Photoshop :: Multiple Image Layering
Jan 10, 2008try to add an image to my first image, the first one disappears and is replaced with the new one.
How can I add a new image to my existing one and keep two or three layers at the same time?
ADVERTISEMENT
Photoshop :: How To Use Layering
Sep 12, 2008I am not that familiar with this version of photoshop (CS3). however I'm trying my best to see how to use it. I have a logo image for my business that I want to insert in flyers, brochures, etc. The color of my logo is a dark plum/purple. When I use it on a white background it looks ok. but when I try to insert it in something that has a colored or tinted background, you see the white square around the logo, and it looks horrible. How can I "cut" or layer just the logo image and use it without it applying the white background square?
View 14 Replies View RelatedPhotoshop :: Layering..
Nov 21, 2004going through an 850 page
What im trying to do is get it "Layer Via Copy" and get it so its a blank page with nothing but the layer i copied..which has the paw print i copied, as instructed in the book.
All the book says to do is "Go to layer via copy" and then i can add text and do all this other good stuff...It doesnt do anything but copy the layer,
If i click the Layers pallet i see the thumbnail for what im trying to get to display, but clicking it doesnt do anything..Basically its a photo and another layer..See this next photo..Theres the thumbnail for what im trying to get to, but clicking it does nothing for me. (Compare it to a donkey trying to get a carrot tied to a fishing pole..
Photoshop :: Layering
May 12, 2004i have not experience enough in the photoshop area outside of cropping and editing pics. basic layering is logical in it's process however I can't quite figure out the basic understanding of HOW it is working.
Right now I have a label that needs to be transferred to a webpage however, it has been requested that the colors be changed. (I would get a book but I am in the middle of eastern europe without a chance to get an English book for photoshop!!!)
The basics are these. I duplicate the label which is very simple- only two layers... the backdrop white and the image maroon. The back drop only needs to be black.
However, when I click onto the "eye" of the backdrop image it goes blank like it should.
I try to make another backdrop layer and get nothing exept a selection of pastel colors... What's up with that. I try to change the colors or get the color black in there.
I simply don't know how to get it to black.
Photoshop :: Layering?
Oct 7, 2005We are trying to do a cover for a yearbook using Adobe Photoshop, and we are using signatures and TRYING to layer them, but cant figre out how ....
View 6 Replies View RelatedPhotoshop :: Layering Palette
May 12, 2006I am trying to work on a collage and when I open my pictures they are not opening as individual layers in the layer palette as all my materials say they should. As I open one at a time they open as a background and that is the only layer in the palette. They are all in the photo bin but only one palette is displayed. I have gone through a couple tutorials step by step and for some reason it is not working. How do I get my pictures to open up as their own layers so I can work with them?
View 5 Replies View RelatedPhotoshop Elements :: Layering Part Of One Photo Into Another One
Feb 18, 2014Is it possible to layer part of one photo into another photo ? And, when "layering that part of the photo, is it possible to layer it into a "selected" part of the receiving photo ?
View 1 Replies View RelatedPhotoshop Elements :: Does Layering Allow Pure White Background?
Feb 4, 2013Does Elements layering allow a pure white background? I need absolutely white background for products I am selling online - does Elements do this?
View 3 Replies View RelatedAutoCad 2D :: Layering 1 / 2" Bars
Apr 25, 2013I draw a lot of custom metal products at my work, many times they require an isometric view to fully understand what needs to be fabricated. I need to show what is welded on top of what, which usually involves me drawing out a whole line, and then large amounts of trimming to show what gets layered underneath. It is annoying but not so bad until the design gets changed, and then I basically have to start over again because any changes at all cause all the lines to not match up. Is there an easier way to do this?
I have tried drawing these in 3-d, but my computer freezes up on me too much. I was thinking if there was a way to draw something so that it is solid, I can then use draw order to show which bar is to be welded where. The only way I know how to do that now, uses solid hatching, and then prints the solid area solid black, and you can't see my anything but a black grid, not showing layers at all. I'm attaching an example of what I sometimes draw,
TRASH RACK.dwg
CorelDRAW Graphics Suite 12 :: Layering Objects
Nov 8, 2012I am fairly new to CorelDRAW and I am having an issue with layering objects that I can't figure out. The problem I am having is this:
I have two line drawings, and one sits on top of the other. Normally, the object in the back is partially hidden by the one in the front. However, I have just done a drawing where the object in the back is NOT partially hidden by the one in the front, and it looks like they are both on the same layer. What happened? I am not sure if I inadvertantly changed a setting, but I can't seem to figure out how to hide that back layer. I have tried using the 'order' function, and that usually works, but for some reason it is not working this time.
AutoCAD Civil 3D :: Structure Label Layering
Feb 19, 2013I have my pipe networks data referenced into my Utility drawing and I'm trying to add labels to my structures (catch basins, manholes...). I made styles and selected C-TEXT as the layer for the label, but for some reason they're all on layer 0. The 0 layer is frozen in my viewport but the C-TEXT layer is not, and the labels aren't showing up (but when I thaw 0 they show up)! I can see them in model space and when I click on each label the properties shows it's on the C-TEXT layer...
View 2 Replies View RelatedPaint.NET :: How To Be Able To Frame Without Copy And Paste Layering
Feb 21, 2013I used to use PhotoBucket for editing but they "updated" which was a downgrade. All their previous editing abilities I was very used to using are gone. Professional looking frames included. This is not just placing a colorful line around the edge of a picture. It was making it look like there was a real frame around it. Though the option for a regular box or poster frame was there as well and you used to be able size them with a slider. Examples:
realistic frame (the one i'm most interested in getting)
poster frame
stacked several frames
fade frame at edges on picture
The first one is the one I am most in pursuit of. Maybe I should not have even shown the others they may be a distraction. I really want to be able to frame without copy and paste layering, mathing out resizing canvas, etc etc work work work, a real looking frame. Are there any pluggins for Paint.net like that? Note I've googled already and only found simple boxing in a pic plugs for Paint.net.
Paint.NET :: Editing Green Screen / Layering?
May 21, 2012When I open up the image that I want 2 use 4 my background the image fills the (working) window. Then, as instructed, I go in2 "Layer" & import the pic w/the green screen background. But when I then go 2 "Effects" & choose/use ChromaKey (again, as instructed) the background pic is now only a small square in the upper left hand corner of the window & the rest of it is white. Therefore, my pic/finished result has a background w/a little square in the upper left hand corner & the rest is white?
View 3 Replies View RelatedPaint.NET :: Merging Or Layering Picture Into QR Code?
Oct 17, 2011I have my QR Codes and wanted to imbed, merge or layer pictures behind them and still have them usable.
I was also wanting to change the colors of parts of my QR code.
I have attached a picture of my hotel and that is what i wanted to layer behind my QR Code...
AutoCAD Architecture :: Auto Layering And Dimensions In 2013
Jun 27, 2012I'm using Auto Architecture 2013 and the dimensions are always coming in on layer A-Anno-Dims; which is fine for plans. I also use dimensions for reflected ceiling plans as wells as other plan options. I want to set the dimension on the current layer, but no matter where I choose the command (ie command line, ribbon, toolbar, tool palette) it comes in on the same layer. Can I turn this option off? Is there a variable that I can chage?
View 9 Replies View RelatedAfter Effects :: Layering Tool - How To Make Opacity Is In Effect
Apr 3, 2013I am trying to make a video where one man reaches his hand through the other mans chest and I have it all lined up perfectly by changing each video's opacity to 50% but I was wondering how to make it like opacity is in effect but each one is 100% where i can see both people fully. How could I make it to where it looks like they are in the same video together just like opacity does but make them full instead of see through.
View 3 Replies View RelatedGIMP :: Blurring Images And Layering Color Over Black And White?
Sep 6, 2012I have done a little work and created these images. The blur does not look completely right to me because I just used the free select tool and would copy the coin part of the picture out and paste it back on with a different layer and line it up as well as I could. I would really like to make it look a lot better with no blurred part of the coin in the back ground. I would also like to turn the background of the image B&W and leave the coin in color.
View 1 Replies View RelatedAutoCad :: Edit Xrefs To Correspond To Base Model Space Layering
Oct 29, 2013Is it possible to edit xrefs so that the xref layers correspond to your base model space layering? In other words, when you do an xref edit in your base drawing (not separate xref file) the layering will react to your edits using base plan layering? I use on screen layer tool bars and xref layers are on a separate layer and do not respond to these toolbar.
View 1 Replies View RelatedIllustrator :: Layering Only Part Of Object And Aligning Convergence Point In Middle
Oct 12, 2012I would like to layer them in such a way that the orage circle below is put in front of the green circle. Essentially, I need to select only the part of the orange circle and bring it to the front while leaving the other part of the circle alone. Can this be done in Illustrator?
In summary, this is what I am trying to accomplish: Green over blueBlue over yellowYellow over orangeOrange over Green
Also, is there a way to use a tool inside of illustrator to arrange the locations so they are all 100% perfectly alligned and meeting in the middle without "eyeballing" it?
AutoCAD 2010 :: Custom Menu That Reflects Each Clients Colors / Symbols And Layering
Mar 31, 2012I work all across the country with different architects and engineers on a contract basis. Typically I create a custom menu that reflects each clients colors, symbols, layering ect. But now I have just upgraded to Acad 2012 and don't know how to create a custom menu in 2012 for each client. Is it even possible? What I have found is the customize button but when I modify a command for a specific client it makes the same change for all clients, as all that I was doing was modifying a workspace, and only modifying the command. What I have done in the past is to take the Acad.mns and copy it and rename it client-name-Acad.mns and make the necessary changes that the clients standards required. Can I still do something like that?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Reinserting A Standard Base Template For Layering?
Oct 28, 2012creating a lisp or pulldown with some standard features in it.
what i would like to do is be able to quickly insert a template (layers/linetypes/colours etc) which is the same used in our initial drawing. I'm a big fan of constantly purging and auditing my drawings to keep them clean and in a previous workplace we had the ability to reinsert all the default layering.
Photoshop :: Multiple Image For One Image
Jun 28, 2004I want to combine multiple image to form a single one, I saw it in a magazine, it's no a panoramic photo, It's like a face created with multiple small image that can't be se if you looking close to the image, only when you look far away. And I also want to make a magiceye image, thats pictures that look like a carpet, but when you "twist" your eye a 3d image appear.
View 4 Replies View RelatedPhotoshop :: Multiple Image Edit
Aug 13, 2007I have photoshop CS2, and would like to know if there's a way to make simple color adjustments to multiple images at the same time.
If not, is there a way to make some kind of template to apply the same adjustments to all photos individually?
Photoshop :: Image Disappears After Opening Up Multiple?
Dec 11, 2012photoshop CS5
new 17" toshiba laptop (this was not a problem on my previous/old laptop)
2 gig Video Card: nVidia Gforce GT 630M/PCIe/SSE2
12 gigs of ram
First ?:
How do I get drawings I've just opened to float (rather than pin themselves to the top left of ph-shop?
Second ?:
When I open a photo.... work on it.... open a second photo....It opens and appears as a blank pallet, (as if there's no picture) but.... when I grab and move the image window with my cursor at the top border, the image appears... then when I release it placing it where I want to move it... the image disappears again. The image is visable the WHOLE time within the navigator panel.
I then have to restart CS5 in order to fix it... but then it'll happen 10 minutes later.
Photoshop :: CS6 - Measure Multiple Lines Of Image
Apr 10, 2013I have Photoshop cs6 extended addition and was told Photoshop would work for the research application I need but so far I am finding it very difficult to do what I want. Basically, I need to be able to measure multiple lines (the red ones in the screen shot) of an image precisely, and make sure that the lines I measure are documented so that they are actually visible (so not just with the ruler tool) on the screen and labeled.
See image for example. I need the lengths (converted with the 2 micrometer scale at the bottom of the image). When I use the info, it gives me the lengths, but I can't save them, or look them up at a different time. Also, when using the line tool, then doing the "record measurement" it does not give me the length of the line but insted acts like it is a thin rectangle and gives me a height (which does not seem to be the same as if I used the measurement tool and put it next to the line, which is an idea I have, but not as accurate) and a width.
Photoshop :: Reducing Multiple Image Sizes In One Go
Oct 12, 2004I have a whole directory of images which I took with my digital camera. I want to post them on my site, however I would like to reduce their size to fit the html pages. I know how to perform this task for individual photos, but since my directory consists of many images, this task will be very time consuming.
I was wondering if there is any way to have photoshop make the same image
size reduction on all images, by running some sort of script or any other way.
If there is such a way, does photoshop also save the new smaller images?
Photoshop :: Automation - Multiple Image Saving
Nov 25, 2007I have a series of actions that copy a document, apply a colour profile, resize and then save as - so I can export as jpeg. These actions work individually but currently I have to enter a file name.
What I'd like to do be able to do is select an action which runs say three or four of those actions - say export at 600, 800, 1200 pixels dimension and also suffixes the file name with that number.. so IMG0001.JPG becomes IMG001_800.JPG, IMG001_1200.JPG etc etc.
Photoshop :: One Click Saturation With Multiple Image
Apr 4, 2005i have around a hundred images, all of which need the same treatment in that the saturation needs lifting a little.
if i set up an action to do this with one of them, is it possible to do a batch type process with the rest with one click to do all, rather than opening up each one individually? if so, could someone please point me in the right direction of how to do it?
i m using photoshop 7, pc based.
Photoshop :: Multiple Image Composite Of Skier In The Air
Nov 19, 2008I am trying to find a tutorial about making a composite image of a skier flying through the air. I shot at 9 frames per second and want to show all of them on a single frame. Can anyone point me to somewhere that would help get me started on this kinda thing?
View 1 Replies View RelatedPhotoshop :: Printing An Image On Multiple Pages
Mar 31, 2003how would i print an image larger than one sheet of paper at 100% so i could overlap the sheets of paper or cut them out? All photoshop does for me is print out a section at 100% on one sheet of paper.
View 1 Replies View RelatedPhotoshop :: Deskew Image (Multiple Axis)
Jul 25, 2009if there is an automatic (or near automatic) method of deskewing an image on both the X and Y axis. My image is sheared off on some angles, since it is a scanned image. I like the Ruler Tool method of rotation (i.e. drawing a line on the 'straight' axis, and going to Rotate>Arbitrary), so something like that, except being able to draw both an X and Y straight axis would be ideal. I have tried Crop and Straighten,
View 17 Replies View Related