain colour. Even though the opacity of that layer is 100%, the layer below seems to show through. The only way I can get it to go B&W is by also changing the layer below to B&W (or no saturation).
View 11 Replies View Relatedi have around a hundred images, all of which need the same treatment in that the saturation needs lifting a little.
if i set up an action to do this with one of them, is it possible to do a batch type process with the rest with one click to do all, rather than opening up each one individually? if so, could someone please point me in the right direction of how to do it?
i m using photoshop 7, pc based.
while messing around making a banner.
So I created two images.
The first image of the star I created on a black background. It uses the artistic > plastic wrap filter and hue/saturation effects. I was able to get this image the way I wanted.
The second image for the lighting effect, I created on a transparent background because I wanted to be able to apply the image over the star and give it the effect of running through the star. I also wanted to add its own hue/saturation effect separate from the star.
I was unable to apply any hue/saturation effect to the lighting effect image. I tried adding placing this image on top of the first (the star) and adding an adjustment layer for hue/saturation, however, when I added the colorization both images took the effect. I have the effect I want for the star, I want to be able to add the same effect, yet different coloring to the lighting waves.
I am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.Â
View 15 Replies View Related-------setup:
ps cs 6
win 7 64
dual monitor setup
Â
preferences -> perfomance as follows:
use graphics processor: ticked
advanced settings:
drawing mode: advanced
everything else in advanced is also ticked
Â
problem:if i drag an image on my secondary (image editing) monitor the images saturation/color changes while i drag it. on mouse release it goes back to normal.this doesnt happen on my primary (system etc) monitor.yes i could probably workaround making my editing monitor my primary monitor, but i don't want to, because i want it free of windows bars and similar rubbish.
Im creating some textures for a Maya project I'm doing. The images I have right now are .psd's at 1024,1024. Im finding out now that the res might not be high enough to produce good results in maya.
So I want to double the texture file to 2048,2048. But I dont want to lose any of the current detial or have it start to wash out and/or become pixelated. Is there a,filter, tool, plugin, or anything that could atleast aid me in keeping some of the detail? Thanks for all the replies.
I am having issues with the color warper in Autodesk Smoke Prerelease 6. As soon as you change any values (ie changing the saturation to 99.9%) in the color warper the image glitches out and you see weird inverted colours and other artifacts. It is completely unusable.
The workstation I am currently using is a 12 Core Mac Pro 5,1, 16GB Ram, GTX285.
I do not have the issue with the latest version Smoke 2012.
When I wish to select a detail within an image and right click to make the selection Photoshop CC automatically selects the inverse of the image, including the entire canvas. The edges of the canvas are not always visible when working in close-up. This has resulted in some close calls when appling color or airbrushing.Â
View 18 Replies View RelatedLevel: Newbie  OS: Windows 7 64bit  IA: CS6
Â
I am having trouble shrinking this compass I made.
Â
I have the box ticked in the preferences that says to scale strokes and effects.
Â
I made the original image 420X420 the one below is 380X380
Â
The second image is 190X190. As you can see the increments become pushed together. I actually want this image to look exactly like the first picture at an icon size of roughly 64X64.
Â
Is there a way I can keep the look of this compass but make it icon size?
In lr4.1 before Importing images, I'd like to see more info (camera, lens, focal length, f-stop, exposure time etc.) about the images besides just the file name before making the selection to import.
Â
In the library module I just push the i key and it loops through two sets of info and a non-display. Why can't I do this in the Import module? If yes: how? What options do I set and where? If no: Is there a plugin to do so or who do I ask to add this to the next release?
I have designed a brochure for a friend but the Printers say there is an issue with the saturation on the black.
The saturation I have done is apparently 400% but should be under 300%.
I assume the brochures are being digitally printed as opposed to traditional methods.
My questions are:
How do I find out what the saturation of the black is ?
....and how do I change the black saturation without changing the saturartion on the rest of the colours ?
I go to use the Hue/Saturation Editor thing, Photoshop messes up on me. It goes to the eyedropper tool, the "X" in the top right corner goes faded, so that I can't click on it, but I can select colors on the picture (with the eyedropper) and on the little 2 color pallete thing in the bottom left corner, where it displays the foreground and background color. I can switch them, with the arrow, but nothing else, i can't switch layers, I can't select any other tools, or anything. Can someone help me with this? Also, this might help, I was following a tutorial that required me to change some sort of properties... a link to the tutorial is below; If you download the .PSD file, a warning box pops up on photoshop when you try and open it...
View 2 Replies View RelatedWhen I modify a jpeg and save it as Save for web and devices, the next time I open the same document, it gives an extra (15-17) saturation to it.I can't figure out why. I watched Lynda's Photoshop videos and probably we saved something there,
View 2 Replies View RelatedWhen I colorize an image in Hue / Saturation in CS6 I see it correctly as a preview, but when I click OK it reverts.
View 1 Replies View RelatedI made myself a graphic, currently it is black and white, and I would like to add colour to it. Now when I want to go to (Image > Adjustments > Hue/Saturation) it is inactive, meaning I can't click on it. Well I can click but nothing comes up of course.
View 1 Replies View RelatedI usually use FW for my styles-based graphics (menubars, text effects), but have recently begun to experiment with PS.
However, I've noticed that when applying a style to text (Baltic Sea Ice, for example), even after I rasterize the text layer, I am still unable to alter the color by changing the hue / saturation in order to match a precise color scheme. Is there another way to do this?
Import scanned JPG, trace over lines, make colour mask, then just fill in appropriate colours.
Now my next step would be to use hue/saturation to make all the shadows and shading etc, but the hue saturation option is grayed out on the menu
I have an image that I want to lighten one color. I choose "color range" and select the color and it has dotted lines around it. Then, I want to play with that color or area of the image and try different saturations or colors. BUT, when I try that, the main layer with the image is not selected. So no changes are registered..... just the layer for hue/saturation is highlighted so I can't do anything to change this color. Seems that, automatically, the NON IMAGE layer becomes the only one I can work with when I select hue/saturation...
View 1 Replies View RelatedWhen I save for web, I get a weird de-saturation in my image and I have never come across this before. This weekend I tried to save an image to be optimized, and it came out all digitized and looking like crap. So I wanted to go back and save it at the higher setting.
Now, there is no pixilation, but my colors are muted.
The bottom image is what it SHOULD look like, and the top image is what saves when I save for web.
I created this effect in photoshop cs2 awhile ago and cannot remember how I did it. Does somebody know how to create this effect?
View 7 Replies View RelatedI am after a way to highlight the most SATURATED areas of an image.
I know that 'Threshold' will highlight the darkest areas, but they may not necessary be the most saturated.
way to get a gradient effect similar to the hue/saturation effect, so if i wanted to use an eye to do this, i can have 2 different colours fading into eachother to make say a blueish green eye.
i would just kind of like a gradient colour overlay of it
i would like to apply it to this image
I have been running CS4 for about five months. There have been problems - speed, stability - but here is a new one. Out of the blue, selecting the Hue-Saturation panel eithe rthrough the menu or by keystroke brings up the eyedropper - functioning - but essentially crashes Photoshop. It goes on running - you get 'blind' menues - but it is impossible to switch the eydropper off and you consequently have to close CS4 from Windows. I have rebooted, it still happens.
View 3 Replies View RelatedWhen I adjust the hue and saturation on a image (big adjustments like + 60 on sat, + 10 on hue) and click OK the colors revert back to about 15%, or less, of what I raised them to.
1. This only happens on a particular image that I scanned in.
2. This did not happen on the first few prints of this image (didn’t save settings, etc., so I had to redo the next time - a few days later). And it doesn't happen on any of my other images (non-scans).
I've tried reloading it from the CD that I burned and starting over, but it does the same thing.
(Using Photoshop 7 and trying to print with an Epson 2200.)
For quite a while I have been using the Photoshop HDR for initial processing of my HDR shots. My workflow is to "open in HDR Pro in Photoshop" from Lightroom. With LR 3.x and CS5 there was no problem - make the initial tonemapping settings in CS5, hit "OK", and save the resultant TIF back to lightroom for further processing.
Â
With LR 4.1 I do the same thing, the files import into CS6 and the tonemapping window comes up, but after I hit OK in the tonemapping window, the resultant tonemapped TIF file is oversaturated(This still in CS6). It needs about 30 points of saturation reduction in LR to get it back to what it showed in the tonemapping window.
Â
I have colour gamut set for Pro Photo RGB in both LR and PS. I can show some screen captures later.
Id like to know if its possible to make own hue/saturaiton colour. What I mean by this is we get an option for red,yellow,greens etc etc.
But lets say we have an image over clusted with brown, and we would like to have that option to reduce the browness in an image. so Is there a way
we can make our custom colour? Like the example below this guys face has a brownish colour to it, and with the colour picker I get a #b56b3e which seems related to the brown colour family.so Id like to make that #b56b3e into a colour of my Hue / Saturation. so I have the option in the drop down menu.
I am trying to create one of those images where you desaturate all the color out of an image and leave only a few select "highlight" components in color for effect... so I go to the layer, click on the "Create new fill or adjustment layer" button at the bottom of the layers panel (next to create mask), and use the Hue/Saturation option, then desaturate the setting, then paint bucket the layer to black, and then use a white brush to wipe out the colors in the areas that I want. It seems like it does it fine, but the thing is, it doesnt desaturate 100%. This has happened in another "desaturate" process (cant remember what it was exactly). It seems to take out the color but there is still definitely some brownish or whatever hue in there.. it shows as such when I use an eyedropper to check the "new color," and when I turn the image into grayscale, it defintely is different.
Â
So why can tthe white brush desaturate the colors 100%Â There must be some other setting I am missing?