Photoshop :: Select Image / Rotate And Stretch
Jul 1, 2012I am new to photoshop and all i want to do is to select an image. then, i want to rotate the image. then i want to stretch the image so that its 6 inches.
View 4 Replies
ADVERTISEMENT
3ds Max Animation :: Stretch FK Setup Not Able To Rotate At The Elbow
Sep 19, 2013I'm trying to make a FK arm with the ability to stretch in Max 2012, but as soon as I assign an orient constraint to the elbow, the stretch ability disappears.
The file consists of two bones, two spline controllers, and an expose transform. The upper arm bone is orient and position constrained to the shoulder controller spline. The exposed transform reports the distance between the elbow spline controller and the upper arm bone. The lower arm bone, has a "Float Script" on the X Position transform and it takes the distance reported in the exposed transform to adjust its position relative to the upper arm bone.
If I select bone_elbow and assign an orient constraint, the "Float Script" on the position stops working, but the rotation works.
(I'm trying to keep the controllers out of the heirarchy of the bones because our game engine will export them and I'm trying to avoid that)
AutoCad :: Dynamic Block - Rotate / Stretch Along A Linear Path
Nov 19, 2013I am trying to have a dynamic block that will show the profile of a steel plate, detailing the angle of a bevel. Including the plate thickness, the land, gap and the actual angle of the bevel. I've gotten most of it figured out, but having a grip to SET the angle at a specific number, while maintaining the drawing's integrity is proving difficult. I have attached the block I have created so far (minus the previous attempts to rotate the beveled angle).
BVL_detail.dwg
The base point of the rotate parameter should be at the junction of the bevel & land. I need it to stay connected to the end point of the top-most flat line as it rotates, which means the lines need to stretch to match the changing angle. It will either rotate that line along with it, or if I apply a stretch tool, it gets all disconnected and just plain wrong.
One of the things I am liking about my current set up is I can grab a grip, and then type the number I need and it will pop on into place. Was hoping for the same effect if I typed in the angle, it would be exactly that, while also adjusting the drawing.
AutoCad :: Create Dynamic Block Using Stretch And Rotate Parameter
Apr 26, 2013I have a block of a circle and a line coming from the left and right side quadrant of the circle to a common point (see pic). I want to create a dynamic block using a Stretch and Rotate parameter. You select the block, the Rotate point (grip) shows at the end of the two lines. I can grab that grip and rotate both lines and circle by moving this point around the screen, but cannot Stretch this point to a new location at the same time. How can I have the Rotation end point follow the Stretch parameter?
View 2 Replies View RelatedAutoCAD 2010 :: Dynamic Block Rotate Part And Stretch Arcs To Stay Connected
Jun 18, 2012I have a block that I would like make dynamic. It is a fishhook arrow for a roundabout traffic sign. I would like to rotate the head to various angles, and have the body of the arrow adjust. I already have the ability to stretch the two end points in their direction, and rotate the head, but the curved part of the arrow body needs to adjust for the new head location. I tried dynamic stretch, but it would not attach to the rotate dimension. How do I get these arcs to stretch along their radii and associate the end arc points to the near end of arrow head?
I had one thought of using multipe arcs so that they would overlap more or less as rotated, but this is a pretty crude workaround.
LT, C3D 2005 - 2014
XP, Vista, 7
Photoshop :: Stretch Trapezoidal Image Into True Rectangular Image?
Sep 23, 2013I photographed a framed painting that, despite my best efforts, came out as a trapezoid rather than the rectangle I intended. The image has a slight taper in the sides going from top to bottom. The top of the image is 100% of the canvas width while the bottom of the image is perhaps 95% of the canvas width, so it is close to a true rectangle but not exact. What that means is that the bottom of the photo needs to be stretched by about 5%, the middle needs to be strecthed by about 2.5%, and the top is OK as is. Naturally, the amount of stretch required becomes progresively greater when going from the top to the bottom of the image. I'm new to Photoshop. Is it possible to perform such an image manipulation?
View 8 Replies View RelatedPaint.NET :: How To Select And Rotate Only Text
Aug 27, 2011How to rotate text did not work. Why would two people want to chime in with inaccurate information. The first said you go to Layers and then Rotate. All this does is rotate the entire picture not just your text. Then the other said to lasso it and right click it while you drag it either way. No such thing exists. Nothing rotates with these methods. I am not even sure there is a way to select the text?
How to rotate text? I need it for a quick logo. I have the logo saying Travel Articles and wanted the .com next to it but at a right angle. Just works well with the pic.
Photoshop :: Stretch Image
May 24, 2007i'm doing a CD layout and want to use an image that stretches across all three of the front panels for the cover. the image in question, in it's original form is: 300dpi and roughly 5.75in x 3.8in. i need the image to be able to fit a 14.5in x 5in area (i realize the photo will need to be cropped).
so, how does one make the file larger while retaining the detail of it 300dpi? i've already imported the photo into InDesign and exported it as a PDF, opened the PDF in PS at 800dpi, then resized it with the RESAMPLE IMAGE box UNCHECKED and the pic is ultra grainy.
AutoCAD LT :: Auto Select Rotate Upon Placing Dynamic Blocks
Nov 13, 2012At my last job, the CAD manager there had certain blocks which, upon insertion, automatically selected the rotate command. i.e., as soon as you click to place the block, it was free rotating.
I've search for the answer, but everything just tells me how to put the rotate command inside the dynamic block, but I don't know how to make it "auto-jump" to that immediately upon insertion.
GIMP :: Select Multiple Layers To Modify Scale / Rotate / Transform
Jul 11, 2013If one can select multiple layers to modify i.e. scale, rotate, transform... or is it only possible one layer at a time?
View 4 Replies View RelatedAutoCad :: Stretch Actions Parameter Set To Stretch Parts Including Annotative Text
Mar 15, 2012Voorstel spantenlijn.dwg
I have created a dynamic block. Herein I placed stretch actions parameter set to strecht parts including anotative text.
Now the block seems to work fine.
- When I am in modelspace and I change the annotation scale the text is changed correct
- When I am in modelspace and I change the stretch value of the dynamic block everything goes fine.
But when I am in modelspace and I change the stretch value in one of the annotiaton scales and then switch to another scale my text is changed annotativly (this is what I want) but the stretch value is set back to default (which should be at the changed value).
VideoStudio :: Image Stretch
Jun 9, 2011I made a little video commercial, where I show album covers, with intermittent quick videos of me in- between. Since I changed locations where I DJ now, I took the original video, and just tweaked it a little with the new internet address, etc. The album covers I used were all originally 300x300, and I have them all centered in the overlay screen.
The problem is, when I play the video within VSx3, everything looks fine- but as I'm encoding into a .flv file to upload on youtube, it's distorting all the perfect "squares", and "rectangulizing" them the long way.
GIMP :: Stretch Image In Non Homogeneous Way
Oct 2, 2013I am looking for a method to stretch an image in a non homogeneous way. I am starting with a rectangular image that I want to stretch horizontaly to finally obtain a trapeze in the way that the bottom pixel line does'nt change, and the top one is three times bigger. In a certain way, I want to do a perspective but without the vertical rescaling.
View 18 Replies View RelatedPremiere Pro :: Why Can't Stretch Video Image
Jan 29, 2014I want to stretch my video clip but the normal double clicking on the image and stretching it out, isnt working. I also cant use my effects and I cant seem to find the effect controls panel.
View 3 Replies View RelatedAutoCad :: Stretch JPEG Image To Different Particular Points?
Apr 19, 2012i want to stretch jpeg image to the different particular points in normal autocad, just like Autocad Map 3D having rubbersheet option for that,
View 6 Replies View RelatedGIMP :: How To Stretch / Distort Image Along A Path
Feb 1, 2013I'm using GIMP 2.8.2
I'd like to take a rectangular image (a photo) and stretch/distort it along a curved path. I've tried searching for how to do this but all I'm finding is how to curve text along a path, which, while also useful, is not what I'm trying to do.
Is there a way to do this? I'm a novice with GIMP.
AutoCad :: How To Stretch Inserted Image As OLE Object With Different Dimension Of X And Y
Nov 15, 2013How can i stretch an inserted image as ole obj with different dimension of x & y.
i tried stretching it but its width and length is the same, can't properly put it in a specified area in my working space..
Photoshop :: How To Rotate Image
Dec 10, 201210.8.2 OSX CS6 do you know the solution to this? Am trying to rotate my image.
View 4 Replies View RelatedPhotoshop :: Rotate An Image
Apr 24, 2004How do you rotate a photo, say 15 degrees, and keep the edges of the photo straight?
View 7 Replies View RelatedPhotoshop :: Rotate An Image
Aug 9, 2006I dont know if this can be done in ps or not but im trying to rotate an image not
like a circle or a clock but im trying to rotate the same way the earth spins in a horizontal axis.
Photoshop :: Want To Be Able To Rotate The Image
Feb 24, 2005I'm using the warp>flag filter and I want to be able to rotate the image once the warp is applied and it is distorting it because of the filter and it won't keep it's form.
View 1 Replies View RelatedPhotoshop :: Rotate One Component In Image
Apr 16, 2013I have an image in which I want to rotate one component some arbitrary number of degrees along a horizontal axis without changing any other part of the image. For example, if I have an image with a tobacco pipe in someone's mouth, the pipe stem is a horizontal axis.
The pipe bowl is normally vertical at the end of the stem. I want to rotate the pipe along the stem some number of degrees so that the bowl would be at 45 degrees rather than 90 degrees relative to vertical, or so that the viewer might be looking into the bowl of the pipe. Can that be done in CS6? If so, how?
Photoshop :: Cannot Nudge Rotate Image
Oct 8, 2013i can nudge with the arrow keys when moving an image but can't nudge rotate an image, the arrow keys will only move the image up and down or left to right.
View 2 Replies View RelatedPaint Shop Pro :: Masks - Automatically Stretch To Size Of Target Image?
Aug 22, 2012Do masks automatically stretch to the size of the target image?
In PSP8 I opened my target, 1615 x 1066 px:
Then, following the instructions, I opened this circular mask, 450 x 450 px:
But after completing the procedure my result looks like this, with an elliptical 'see through' area instead of a circle:
If this is by design, how would I get the circular effect I want? There are simpler ways of doing it for an all black/white mask.
AutoCAD 2010 :: Can Image Stretch From Left Or Right Or Top Or Bottom Side Instead Of Diagonal
Sep 11, 2013Wonder if can Can Image stretch from left or right or top or bottom side instead of diagonal ?
Reason is picture or tiff not correct length to the object of build.
I did scale to right length on "X" but the "Y" is off so how ?
I know that in Photoshop have stretch all side whatever I want but not in autocad 2011
Photoshop :: Opening Image In CC And Select Pixels With Any Method - Image Starts To Blink
Sep 12, 2013The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedPhotoshop :: Select And Save Parts Of Image With Different Image Quality
May 12, 2009A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View RelatedPhotoshop :: Selecting Image To Rotate And Enlarge
Jul 1, 2012i just want to select an image so that i can rotate it and enlarge it. however when i selected it using the marquee tool, and clicked image>rotate 90 cw, it rotated the entire canvas and its contents. all i wanted to do was to rotate just this image that i thought i had selected. am i doing something wrong? is the marquee tool the wrong tool to use to select an image ?
View 13 Replies View RelatedPhotoshop :: Spin Or Rotate Image - Animation GIF
Feb 21, 2013I want to rotate my image into a animation gif. I can spin it like the face of a clock but not spin it around a central X axis (like a globe spins). How can I do this?
View 7 Replies View RelatedPhotoshop :: Rotate Only Selected Portion Of Image
Oct 3, 2012If I wish to rotate ONLY an image, no problem, but if I wish to rotate (custom) only a selected portion of an image, how do I do this?
View 1 Replies View RelatedPhotoshop :: Keyboard Shortcut To Rotate Image?
Aug 27, 2008rotate image? I scan in several pictures at a time and having to click edit image rotate CW Right or CCW Left is too time consuming. I do not see a shortcut for this?
View 3 Replies View Related