Photoshop :: Stretch Image
May 24, 2007
i'm doing a CD layout and want to use an image that stretches across all three of the front panels for the cover. the image in question, in it's original form is: 300dpi and roughly 5.75in x 3.8in. i need the image to be able to fit a 14.5in x 5in area (i realize the photo will need to be cropped).
so, how does one make the file larger while retaining the detail of it 300dpi? i've already imported the photo into InDesign and exported it as a PDF, opened the PDF in PS at 800dpi, then resized it with the RESAMPLE IMAGE box UNCHECKED and the pic is ultra grainy.
View 9 Replies
ADVERTISEMENT
Sep 23, 2013
I photographed a framed painting that, despite my best efforts, came out as a trapezoid rather than the rectangle I intended. The image has a slight taper in the sides going from top to bottom. The top of the image is 100% of the canvas width while the bottom of the image is perhaps 95% of the canvas width, so it is close to a true rectangle but not exact. What that means is that the bottom of the photo needs to be stretched by about 5%, the middle needs to be strecthed by about 2.5%, and the top is OK as is. Naturally, the amount of stretch required becomes progresively greater when going from the top to the bottom of the image. I'm new to Photoshop. Is it possible to perform such an image manipulation?
View 8 Replies
View Related
Jul 1, 2012
I am new to photoshop and all i want to do is to select an image. then, i want to rotate the image. then i want to stretch the image so that its 6 inches.
View 4 Replies
View Related
Mar 15, 2012
Voorstel spantenlijn.dwg
I have created a dynamic block. Herein I placed stretch actions parameter set to strecht parts including anotative text.
Now the block seems to work fine.
- When I am in modelspace and I change the annotation scale the text is changed correct
- When I am in modelspace and I change the stretch value of the dynamic block everything goes fine.
But when I am in modelspace and I change the stretch value in one of the annotiaton scales and then switch to another scale my text is changed annotativly (this is what I want) but the stretch value is set back to default (which should be at the changed value).
View 4 Replies
View Related
Jun 9, 2011
I made a little video commercial, where I show album covers, with intermittent quick videos of me in- between. Since I changed locations where I DJ now, I took the original video, and just tweaked it a little with the new internet address, etc. The album covers I used were all originally 300x300, and I have them all centered in the overlay screen.
The problem is, when I play the video within VSx3, everything looks fine- but as I'm encoding into a .flv file to upload on youtube, it's distorting all the perfect "squares", and "rectangulizing" them the long way.
View 3 Replies
View Related
Oct 2, 2013
I am looking for a method to stretch an image in a non homogeneous way. I am starting with a rectangular image that I want to stretch horizontaly to finally obtain a trapeze in the way that the bottom pixel line does'nt change, and the top one is three times bigger. In a certain way, I want to do a perspective but without the vertical rescaling.
View 18 Replies
View Related
Jan 29, 2014
I want to stretch my video clip but the normal double clicking on the image and stretching it out, isnt working. I also cant use my effects and I cant seem to find the effect controls panel.
View 3 Replies
View Related
Apr 19, 2012
i want to stretch jpeg image to the different particular points in normal autocad, just like Autocad Map 3D having rubbersheet option for that,
View 6 Replies
View Related
Feb 1, 2013
I'm using GIMP 2.8.2
I'd like to take a rectangular image (a photo) and stretch/distort it along a curved path. I've tried searching for how to do this but all I'm finding is how to curve text along a path, which, while also useful, is not what I'm trying to do.
Is there a way to do this? I'm a novice with GIMP.
View 6 Replies
View Related
Nov 15, 2013
How can i stretch an inserted image as ole obj with different dimension of x & y.
i tried stretching it but its width and length is the same, can't properly put it in a specified area in my working space..
View 5 Replies
View Related
Aug 22, 2012
Do masks automatically stretch to the size of the target image?
In PSP8 I opened my target, 1615 x 1066 px:
Then, following the instructions, I opened this circular mask, 450 x 450 px:
But after completing the procedure my result looks like this, with an elliptical 'see through' area instead of a circle:
If this is by design, how would I get the circular effect I want? There are simpler ways of doing it for an all black/white mask.
View 7 Replies
View Related
Sep 11, 2013
Wonder if can Can Image stretch from left or right or top or bottom side instead of diagonal ?
Reason is picture or tiff not correct length to the object of build.
I did scale to right length on "X" but the "Y" is off so how ?
I know that in Photoshop have stretch all side whatever I want but not in autocad 2011
View 2 Replies
View Related
Mar 28, 2012
Is it possible to drag/move a point in an image so that all imaginary lines emanating from that point remain emanating from that point? Something like what's shown in the attachment.
View 3 Replies
View Related
Oct 23, 2006
I'm having problems with some of the things on photoshop stretching the page. Today, I was trying to add a splatter effect (filter > brush stroke > splatter), and when I went to the page, the window was too big, so I couldn't see the settings on the far right. I'm not sure if it's just my computer's screen size. Here's a screenshot if you're confused.
View 4 Replies
View Related
Mar 19, 2006
I am using CS2 for creating web pages and Ive run across a little problem. I cant figure out how to "save for web" so that my *.jpg will be stretched across the web browser when people view it. When I view my *.html after "save for web" it places the *.jpg in the top left corner of the page. I can use Dreamweaver to center my image, but it still looks out of place. Ive seen photoshop created pages stretched to resize with the web browser window;
View 3 Replies
View Related
Sep 2, 2004
how to stretch text across page.
View 9 Replies
View Related
Oct 11, 2005
I have a picture that is slightly a rhombus. I would like to select the four corners using the polygon lasso tool, and would then like to paste it, but stretch the corners so it becomes a perfect square.
I have been trying this with the perspective, but am not having any luck.
I am using the Photoshop 6 for windows.
View 2 Replies
View Related
Jan 23, 2008
Anyone know how i can do a polygonal lasso pixel stretch?
i am using photoshop elements 5.0
View 9 Replies
View Related
Apr 28, 2013
As you see in the picture I have merged a window modeled in 3ds max.
How is possible to make it higher, means strech it along the Y axis from the middle and up?
If I use "scale" as you see the width of the window becomes bigger (wrong) I tried to use "mesh edit" or "stretch modifier" with no good results...
My question is how to stretch this window the way I want without changing it's width...
View 4 Replies
View Related
Oct 3, 2011
We work on a double-monitor setup!
Is there a limit for how much you can strech a toolbar.
I keep all my toolbars on a dedicated screen, from the bottom of the screen to the top but they stop streching at about 1035pixels.
The screen has 1680px vertical. As you can see on the SCREEN-SHOT bellow there is a loot of space to strech them but they wont go beyond those 1035px.
View 3 Replies
View Related
Feb 9, 2014
Imagine you have a a box, say 1 foot square. You attach a fat rubber band in the center of one side and then you pull the rubber band up to an edge and around it to the center of the next face. It stretches and the corner is the only spot that controls the change of direction. If you raise one end (the segment from your finger to the corner) it raises, but the segment from the corner to where the other end is attached stays flat on the box until you move your hand far enough away so that there is now no wrap around the edge. Now if you pull and relax, it acts like any normal rubber band. But then if you lower your fingers with the end you are holding and go back down to the face, you wrap around that corner again and can pull and relax around the corner.
What I'm actually doing is animating a muscle that goes around a bone when it's stretched out. But when it's contracted, one end moves out away from that bone it's wrapped around and it's now just a straight line. I need to animate that muscle from that contracted and straight position to the extended position but have the end of the muscle bend around the bone when it hits it.
View 2 Replies
View Related
Apr 22, 2011
I have been trying to understand why does TurboSmooth or MeshSmooth modifier tend to stretch the UVs of the low poly unwrapped object. For example I have a simple box which I unwrap and smooth out with TS modifier after applying the map it stretches because the UVs get distorted by the TS modifier. check the image to get a visual idea of what I am talking about:
Uploaded with ImageShack.us
View 2 Replies
View Related
Aug 16, 2011
I use "Add: Pick Points" to hatch my elevations. The hatch does not seem to stretch when I need to stretch the elevations. Is there a way to make it stretch?
View 4 Replies
View Related
Jan 27, 2014
I am using Illustrator and I want to be able to select the arm or leg of a line drawing cartoon character and reposition it to create a new position without having to redraw the arm or leg.
I know you can do this in After Effects with the puppet tool. Is there a similar function in Illustrator?
View 2 Replies
View Related
Apr 21, 2012
Prior to 2013 I have been able to stretch wipeouts - it seems that this command no longer works!! Is there system variable that needs to be altered? or have Autodesk simply removed the functionality??
View 9 Replies
View Related
Sep 12, 2012
Simple problem: When I select a line, normally three grips appear; the ends and the middle. Normally, when I want to stretch (resize) a line I click one end and simply drag it to the desired location. Often it *snaps* to another nearby grip point, the middle selected grip, a line that it crosses, etc. If I zoom in I normally can put the grip any where I want to. It has worked fine up until this morning. Last night when I closed the program it worked perfectly...first thing this morning it doesn't work at all. Restarting the program and the computer had no effect.
The grip will only snap to the other origin (making it zero length) and other random points nearby. I cannot make it a random length...it must snap to those other points, and it *will not* snap to the middle point of the line, which I do all of the time.
Did I accidentally hit a CTRL+ or ALT+ key-stroke which has changed the abilities to snap?
View 9 Replies
View Related
Apr 4, 2013
In Revit, how can I stretch a building in one direction, including all floors, in either plan or elevation? Let's say a wing of a 3-story building is 20' long, and I want to make it 24' long.
In ACAD, there is the stretch command that uses a fence.
Granted I would have to use stretch on each plan & elevation drawing, but all elements within the fence are sretched.
Do I have to move a grid, and hope that I've locked all walls on all floors to that grid so they move when the grid is moved?
View 1 Replies
View Related
May 30, 2013
Any way to get the same squash and stretch (preserving volume) results using 3Ds Max CAT and the Skin Modifier. I heard that using an Expression Controller is one way of doing it but where to find documentation or tutorials on the process.
View 4 Replies
View Related
Nov 26, 2013
I'm trying to add dimension with the stretch actions.
View 9 Replies
View Related
Oct 12, 2011
I have a few horizontal lines parallel to each other. I'd like to make all of those horizontal lines longer by multiplying their length by a factor (let's say 2)
The scale command doesn't work as I intent, since it makes the spacing between those lines "x" times greater as well.
Which command should I use?
View 2 Replies
View Related
Jul 26, 2011
I'm looking to make a dynamic block that will either strech up or down but some of the element stay the same in the other visivility
Here is a block i am talking about!
dynamic block.dwg
View 3 Replies
View Related
