Photoshop :: Layering Palette
May 12, 2006
I am trying to work on a collage and when I open my pictures they are not opening as individual layers in the layer palette as all my materials say they should. As I open one at a time they open as a background and that is the only layer in the palette. They are all in the photo bin but only one palette is displayed. I have gone through a couple tutorials step by step and for some reason it is not working. How do I get my pictures to open up as their own layers so I can work with them?
View 5 Replies
ADVERTISEMENT
Sep 12, 2008
I am not that familiar with this version of photoshop (CS3). however I'm trying my best to see how to use it. I have a logo image for my business that I want to insert in flyers, brochures, etc. The color of my logo is a dark plum/purple. When I use it on a white background it looks ok. but when I try to insert it in something that has a colored or tinted background, you see the white square around the logo, and it looks horrible. How can I "cut" or layer just the logo image and use it without it applying the white background square?
View 14 Replies
View Related
Nov 21, 2004
going through an 850 page
What im trying to do is get it "Layer Via Copy" and get it so its a blank page with nothing but the layer i copied..which has the paw print i copied, as instructed in the book.
All the book says to do is "Go to layer via copy" and then i can add text and do all this other good stuff...It doesnt do anything but copy the layer,
If i click the Layers pallet i see the thumbnail for what im trying to get to display, but clicking it doesnt do anything..Basically its a photo and another layer..See this next photo..Theres the thumbnail for what im trying to get to, but clicking it does nothing for me. (Compare it to a donkey trying to get a carrot tied to a fishing pole..
View 2 Replies
View Related
May 12, 2004
i have not experience enough in the photoshop area outside of cropping and editing pics. basic layering is logical in it's process however I can't quite figure out the basic understanding of HOW it is working.
Right now I have a label that needs to be transferred to a webpage however, it has been requested that the colors be changed. (I would get a book but I am in the middle of eastern europe without a chance to get an English book for photoshop!!!)
The basics are these. I duplicate the label which is very simple- only two layers... the backdrop white and the image maroon. The back drop only needs to be black.
However, when I click onto the "eye" of the backdrop image it goes blank like it should.
I try to make another backdrop layer and get nothing exept a selection of pastel colors... What's up with that. I try to change the colors or get the color black in there.
I simply don't know how to get it to black.
View 2 Replies
View Related
Oct 7, 2005
We are trying to do a cover for a yearbook using Adobe Photoshop, and we are using signatures and TRYING to layer them, but cant figre out how ....
View 6 Replies
View Related
Jan 10, 2008
try to add an image to my first image, the first one disappears and is replaced with the new one.
How can I add a new image to my existing one and keep two or three layers at the same time?
View 5 Replies
View Related
Feb 18, 2014
Is it possible to layer part of one photo into another photo ? And, when "layering that part of the photo, is it possible to layer it into a "selected" part of the receiving photo ?
View 1 Replies
View Related
Feb 4, 2013
Does Elements layering allow a pure white background? I need absolutely white background for products I am selling online - does Elements do this?
View 3 Replies
View Related
Apr 25, 2013
I draw a lot of custom metal products at my work, many times they require an isometric view to fully understand what needs to be fabricated. I need to show what is welded on top of what, which usually involves me drawing out a whole line, and then large amounts of trimming to show what gets layered underneath. It is annoying but not so bad until the design gets changed, and then I basically have to start over again because any changes at all cause all the lines to not match up. Is there an easier way to do this?
I have tried drawing these in 3-d, but my computer freezes up on me too much. I was thinking if there was a way to draw something so that it is solid, I can then use draw order to show which bar is to be welded where. The only way I know how to do that now, uses solid hatching, and then prints the solid area solid black, and you can't see my anything but a black grid, not showing layers at all. I'm attaching an example of what I sometimes draw,
TRASH RACK.dwg
View 9 Replies
View Related
Nov 8, 2012
I am fairly new to CorelDRAW and I am having an issue with layering objects that I can't figure out. The problem I am having is this:
I have two line drawings, and one sits on top of the other. Normally, the object in the back is partially hidden by the one in the front. However, I have just done a drawing where the object in the back is NOT partially hidden by the one in the front, and it looks like they are both on the same layer. What happened? I am not sure if I inadvertantly changed a setting, but I can't seem to figure out how to hide that back layer. I have tried using the 'order' function, and that usually works, but for some reason it is not working this time.
View 8 Replies
View Related
Feb 19, 2013
I have my pipe networks data referenced into my Utility drawing and I'm trying to add labels to my structures (catch basins, manholes...). I made styles and selected C-TEXT as the layer for the label, but for some reason they're all on layer 0. The 0 layer is frozen in my viewport but the C-TEXT layer is not, and the labels aren't showing up (but when I thaw 0 they show up)! I can see them in model space and when I click on each label the properties shows it's on the C-TEXT layer...
View 2 Replies
View Related
Feb 21, 2013
I used to use PhotoBucket for editing but they "updated" which was a downgrade. All their previous editing abilities I was very used to using are gone. Professional looking frames included. This is not just placing a colorful line around the edge of a picture. It was making it look like there was a real frame around it. Though the option for a regular box or poster frame was there as well and you used to be able size them with a slider. Examples:
realistic frame (the one i'm most interested in getting)
poster frame
stacked several frames
fade frame at edges on picture
The first one is the one I am most in pursuit of. Maybe I should not have even shown the others they may be a distraction. I really want to be able to frame without copy and paste layering, mathing out resizing canvas, etc etc work work work, a real looking frame. Are there any pluggins for Paint.net like that? Note I've googled already and only found simple boxing in a pic plugs for Paint.net.
View 11 Replies
View Related
May 21, 2012
When I open up the image that I want 2 use 4 my background the image fills the (working) window. Then, as instructed, I go in2 "Layer" & import the pic w/the green screen background. But when I then go 2 "Effects" & choose/use ChromaKey (again, as instructed) the background pic is now only a small square in the upper left hand corner of the window & the rest of it is white. Therefore, my pic/finished result has a background w/a little square in the upper left hand corner & the rest is white?
View 3 Replies
View Related
Oct 17, 2011
I have my QR Codes and wanted to imbed, merge or layer pictures behind them and still have them usable.
I was also wanting to change the colors of parts of my QR code.
I have attached a picture of my hotel and that is what i wanted to layer behind my QR Code...
View 3 Replies
View Related
Jun 27, 2012
I'm using Auto Architecture 2013 and the dimensions are always coming in on layer A-Anno-Dims; which is fine for plans. I also use dimensions for reflected ceiling plans as wells as other plan options. I want to set the dimension on the current layer, but no matter where I choose the command (ie command line, ribbon, toolbar, tool palette) it comes in on the same layer. Can I turn this option off? Is there a variable that I can chage?
View 9 Replies
View Related
Apr 3, 2013
I am trying to make a video where one man reaches his hand through the other mans chest and I have it all lined up perfectly by changing each video's opacity to 50% but I was wondering how to make it like opacity is in effect but each one is 100% where i can see both people fully. How could I make it to where it looks like they are in the same video together just like opacity does but make them full instead of see through.
View 3 Replies
View Related
Sep 6, 2012
I have done a little work and created these images. The blur does not look completely right to me because I just used the free select tool and would copy the coin part of the picture out and paste it back on with a different layer and line it up as well as I could. I would really like to make it look a lot better with no blurred part of the coin in the back ground. I would also like to turn the background of the image B&W and leave the coin in color.
View 1 Replies
View Related
Feb 2, 2012
Is it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies
View Related
Oct 29, 2013
Is it possible to edit xrefs so that the xref layers correspond to your base model space layering? In other words, when you do an xref edit in your base drawing (not separate xref file) the layering will react to your edits using base plan layering? I use on screen layer tool bars and xref layers are on a separate layer and do not respond to these toolbar.
View 1 Replies
View Related
Oct 12, 2012
I would like to layer them in such a way that the orage circle below is put in front of the green circle. Essentially, I need to select only the part of the orange circle and bring it to the front while leaving the other part of the circle alone. Can this be done in Illustrator?
In summary, this is what I am trying to accomplish: Green over blueBlue over yellowYellow over orangeOrange over Green
Also, is there a way to use a tool inside of illustrator to arrange the locations so they are all 100% perfectly alligned and meeting in the middle without "eyeballing" it?
View 6 Replies
View Related
Mar 31, 2012
I work all across the country with different architects and engineers on a contract basis. Typically I create a custom menu that reflects each clients colors, symbols, layering ect. But now I have just upgraded to Acad 2012 and don't know how to create a custom menu in 2012 for each client. Is it even possible? What I have found is the customize button but when I modify a command for a specific client it makes the same change for all clients, as all that I was doing was modifying a workspace, and only modifying the command. What I have done in the past is to take the Acad.mns and copy it and rename it client-name-Acad.mns and make the necessary changes that the clients standards required. Can I still do something like that?
View 1 Replies
View Related
Oct 28, 2012
creating a lisp or pulldown with some standard features in it.
what i would like to do is be able to quickly insert a template (layers/linetypes/colours etc) which is the same used in our initial drawing. I'm a big fan of constantly purging and auditing my drawings to keep them clean and in a previous workplace we had the ability to reinsert all the default layering.
View 2 Replies
View Related
Dec 7, 2012
I wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies
View Related
Jul 14, 2013
I am having some trouble with a file in Illustrator CS6. Within a layer, when I add a fill to an object, the fill doesn't block out the object paths beneath. For instance, say I have a square object overlapping a circle object in Layer 1. The square object is above the circle in the layer. When I add a fill to the square, the circle stroke still shows through the square even though the overlapped part should be blocked out by the fill. The square is set to normal visibility, and I have made sure that there are no duplicate paths that would account for what I am seeing. (I.e., it's not a case where there's a second identical circle path that is on top of the square, so that it remains visible in spite of the fill.)
Other details:
- I'm mainly working with a white fill, but the problem is the same with fills of any color
- When there's a fill color in the circle path as well, the circle's fill color *is* blocked out—just not its stroke.
- I have restarted Illustrator and restarted my computer and these have not changed anything.
- There are other layers within the same document where the normal layering rules work.
- I tried copy/pasting some of the problem objects into a new document, and in the new document, the fill works properly.
- If I move the problem objects to another layer, then the fill works as it should. But as I'm dealing with a number of paths, it doesn't make sense to create a layer for each to solve the problem.
I can't tell if it's a matter of working in too large or complex a file.
View 13 Replies
View Related
Jul 17, 2013
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies
View Related
Jun 26, 2007
How do you create layers from a picture that has been taking with a camera and transferred to photoshop??
I ask this because the backround I don't want, and I can't select the part I want with an elliptical tool and create a layer because the lines are really detailed.
Someone said using masks could do it, is there anyway someone could give me a few steps on how to apply that for what I need.
View 1 Replies
View Related
Mar 8, 2012
I've only ever used gimp sparingly and for simple stuff. I now need to set the palette of a 8-bit png to a specified palette, but I can't find any in gimp or online about how to load a palette. I need the palette to contain colors that may not be in the image if thats possible as these images are sprites of under 40 colors, but I need a full 256 color palette. Also is there any simple way to convert a string of numbers into a gimp palette? If not Ill probably just look at how they are saved and just write a simple script, but I thought i would ask.
View 5 Replies
View Related
Jun 4, 2013
why Photoshop CS6 can't have a simple effective palette choice like this one from Fireworks?
I'm an artist and this palette makes sense to me. The standard issue pallette in Photoshop is a mess compared to this.Is there any way to get this palette into photoshop CS6?
View 2 Replies
View Related
May 27, 2008
how I change the width of palettes in Photoshop. By unknown reasons it's not possible for me to change the width of any palettes in PS CS3 (i.e color- and layer palettes etc). Is this normal, a new version feature perhaps? :-)
For instance, my action palette has a width of two columns, and I can't change it to a single column. This seems a little bit weird to me - all the extra space my new widescreen monitor give me are now reduced by extra wide palettes in Photoshop! :-/
View 2 Replies
View Related
Jun 17, 2004
All the tools are missing from the Tool Palette.
The blue bar however, is visible.
When I click "Tab" the bar disappears.
When I click "Tab" again the blue bar reappears but no tools under it.
All tools are available in Image Ready.
View 4 Replies
View Related
Jun 1, 2009
how to use Photoshop CS3 for Macs, which had a history palate on the right side of the screen. It was way easy to undo and redo steps and it was super convenient to have. I recently downloaded Photoshop CS4 for my Windows laptop, and it doesn't have a history palate on the screen! It's been driving me crazy because I used it all the time on CS3.Does anyone know if CS4 for Windows has a history palate, and if so, how to get it onto my main screen?
View 2 Replies
View Related
