Photoshop :: Create Image Select And Use As Stamp
Oct 25, 2013I am looking to create a 3d bubble then select it then stamp it randomly. I can create shapes but they are only black/white.
View 2 RepliesI am looking to create a 3d bubble then select it then stamp it randomly. I can create shapes but they are only black/white.
View 2 RepliesI am trying to distort/shape a photo to fit into another shape, in the shape of a shield. Its something that would be reused on other pictures.
2 things i would like to do, first is of course as above
the other, is there any way to create like a rubber stamp or a cutting tool, that once I have the shape I want created, I can use that to copy/cut/paste that image shape from other images also ?
I want to apply geographic map over another image but to look like water stamp over the image. How can I create such effect with photoshop or some plugin is aveilable.
View 9 Replies View RelatedI am trying to create a distressed, rubber stamp effect in Photoshop and am having some difficulty with the orientation of some of the text inside a text wrap. The text on top appears just how I want it, but when I try to place text on the bottom, it appears upside-down. I've tried using text-warp as well, but it obviously distorts the text and I don't want that. Is there an easy way to have the text on the bottom of text-wrapped circle orient rightside-up?
View 6 Replies View RelatedI've tried several different PS effects trying to get the same effect as here
it's similar to the "vector imaging" but i've seen it with out the colors too with a normal photo that just has the shadows shown in one color...
So far, "stamp visible" was useful to create a flattened version of the image to use in liquify, etc.
This feature suddenly stopped working.
What I get from performing the "stamp visible" shortcut (Command option shift e) is a lighter image than the original image.
I restarted Photoshop, but the bug doesn't get away: "stamp visible" no longer works.
What are my options here?
I am trying to create a rubber stamp effect over a jpg by using the following steps: URL....
When I Live Trace the below image "A" it doesn't look like the original and changes into image "B".Also, I cannot seem to extract the white from the picture after I have Live Traced it?
I used to be able to clone stamp from a different image than the one I was working on. while using clone stamp I could hover over another image on the desktop, press the alt key and click, and then continue to clone the main image.
I double check that the layer in question is selected etc. but I just get a sort of no access symbol, a circle with a diagonal line across. I can clone okay within the same image but not from a remote one as I could before.
when I try to use clone stamp tool, the entire image is dragged with my curser as I move it. I reset to defaults to no avail.
View 2 Replies View RelatedI have just purchased photoshop elements 11. It has been ok for past 10 days or so but now I have a problem when tring to clone. I select the area by alt+click but then what happens is that the whole picture moves and in fact duplicates itself
View 2 Replies View RelatedHow could I create a 'postage stamp' effect around the exterior of a rectangle -- other than typing a series of "V"'s around the perimeter?
Let not the one who says it can't be done interrupt the one who is doing it.
I am sculpting a bust and want to use Projection Stamp image to paint the diffuse map. However, the image is not showing in the viewport.
My model has 6 levels with 6+ million polygons. At none of the levels the image shows in viewport.
I'm using Nvidia GTX 560 Ti, 1G
Windows 7 Pro 64bits.
cpu i7 860, 2.8 ghz
16 GB rams.
However, when I start with the mudbox standard base head mesh, then choosing Stencil image, the image shows in the viewport. But not with my 6+ million bust and the image is On it's not hidden.
Is there anyway I can optimize Mudbox to display the image in viewport?
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedA while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View RelatedWith both tools, I can make a few changes and then both will leave a black brush spot. It works, and then it is like the program is too challenged & it just leaves a black spot. Sometimes if I move my mouse to the history panel to back up to get rid of the black spot I get a swipe of the tool all across the image when I'm reaching with the mouse to go back in history.
I'm using PSE 11 and a Macbook Pro.
I thought I used to be able to select a shape and then select a size and then just click and there is was. Now a dialog box pops up ("create custom shape")and asks for a size every time.
View 2 Replies View RelatedI just started using PS (CS6) and I added 10 new custom swatches that I want to save in a new swatch library. However, I still have the PS default library of swatches listed (that contains scores of colors). Can I select multiple swatches at once to save them for the swatch library? Or do I need to delete ALL the default swatches first manually, then save the remaining colors in the new swatch library? If so, it makes it a daunting task...
View 6 Replies View RelatedHow can I select an image that is behind another without having to move the image in-front but simply selecting the one behind?
View 6 Replies View RelatedI have an image that is just a rounded corner and I need the color changed. The image is red and the background white all on one layer. Is there a way to only select the red area? This way I can brush it with a different color.
View 2 Replies View RelatedI am new to photoshop and all i want to do is to select an image. then, i want to rotate the image. then i want to stretch the image so that its 6 inches.
View 4 Replies View RelatedI have created a comic character on an image and it has a white background.
However when I scanned it the background is not evenly white so when I try to select the background and inverse selection it does not do a clean trace of my character.
Is there a feature in PS CS6 whereby I can trace the outline of my artwork on the page by defining the edges?
when using image processor my images to select are grayed out, when they wernt yesterday?
View 3 Replies View RelatedI have a PDF file that contains an image, this image is angled at 10 degrees and is changed every week.
USING Ps CS5 & Acrobat Pro X...I open the PDF select the image markup tool, select the image to be changed, right mouse click and select 'edit image'.The image opens in PS CS5, I do the changes and save the file, the PDF updates.
USING Ps CS6 & Acrobat Pro X..I open the PDF select the image markup tool, select the image to be changed, right mouse click and select 'edit image'. The image opens in PS CS6, I do the changes and save the file, the PDF updates BUT STAIGHTENS IT, REMOVING THE 10 DEGREE ANGLE!
I went back to CS5 to test this and it works perfectly angle remains, image updates?
I am switchin over from photoshop and would like to do the following
1) Select a color: I have a logo with a green and red text and would like to select only the green text. The logo is a flat file so I do not have access to the text-layers. (In Photoshop I would now use the "select color range" tool)
2) Keep the selection of the color active (as a selection)
3) Create a new overlay-layer and fill the selection with a blue color.
How would you do this in Xara Designer?
I am making a C# Add-in, I need to create a plane from a selected face, I am using the following code, but I am getting stuck.
if (((mApp.ActiveDocument != null)))
{
if ((mApp.ActiveDocument.DocumentType == DocumentTypeEnum.kPartDocumentObject))
{
PartComponentDefinition oPartCom = mApp.ActiveDocument as PartComponentDefinition;
PartDocument oDoc = mApp.ActiveDocument as PartDocument;
[code].......
When I wish to select a detail within an image and right click to make the selection Photoshop CC automatically selects the inverse of the image, including the entire canvas. The edges of the canvas are not always visible when working in close-up. This has resulted in some close calls when appling color or airbrushing.
View 18 Replies View Relatedwhen I select, copy and paste the image it still has the content that I removed using the layer mask.
I want to paste it over another psd whilst maintaing the transparency.
PSD is at [URL]
In Adobe Camera Raw, is there a way to select the file type that you save your image in. It seems .dng or DMG are the only file types, I would like to save my original CR2 file and save a copy in JPEG for others to open.
View 8 Replies View RelatedI am not sure exactly why this is a limited feature of Inventor 2011 but when you want to select a sketch to create a boundary patch you have to select each part of the sketch in sequence. It's a pretty laborious task. I am looking to a way to automate this using i logic.
View 5 Replies View RelatedI am trying to create a very simple logo. Basically, I created two layers: one with the letter M and the other with the letter W. I now want to place another letter over top of them and then select it so I can delete the shape of the third letter from the other two and essentially be able to see the transparent background through the third letter.
I have done this in PS CS2 no problem, but I am trying to do it in illustrator so I can resize the design for anything from a business card to a billboard if needed. Bottom line is I need a solution that wont effect me being able to resize the vecotr to crazy sizes.
In the image below, the "S" is just a white letter. I need it to be a cut out through the M and W so that whatever Background it is on the page or document shows through that S space.
When I select an image with my marquee tool, It turns the screen black. Is there a fix for this?
View 4 Replies View Related