I am trying to create a rubber stamp effect over a jpg by using the following steps: URL....
When I Live Trace the below image "A" it doesn't look like the original and changes into image "B".Also, I cannot seem to extract the white from the picture after I have Live Traced it?
I am trying to create a distressed, rubber stamp effect in Photoshop and am having some difficulty with the orientation of some of the text inside a text wrap. The text on top appears just how I want it, but when I try to place text on the bottom, it appears upside-down. I've tried using text-warp as well, but it obviously distorts the text and I don't want that. Is there an easy way to have the text on the bottom of text-wrapped circle orient rightside-up?
View 6 Replies View Relatedmake a rubber stamp effect:
View 6 Replies View RelatedI am trying to distort/shape a photo to fit into another shape, in the shape of a shield. Its something that would be reused on other pictures.
2 things i would like to do, first is of course as above
the other, is there any way to create like a rubber stamp or a cutting tool, that once I have the shape I want created, I can use that to copy/cut/paste that image shape from other images also ?
Is there a way to create a rubber band effect (similar to drawing lines in Autocad) in drawings in Inventor. Possibly using ClientGraphics but not just inside of a DrawingView.
View 1 Replies View Relatedanyone know a good place to go for a rubber stamp tutorial or have any experience creating one themselves? im looking for something in the vein of 'conspiracy' or 'confidential' like the red rubber stamp you see on paper work that gets 'denied' or a paper that 'failed' in the movies. something you might see on a manila folder that says 'confidential' or 'conpsiracy'.
View 3 Replies View RelatedWhat is the best way to create an "inked rubber stamp" look?
I realized that you turn it into a bitmapped tif and colorize it in a layout program. I am mainly interested in ways to "weather" or "stress" bitmapped logos, etc. Is there a filter or is it done by manually?
I'm new to Photoshop and have been trying a few things to get better acquainted with it, one of those things is drawing and using a rubber stamp. With this aim in mind, I followed this tutorial: at the start when I click on New I chose 800 x 600 then chose a 'transparent' background, everything goes as it should through the tutorial right upto the end at the point I apply the 'spatter' effect it unfortunately doesn't have the same effect as it did with the non-transparent background. Also how do I actually 'use' or 'apply' the image to another image or letter?
View 5 Replies View RelatedI have been using Photoshop ver 5.0 for a couple of years, off and on, and never had a problem with the Rubber stamp tool until recently. It always worked. I just selected it, then the pen size, then held the alt key down to select some color pixels, then clicked where I wanted to paint.
It doesn't work anymore. As soon as I hold the alt key down and try to select a pixel, up pops a dialogue box saying, "Must define a pattern" ??? I have searched through the help index, tried various things, but cannot find the solution.
Running 5.5 I double clicked on the rubber stamp tool & cleared the aligned box in the rubber stamp options palette. Then I alt clicked in the image. Then I clicked & dragged in another part of the image. The cross cursor at the source point moved as if the aligned box was still checked. How do I get the rubber stamp to work in the non-aligned mode?
View 1 Replies View RelatedI've tried several techniques to try and copy it but I can't get it to look good.
View 5 Replies View RelatedI've got a problem using the rubber stamp tool. I want to use it to clone some dust spots out on several photos which are part of a time-lapse scene. Therefore I thought it would be easy to record using the rubber stamp tool, then applying the action to all photos via a batch process.
However, it doesn't seem to work. All my other steps in the action occur, but not the rubber stamp tool. Same is true for the healing brush.
I have installed CS4 on my desktop and my laptop. On the desktop version, the Clone tool looks and behaves exactly as it should and I have no problem with it.
However, on my laptop, the tool looks like a rubber stamp (the same icon as is in the palette) and does not work properly. Changing the brush size does no good because it's not a brush, just a rubber stamp (yes, I have chosen Clone, not Pattern).
the only thing I can think of is lack of horsepower in the laptop (for instance, only 512Mb of RAM)
I see if I apply and adjustment layer, it works for the whole clip but any filter outside of that or rubber stamp only lasts for a few frames. How do I apply them to the entire clip?
View 5 Replies View RelatedHow could I create a 'postage stamp' effect around the exterior of a rectangle -- other than typing a series of "V"'s around the perimeter?
Let not the one who says it can't be done interrupt the one who is doing it.
I want to make stamp effect of peoples heads. For example I want to put mans portrait on the some background (marble texture) but to produce stamp effect
with same colour and texture like marble, (like money coin).
how to recreate a stamp effect?
View 6 Replies View RelatedCan you make a Pen Tool path (white), and then, by using the Brush Tool, color it in automatically ONLY within the path's designated area?
Having the ability to do this would enable me to create "digital watercolor" images with texture. I would take the white paths, and then select a color and use the Opacity Tool to make the colors look like watercolor paint by using the Brush Tool. The issue is: can I make a color texture in any path?
How can I build something that looks like a rubber membrane stretched in a spot where an invisible object (say bowling ball) is sitting on the membrane? Hopefully that is enough of a description.
How to do this effect. Extrude does not give me the desired effect. Pretty much a beginner in Illustrator.
I am creating a canoeing map for my daughters. I want to change the map from this...
into something that looks more like this...
Specifically, is there a Live Paint Bucket effect that can mimic the blue watercolor border in the antique map?
I've taken over a web site and need to copy the compnay logo ( copy attached)
The basics are fairly straight forward but my problem is creating the curved line with the explosion effect.
the title says it all, how do you realisticly recreate a embroided patch effect. think of militairy patches.
this pictures shows what i mean [URL]
i have been fiddling around with the scribble effect. but i cant get the lighting to look right.
How to create the effect of an object (in this case a crown) hanging on the edge of a letter (on the end of a word). I am designing a logo for our kids ministry at church. It is called "Kids of the King" and I have an eps of a crown and I want to hang the crown off the K in the word King. I am trying to make it where the back half of the crown is hidden behind the K so it gives the effect of it hanging off the edge of the letter.
View 1 Replies View Relatedwhenever I try to create the effect to looks flat. The red lines stay on the top and do not wrap it suggesting the straw to be 3D. Another problem i am having is making the shadows on the straw to also look realistic.
View 7 Replies View RelatedI am trying to create a graphic style that will give me a frame that has the 3d rounded effect. Bevel and Extrude isn't what I am looking for... I have a pic here with a bevelled edge effect, but it has a flat surface...and I want it to look round...
View 14 Replies View RelatedI am looking to create a 3d bubble then select it then stamp it randomly. I can create shapes but they are only black/white.
View 2 Replies View RelatedI want to apply geographic map over another image but to look like water stamp over the image. How can I create such effect with photoshop or some plugin is aveilable.
View 9 Replies View RelatedI'm making some graphics to be printed on a car. I have some lines with outer glow on them, but Illustrator won't render these unless I use 72DPI in raster effects reslution. I would like to go higher, but it won't give me anything. Guessing it's to heavy for Illustrator maybe? Is there anything I can do about this? I'm making my graphics in 1:1 scale, but I do it in a lower scale since it's just vector art anyway, however how would that effect my glow? Since it's a raster effect.
View 9 Replies View RelatedI created a 3D drop shape and need to totaly change the colors (from red to yellow)... I use illustrator CS5
View 4 Replies View RelatedOur project this time around is create a stamp.
I've been attempting to create a cut- out border using the Minus Front tool, within the Pathinder window, in order to cut small circles out of the edge of a rectangle, giving it that perforated, stamp-edge look to its sides. Unfortunately, everytime I try to use the Minus Front option to cut them away from the rectangle, I end up making all of the circles disappear, except for the one that was originally selected, and I simply cannot make the Minus Front happen the way I'm looking for.
What I have, with my circles drawn out and properly spaced, looks like this:
So, I take the regular selection tool, hold down Shift, and select them all, being extra careful not to click on the rectangle itself:
And select the Minus Front option, only to be left with:
When i use the freeform pen tool (Or any others)I cant get the rubber to rub any of them out.
View 1 Replies View Related