i just want to select an image so that i can rotate it and enlarge it. however when i selected it using the marquee tool, and clicked image>rotate 90 cw, it rotated the entire canvas and its contents. all i wanted to do was to rotate just this image that i thought i had selected. am i doing something wrong? is the marquee tool the wrong tool to use to select an image ?
View 13 RepliesI've got a hi-res tiff image (5031x3579 px) which I need to use as a background on a very large print (2500 mm x2500 mm, 300 dpi). I placed the original image in InDesign and had to enlarge it by approx 800% to fit the canvas. Effective dpi ended up at 35dpi. This, no suprise, looks **** when viewed at 50-100%, so I thought maybe it would be better to resize the image in photoshop before placing it in InDesign. Well, I did do that and ended up with an image with a huge filesize (2,5 Gb) before saving it as a tiff again. I noticed that many of the save as options didn't come up, only tiff, Large image format and native PS. I still dont know what the final file size will be... still waiting for it to finish processing.
The method I used for enlargement was: Image size -> resample - bicubic smoother (best for enlargement) - in three steps, 200% up - 200% up - 150% up.
What is the best way using photoshop CS6? I know I will loose quality, but want to minimize the apparent loss the best way.
I'm wanting to put up some pictures in my "study" that are influencing, read it in a magazine, and I remember these. Looking on the web it seems everyone "wished they'd come up with this ad campaign".
I'd like to enlarge them to A4 size as well, just to put them in glass frames, I don't know how legal this is but I can't find anywhere that sells them on the web, or who actually made them ?
I don't really understand the enlarging process
i need to create an very large scaled pic / stencil off a a4 sized jpeg image...
though every time i blow it up it all goes pair shaped...
cleaning up the image to be even slightly more visible?
im using cs3 photoshop.
how to enlarge part of a RAW image
View 6 Replies View RelatedI was sent an image from an i pad. It is only 320x240, 40kb and 72ppi. I tried in CS6 to enlarge it but anything over the initial image size is deeply blurred using Image or canvas in Image dropdown.
Can this be resolved to enlarge to 4x6, 5x7,8x10 with in CS6?
I'm Trying to make a Headshot. Using my (Epson Perfection 1260)Scanner, I scanned a Back and White(4"x6") Sharp Image Photo at (1200 dpi) and enlarged it to(7"x 9").
Using PhotoShop I Sharpend the Image. I printed at (1440 dpi) using Glossy Photo Paper with my "Epson Stylus Photo 750" Printer. The Image has turned out Grainy and not very clear as the original although it did manage to pickup up detail like lint on the photograph LOL.
I tried enlarging the image in PS and increased the amount of Pixels, instead of during the scanning process but that resulted in poorer quality image.
The Photos that remain the same size as the original turn out excellent photo quality images.
How do I enlarge a photo from a smaller image and maintain almost the same quality as the original? It seems I am losing resolution somewhere along the way.
way to take a smallish image grabbed from the net and then popart it and make it really large ? Looking for the best way to do this, maybe Vectors?
Im looking to enlarge to about 30 inches plus to print out to largre format.
it can be done in ps.
You know when in a newspaper you get a star with a suspicious white ring round there nose, or a ingagment ring missing they have the image then a section coming off of it and enlarged.
How do I enlarge an image in elements10?
View 1 Replies View RelatedI just got CS6 and went to use the lens flare. The window is so small, I can't see where the flare is being placed. Is there any way to enlarge the image in the tiny window?
View 10 Replies View RelatedThe problem is, whenever I insert e.g. a picture or want to create a font, this is as small as a point and each time when opening Photoshop CS6. Is there a way to solve the problem so that's the image a lot more bigger directly?
View 6 Replies View RelatedPhotoshop Elements 10. I want to enlarge an image and maintain 300 dpi resolution. If I enlarge the image the resolution automatically lowers. I need to keep the res at 300. How do I accomplish this?
View 1 Replies View RelatedWhen i enlarge the size of an image (using free transform, or scale) in photoshop CS2, the resized image gets blurred (or smudged) as soon as i've accept the larger size. How can i prevent this from happening? I'm trying to work with few pixels, and when it smudges the edges i get tons of colors i don't want.
View 5 Replies View RelatedI've always worked with Photoshop (CS3). However, I just upgarded to CS Cloud and want to learn how to work with SVG images.
Apparently, I can't open SVG images with Photoshop, so I open them in Illustrator and then export them in a format I can use on the web (usually .png or .jpg). I guess I should be able to publish images in the .svg format to the web, but I don't understand how to work with them yet.
Anyway, many of the SVG images I open in Illustrator are the size of the white rectangular area in the center of the workspace. If I save them as a .png, they're often 200-300 pixels wide, when I want them to be 500-600 pixels wide. So how do I enlarge them? I've typed "enlarge" and "resize" into search but haven't found anything useful.
Of course, I can enlarge the .png's, but they often become distorted. As I understand it, SVG files don't get distorted when they're enlarged, right?
Also, what's the best way to select a certain portion of an image and enlarge it?
On a sidenote, I tried exporting one SVG image as a TIFF, and it took forever to process, eventually crashing my computer.
I go-image-resize-resample-unncheck resize all layers-set new value via % (tried 400%)-lock aspect ratio in a jpeg image.but not much happens, I want to try and double the size, where am I going wrong?
View 14 Replies View RelatedWithout blurring it?
Also, how do I enlarge it with percents (like so, if I want to enlarge an image by 200%, how would I do so?)
Problem: How to enlarge (100 times) image of multiple intersecting low resolution contour lines wile avoiding pixelation?
Simple answer: It can't be done.
Second thoughts: Well, under some circumstances it can be done... sort of. For example if lines are orthogonal to begin with then simple re-sample to nearest neighbor algorithm will do fine. If lines are simple enough, then tracing them with pen tool and recreating the original lines at higher resolution by stroking the paths with a brush will do also. Also if original lines are smooth and thick enough then some re-sampling, blurring and leveling can work (anisotropic diffusion filter may work) but will produce smoothing artifacts at corners.
From what I can see the problem boils down to creatively converting the original lines to vectors (paths / shapes) and avoiding the whole messiness of raster anti-aliasing. But here we face additional problems: Adobe trace engine is not smart enough to recognize geometric shapes, intersecting lines, straight edges, orthogonal lines and mathematical curves - just try to trace a font and you will end up with a baggy monster. Additionally, it appears that in Photoshop center-line trace is not possible and you are limited to outlines.
I am a new user of GIMP on a late 2008 MacBook Pro with Leopard (10.5.. I am trying to work with an image by applying filters however the image in the filters dialogue box is so small, it's almost unusable. How I can enlarge a portion of my pic in this box to more accurately alter it?
View 1 Replies View RelatedI have an image that is quite small, cropped from a larger image. I want to enlarge it to 317 mm wide keeping it in proportion.
Using the scaling tool I changed to mm and increased width to 317mm this leaves me with a 'window' into the top corner of the image.
I then used 'fit canvas to layers' and the canvas increases in size ok but it is empty (little grey squares) except for the top corner showing the small window into the image!
If I click on it with the resize tool I can see the whole image enlarged but as soon as i click on the 'scale' button it vanishes again and leaves the small window again?
When you download an image from shutterstock and it is in vector format, how do you enlarge the image while keeping the quality?
View 4 Replies View RelatedI use an iMac with LR3. I would like to know if it is possible to enlarge the image so as to fill the screen. I have tried Window>screen mode> full screen and pressing L to get rid of panels but there is still a large black margin around the image.
View 1 Replies View Relatedwhat is the exact thing to put to resize or enlarge the image size to make the photo larger or bigger when uploading in Facebook?
View 1 Replies View RelatedI want to enlarge an image on a digital photo and save the enlarged image as a seperate photo
View 5 Replies View Related10.8.2 OSX CS6 do you know the solution to this? Am trying to rotate my image.
View 4 Replies View RelatedHow do you rotate a photo, say 15 degrees, and keep the edges of the photo straight?
View 7 Replies View RelatedI dont know if this can be done in ps or not but im trying to rotate an image not
like a circle or a clock but im trying to rotate the same way the earth spins in a horizontal axis.
I'm using the warp>flag filter and I want to be able to rotate the image once the warp is applied and it is distorting it because of the filter and it won't keep it's form.
View 1 Replies View RelatedI've been trying to follow Dave Cross's method of making my selection on the new Background. I've tried cropping my RAW image, opening it as a Smart Image and moving it to the Destination Image. Also I tried opening it as an Image. I can't understand why I can't make a selection on that Layer in the Destination Image.
View 2 Replies View RelatedI have an image in which I want to rotate one component some arbitrary number of degrees along a horizontal axis without changing any other part of the image. For example, if I have an image with a tobacco pipe in someone's mouth, the pipe stem is a horizontal axis.
The pipe bowl is normally vertical at the end of the stem. I want to rotate the pipe along the stem some number of degrees so that the bowl would be at 45 degrees rather than 90 degrees relative to vertical, or so that the viewer might be looking into the bowl of the pipe. Can that be done in CS6? If so, how?
i can nudge with the arrow keys when moving an image but can't nudge rotate an image, the arrow keys will only move the image up and down or left to right.
View 2 Replies View Related