I have created a comic character on an image and it has a white background.
However when I scanned it the background is not evenly white so when I try to select the background and inverse selection it does not do a clean trace of my character.
Is there a feature in PS CS6 whereby I can trace the outline of my artwork on the page by defining the edges?
ACA 2012
For office standards sake, I've created commands in drop menus that allow every employee to use various ‘standard’ page setups: for our plotter, printer and .dwg to .pdf. It's done with a lisp routine that basically looks up a .dwg with all those page setups already created (-psetupin).
Also, I've created 2 custom .pc3 files. The first is called 'Plotter' and the second is called 'Printer'. I did this in order to simply the task of (not) modifying our customization in the event of a dying printer/plotter. These .pc3 files are on our network and every user has access to them via an office profile, with the appropriate Printer Support File Path. We all have the same printer/plotter drivers.
Problem:Everything works fine, except for 2 employees. The lisp routine loads properly, as I can see it go in the command line and the page setup actually loads as well, as its name is in the page setup drop down menu, in the Plot menu. However, the page setup isn't 'selectable'. Also, if we try to 'preview' the plot we get this message: The selected layout has an invalid media configuration.
Every option in the page setup in as wanted (printer/Plotter name, scale, plot area, plot offset, etc.), EXCEPT for the paper size (even though the paper size specified in the lisp routine is available in the paper size list).
95% of the page setups work properly. The only one that don’t work are those for our plotter on paper sizes called ‘A1 (landscape)’ & ‘A0’.
I’ve created new .pc3 files, as I wanted to be sure they weren’t corrupted. We’ve reinstalled the printer/plotter drivers. I’ve reinstalled the office profile. I’ve checked that the paper sizes specified in the lisp routine were available in the .pc3 file.
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
I just gave one of my drafters a new PC with AutoCAD 2013 and 2012 on it. We migrated the settings from her old pc with with 2012 to the new PC. All settings are correct except for the plotter. She had custom page setup that was used on all her drawings and that did not transfer. We setup a new one with the same settings but that requires us to reapply to every drawing.
Isn't there an easy way to do transfer these settings? If we choose the page setup most of the time it just goes back to none and a lot of the time it isn't even an option.
Can I transfer my photoshop to another computer without losing my work? will my pictures stay tagged and organized?
View 3 Replies View RelatedExecute a picture from Lightroom to Photoshop das not work. Picture is not opened in Photoshop.
View 1 Replies View RelatedHow to transfer the bird in image one to the backdrop in image 2? I don't have a preference to where; what ever might look good or be easiest.
View 4 Replies View RelatedI have loaded pictures from PSE 11 to my face book page but it only gives me 1 of 3 options. I load one pic it goes onto my timeline as normal or it will let me select on of 2 albums or create a new album. I have like 8 albums on my facebook how do I find or choose my designated folder with it only giving me the option for 2 the 2 I don't wish to load any more pictures to. I see it if there is not an option I'd need to save it to my windows view/folder and upload them that way.
View 1 Replies View RelatedMy move tool does not work other than selecting the entire page. It does not let me to select anything inside the page or drag and select anything inside the page.
View 1 Replies View RelatedThe problem is that if one has defined a selected area in an image, using either selection by color or contiguous selection using the 'magic wand' facility, is possible to copy this selection to the Image Map facility of the image, so as to automatically define a set of coordinates as a polygon that can be used for link purposes? Perhaps there is some interim step that is required, or perhaps a special script is required?
View 1 Replies View RelatedAll of a sudden, when I select and copy an old ad to a new page to update it, it copies without images and as plain text, all of the font selections are gone.
View 3 Replies View RelatedI want to do is add a shoulder from a portrait session. i cannot open 2 images in Photoshop at the same time, before in cs4 I could why cant i do it now. how do i transfer a layer from one image to another?
View 4 Replies View RelatedWhen I want to add page numbers, I only get a number on page One (or on whatever page I'm on) and nowhere else. I tried everything. When I go to Page Number Setting and change it to start at page 2 and want to add page numbers to all pages, nothing happens if I stand on page 1, or I get a number on whatever page I'm on. But only there. Am I supposed to do all pages one by one?
I remember using this function before, not sure which version/update but it worked. Not sure why it's not working anymore.
How can I get page numbering to work correctly?
View 5 Replies View RelatedIs there a way to select objects like selecting all rectangles filled with red colour on the current page only. The find objects is not good for current page only. it works for whole document..so, any option?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
What and where I can select/deselect to avoid saving as PDF as a single file per each page?
Currently have names like 1Page001.Layer 1.pdf etc... (the name in the Export dialog is 1.pdf)
Been working with PSE11 for a few months. Yesterday it developed a problem. I can no longer click on the layer in the main work area but have to go to the layer panel to select it. What do I need to do to change this back to where it works like it should??
View 2 Replies View RelatedI originally created an image in Illustrator and transfered it to Photoshop so i can change the hues. Now I want to take that Photoshop file and transfer it back to Illustrator but the the edges on the object are very jagged and rough whilst the object in Photoshop is smooth and the transition of gradients is smooth.
View 2 Replies View Relatedhow to transfer reduced picture image to a document
View 1 Replies View RelatedNeat Image did not transfer over fr Elements 10 to 11.
View 4 Replies View RelatedThe entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedA while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View RelatedI'm using CS5 on a PC.
I got live trace to finally trace the image I want to use. But I am unable to select the vectors now, they are stuck. The tracing is a sublayer of layer one. Is there a simple trick I'm missing?
I'm looking at tutorials on how to add strokes to text (I downloaded it today) and they say to use the color select tool. In their demonstration, when they select text, it has the normal dotted lines around it. For me, when I click it just has a thick border around it and it tells me to move my mouse to change the threshold. It won't select the text, just change the threshold when moving my mouse from left to right.
View 1 Replies View RelatedI'm new on illustrator so I'm still messing around with it.
The brushes seem to only do white lines whenever I select colours and try to draw with them! How do I make the brushes work properly?
I have the page numbering macro. It works on new files; however, it doesn't work on specific saved files. What could be wrong with those files? Is there any way to enable the page numbering macro in those files?
I use Corel Draw X3, by the way.
If I create a polysphere and make a part of the sphere invisible via isolate select, the hidden faces are still selected if I try to select faces. They are activated as if they were visible. And the invisible faces are selected if I to a click for face selection.
Windows XP, Win 7, Maya2014 SAP SP1.
I have 3 separate external HDs I use, all with the same images backed-up for safe keeping. I’ve made adjustments in Lightroom 5 to approx 200 images scattered throughout the 7000 images on 1 external HD. Is there any way I can copy and paste these changes so they are consistent on the same images on the other 2 HDs? All images are displayed in Lightroom 5.
View 14 Replies View RelatedI used Inventor 2010, but after a change of our Domain, I had some issues with export and mouse customization (one worked with IV running privileged, but the other didn't and vice versa). Reinstalation didnt solve the problem, so I hoped, that a newer version would solve it. Unfortunately the problems remained the same, but I could get it to work (running mouse software also privileged).
Now I noticed, that the 'select other' menu doesn't pop up, regardless of the delay choosen in the settings. Also some function keys don't work: F7, F8, and F9 don't show any reaction, while all other F-keys work.I'm using Inventor Professional 2013, 64 Bit (Build : 200, Release 2013 SP2 Update 2) from our Education Master Suite.
i am trying to select a dynamic block by its name but it does not work
(setq WW (ssget "x" (list (cons 2 "WET WELL"))))
Is it possible to select a center point to work from, rather than an edge? (i.e. not rectangular select)
And tell it to keep an aspect ratio?
I am trying to write a script that will automatically hatch several drawings. The drawings contain an area in which there are several objects that need to be hatched. For each drawing the objects vary in location within the one area.I figured I would set up my script to encompass the area with the object select hatch technique. This works fine if the objects in the area have no Islands. However when an object within the "object select hatch area" contains Islands it shades the whole object ignoring the Island or if it does recognize an island it will create an individual hatch for it.
However when I use the pick internal point method the hatch comes out as expected for the object with the Islands in it.