Photoshop :: Palette Width
May 27, 2008
how I change the width of palettes in Photoshop. By unknown reasons it's not possible for me to change the width of any palettes in PS CS3 (i.e color- and layer palettes etc). Is this normal, a new version feature perhaps? :-)
For instance, my action palette has a width of two columns, and I can't change it to a single column. This seems a little bit weird to me - all the extra space my new widescreen monitor give me are now reduced by extra wide palettes in Photoshop! :-/
View 2 Replies
ADVERTISEMENT
Mar 19, 2014
Can I reduce the palette width in LR 5 down to the width of LR 4? I am able to enlarge their width from the standard width – but how to reduce them? I am missing 100 pixels (2x50) for image view.
View 1 Replies
View Related
Apr 30, 2013
How do I control the width of a palette?
ps = New PaletteSet("MyPalette")
ps.Size = New System.Drawing.Size(164, 266)
ps.MinimumSize = New System.Drawing.Size(215, 150)
ps.TitleBarLocation = PaletteSetTitleBarLocation.Left
For some reason changing the Size and MinimumSize doesn't seem to have any impact.
Also..I've been basing a project on the width it allows me but on a lower resolution screen it loads cutting off the right hand segments of the controls.
View 1 Replies
View Related
Aug 13, 2012
I am unable to decrease the width of the Palette Editor window. How doI do so?
View 3 Replies
View Related
Apr 1, 2013
I'm having an issue where I'm creating a white border around two landscape oriented images that are the same exact size then doubling the width of the canvas. I've never had this issue before with PS CS6.. I tried resetting the photography workspace but no luck. I tried with two portrait oriented images and the same result. I've restarted my machine. I'm on Windows 7 Pro 64bit and I'm running PS CS6 64bit as well. Thought to do a repair through Programs and Features but there is only the option to uninstall. I haven't done anything out of the ordinary except use an action a few days ago I downloaded and used from
[URL]........
and I downloaded and used the press print action.
How I can correct this? If an image is 20 inches wide and I'm doubling it to 40 it's tripling the width to 60 inches. Is there a way I can reset every aspect of PS CS6 to get back to a factory state other than uninstalling and reinstalling?
View 5 Replies
View Related
Oct 12, 2013
whats the difference between creating a width using layers and using polyline width?
View 2 Replies
View Related
Jan 9, 2014
I'm having trouble with the spacing of my text when I import a .rtf file. The spaces change width based on the width of the columns. The problem does not effect all the paragraphs only select ones. If I change the width of the column the spacing of the text will fix itself. All of the text is the same text style. I have attached a copy for reference.
View 2 Replies
View Related
Mar 5, 2014
Trying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
View 1 Replies
View Related
May 9, 2010
I drew a cured line with the brush tool in illustrator CS5, but when I select the new "width tool" to change the width, it doesn't work.
Here are my steps:
1. Select the paintbrush tool
2. Draw something
3. Select the "width tool"
4. Try to change the width but it won't work.
Since I draw with the paintbrush tool, the "width tool" can be very handy if I can get it to work.
View 6 Replies
View Related
Nov 2, 2012
The fixed width function did not work when I wanted to draw a fixed width rectangle. Is there a new way to do this in CS6?
View 4 Replies
View Related
Feb 2, 2012
Is it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies
View Related
Dec 7, 2012
I wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies
View Related
Jul 17, 2013
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies
View Related
Mar 8, 2012
I've only ever used gimp sparingly and for simple stuff. I now need to set the palette of a 8-bit png to a specified palette, but I can't find any in gimp or online about how to load a palette. I need the palette to contain colors that may not be in the image if thats possible as these images are sprites of under 40 colors, but I need a full 256 color palette. Also is there any simple way to convert a string of numbers into a gimp palette? If not Ill probably just look at how they are saved and just write a simple script, but I thought i would ask.
View 5 Replies
View Related
Oct 10, 2002
I have a header that I made and I want it to stretch over the whole top of a browser; how do I make it so it only goes 100% on all browsers, and not more or less on others?
View 1 Replies
View Related
Oct 13, 2006
how do you measure the width of a layer/rectangle? I have tabs for links which I now want to have as the same width, but the info tool shows nothing for width or height and the rules are to high up to make use of. Apart from physically using a ruler and measuring myself, any simple way of knowing the exact width of a rectange in photoshop?
Edit: For now I'm using a line I've drawn the same width as the largest tab, then comparing it to the rest. Here's a related question:
How can I center the text within each tab?
View 3 Replies
View Related
Apr 18, 2013
my 2 year old photoshop cs4 has been always inexplicably crashing the moment I would try to use a 70 pxl brush... I learnt to work around it, but just yesterday another similar problem kicked in, when using the short keys to widen or narrow the width of the brush, the moment it hits 30 pxls photoshop crashes too. I can't work like that. I hit option-command-shift to open the program to reset, nothing. I reinstalled the whole cs4 several times, nothing. I downloaded, installed the updates for the program.
View 3 Replies
View Related
Mar 8, 2011
I can make an even gradient between two straight lines, with a fair amount of precision. as shown in the first two jpegs
How I can do this between two curvy lines so the gradient adjusts to the changing thicknesses? In the second two jpegs I'm fudging the effect with the brush tool. But this is not precise enough for what I'm trying to do.
I want to use this for traditional animation drawn frame by frame. So if I went in with the brush tool in each frame, the gradient would be stroking and freaking out when you watch the animation.
View 6 Replies
View Related
Oct 25, 2003
have a design all ready for slicing in Photoshop. How do you make it so that instead of just being a block in the middle of the page it can stretch to 100% of the window's width?
View 2 Replies
View Related
Jun 10, 2005
I want to specify a selection, is there a way to do that, or to show what pixel number you are on in Photoshop 7.0? I have an image that is 200w X 127h. I am going to be slicing this into two different images. My top image needs to be 200w X 91h and the lower 200w X 36h.
View 4 Replies
View Related
Jul 19, 2007
when I used to paint with Photoshop 7 and a mouse, I had it set up so that my brush strokes would fade gradually as I dragged the brush across the piece, like a real paintbrush running dry with each stroke.
Ever since I upgraded to Photoshop CS and a Wacom Graphire tablet, I can't figure out how to set my brush tool up like I used to have it (I prefer it for speed painting). Currently, my brush strokes vary in width based on the amount of pressure I apply. :B
how to adjust my settings so that the level of pressure on the tablet determines the stroke's transparency as well? Or at least point me to the right thread?
View 3 Replies
View Related
Nov 25, 2012
I created a pattern in Photoshop CS6 for a project with shape lines which reside on shape layers. I want to change the line weight but after I create them it seems there is no way of changing the shape; even after I select line.
I can change the spread (uniform distribution) of the lines and lengh but not their weight. No matter if I choose all or just one of the lines which are all on the same shape layer the weight does not change. This does not make sense. [URL]....
View 2 Replies
View Related
May 3, 2012
I have a brush that is square. Is it possible to change just the width or just the height and if so, how?
View 2 Replies
View Related
Jan 7, 2013
I want to use photoshop cs6 extended to measure maximum length and width of objects (like in the picture below). how to do that? Is it also possible to do it automatically?
View 15 Replies
View Related
Jun 1, 2012
Whenever I am about to change the dimension of an element, in the option bar, width and height appear in percentages.
Is there a way I can make these appear in pixels?
View 2 Replies
View Related
Oct 4, 2012
I'm having problems printing (to an Epson 3800) on 17x25 paper (the image is 16x24 @ 240dpi). The image is not printing the full width of that it should. The odd thing is that it fills a different width every time I try to print it. I have tried multiple images and the same thing happens, so I do NOT think it is something specific to the image.
I suspect it is a problem with my printer. But after spending almost 45 minutes on the phone with Epson, they claim is must be a problem with PS (I'm using CS5 [12.0.4] on Windows Vista 64-bit, SP 2 machine). Epson support had me save the image as a JPG and print it from Windows native print util (and not PS), borderless on 17x25 paper and the printer was able to print the full width of the paper..I think it could still be a problem with their printer driver (and not a problem with the print head physically not being able to move that wide).
I've printed hundreds of prints this size with this version of CS5 on this exact same machine and printer and never had a problem bef.The "native" dimensions of the image are 2336 x 3504. I have resized it to 3864 x 5796 (which is 16.1 x 24.15 inches @ 240dpi). The first time I printed it (where this problem occurred), it printed about 12 inches wide; the 2nd time about 11 inches, the 3rd time about 13 inches. Note: the image is NOT being scaled, it is printing at full size but it just being cut off.
The weird thing is that if I size it to any of the other 4 sizes I regularly print at everything is fine (5 x 7.5 on 5.67 x 8.33 paper; 8 x 12 on 8.5 x 12.5 paper, 10 x 15 on 11 x 17 paper and 12 x 18 on 13 x 19 paper).
But the experiment the Epson tech had me do shows that the print head is not "blocked". Thus, I can only think that there is either: a) CS5 is someone putting an incorrect "bounding box" in bit stream it is sending to the printer or b) there is a problem with the Epson print driver in that it is interpreting the "bounding box" of the image incorrectly (but only when sized at 3864 x 5796)..I tried Adobe's Chat support and got nowhere and the hold time for phone support is over 2 hours..
View 4 Replies
View Related
Mar 29, 2013
Why is the contact- aware scale in grey and therefore unusable?
View 1 Replies
View Related
Apr 11, 2013
Using [PS6], how can I make the line left by the pen tool heavier?
I've been pounding away with google and PS6 manual... but must be using off the wall search stings or something because I'm getting piles of info about bezier curves and using the pen tool but no mentions of making the damn line at least visible.
Even on High desktop sizes that darn line, if anywhere near any other border or line, is nearly invisible.
I'd like a line several pixels wide... but not seeing how that is done.
View 2 Replies
View Related
Aug 13, 2005
In Illustrator CS2, is there any way to set the width of a tool to grow when more pressure is applied (talking about for use with a tablet)
I know it's under PSCS2 under brushes>shape dynamics>size jitter>control=pen pressure. Is there any equivalent for Illustrator?
View 5 Replies
View Related
Jan 24, 2008
I have dozens of images to open and I need to resize them all to be 38mm wide. I don't care how tall they are, but they must be 38mm wide to fit the column widths I need them for. Is there a way to preset the size that the images open in so that they automatically open with the width resized to 38mm and the height proportionally adjusted?
View 1 Replies
View Related
Dec 7, 2008
I want to center images at higher magnifications. Just because you can put your cursor on the IMAGE and use the scroll wheel to make it go up and down doesn't mean you can make the image go right and left at the same time. Personally, I'd like to continue to use the scroll wheel to zoom in and out (done in preferences, yes) and put the cursor on either the vertical and horizontal slider bars and use the wheel to move the image up or down or right or left. But if you've ever tried to place your cursor on these narrow-*** slider bars you know it's hell to hit those things very
easily because they are barely 1/4" wide--if that.
So the question remains: How can a user increase the width
of these narrow little bars? Is there a way to do this?
Also the color of the bars is very near the same color and value as the
area surrounding it, making it difficult to see. Is it possible to alter the
color of the bars to something more visible, like say, a brighter color and/or different value
View 10 Replies
View Related
