Illustrator :: Using Minus Front For Stamp Format?
Jan 20, 2013
Our project this time around is create a stamp.
I've been attempting to create a cut- out border using the Minus Front tool, within the Pathinder window, in order to cut small circles out of the edge of a rectangle, giving it that perforated, stamp-edge look to its sides. Unfortunately, everytime I try to use the Minus Front option to cut them away from the rectangle, I end up making all of the circles disappear, except for the one that was originally selected, and I simply cannot make the Minus Front happen the way I'm looking for.
What I have, with my circles drawn out and properly spaced, looks like this:
So, I take the regular selection tool, hold down Shift, and select them all, being extra careful not to click on the rectangle itself:
And select the Minus Front option, only to be left with:
I use minus front all the time... well, I'm trying to make a pie chart with just the outside (see example). The logical way to do this to me is the make the pie chart, put an ellipse over everything and "minus front" it using the pathfinder tool. Well, I did this, and even though "minus front" is an available option--I can even click it--nothing happens when I click it. Even when I isolate each wedge of the pie chart, I cannot get any part of it to clip using "minus front."
I am creating some icons with numbers on. I need them to be on a transparent background. I have created the main shape and I simple what to cut out the number that I have put in the middle so it will appear the same colour as the background. I have successfully done this with some of the icons by using the following process:
Create the Number with the text tool > Create Outline > Select Object and main Shape > Use Minus Front Path Finder Tool.
This was all going really well until I got to 4. When I minus the number object the shape distorts so the upright column of the 4 becomes wide then the original text version. The change is too much to ignore. The same problem happens with 10, 11 and 12. The problem appears to be with the upright columns but strangely is not a problem with the 1.
It looks like the path anchors are snaping to the grid I have no the Artboards. The scale of the distortion depends on the distance from the nearest gridline. I have tried turn off snap to grid and the grid itself but I still get the same result.
What i'm trying to do is cut multiple circles in half (45° angle), i know that i need first "outline stroke" to make the circle lines into object (i think it's called). I have used "offset path" to get more of these lines.
I was told that if i want to cut the other half of the circle i need to use pathfinder, but everytime i use the "minus front" option, it leaves me with only on half circle while i mad 2 circles, the second circle disapppeard. How can i cut both circles in one go. (is there a way to combine these circles (not grouping))
I brought a pdf into Illustrator and I want to draw a line over a portion of that pdf, but when I draw the line it appears to place it behind the pdf - obscuring portions of the line. I have tried selecting the new line and bringing it to the front or selecting the pdf and sending it to the back without any success.
what I do, my text box will not come to the front of my color-filled box. Is this a pc bug? I am used to working on Illustrator with a mac and experience little problems. I am using CS5 with Windows 7.
I'm new to the adobe family and I'm working on a design for one of my friends and he came across a look he was wanting. The problem is I cant figure out how to get the text that is overlapping to alternate from in front to behind and so on and so forth.
I have illustrator cs6 on mac OSX 10.8.2 and when I hit command f .. for copy in front .. i get a text box with my signature and address in it. I cant remember assigning command F ever to this? but maybe I did many years ago. As I am just delving into illustrator, it has never been an issue but obviously, now it is. I have looked at edit>keyboard shortcuts but am unfamiliar with it and so dont want to mess with it. How to get command F to function as it should?
on my Windows 7 home computer I am able to create UI progress bars and popup messages for my UI window and everything works just fine. Now, I come to work on the Macintosh and they don't work so well. In this question, I would like to learn if there is a technique to bring a palette to the front when one is created, such as for this progress bar example, on a Mac. The palette appears deactivated and in back for me. It is unseen most of the time because it appears in the center of the screen behind the window by default, and when I move my window we can see the palette but there is no progress bar going on.
As you can see in the screenshot, my main window is deactivated because I attempted to get the progress bar active by deactivating the main window, obviously not successful. I also set the palette to active, which did not work.And, as I have implied, on my home computer on Windows things appear just as expected with the progress bar working and palettes appearing in front and active.
I am having trouble with the Paste in Front/Back function. I will copy my selected layers and then want to paste them in place on the selected artboard next to it and often times it pastes it back on the artboard where it copies from. Sometimes the function does what I want, but often times it pastes in a different location, either on the same artboard, or next to the artboard where I want it pasted. It also tends to slightly move the X and Y values (again, sometimes). Each time I go to paste, I am creating a new layer and selecting the artboard where I want everything pasted, but sometimes it works, and other times it doesn't. I am using CS5 on MacBook Pro.
I constantly run into the problem that I have many objects and when I want to drag the selected object to move it around, the object laying in front / or on top of it will be grabbed and moved instead. How do I shortcutwise avoid to pick an unwanted object when I'm about to drag an object ? Is there something like a key to hold, so that Illustrator understands that I want to move the already selected object only ? Since that is a 100 times per day task and I can't always lock and unlock all other layer I'm working on too ... well I could, but that would slow down working 100 times since it's not easy to identify / switch on of each layer in the layer list each time i pick another object ...
I would like to place a small square in front of multiple lines of text. I want to use it like a square that would be used as a checklist.
1. Where I can find a square in the Glyphs panel?' 2. If I create a square shape, and want to place it front of each line of text layed out in a text box, what is the best way to line the square on each line with each line of text?
When I open Gimp, I have my Toolbox and Layers and everything. But, when I click on the picture I'm editing, both the Toolbox and Layers minus out on me, and, to select another brush or tool or something, I have to manually open it back up every single time.
I am trying to create a rubber stamp effect over a jpg by using the following steps: URL....
When I Live Trace the below image "A" it doesn't look like the original and changes into image "B".Also, I cannot seem to extract the white from the picture after I have Live Traced it?
We are using Autocad 2012 & some of our users can not put Degree, Diameter, Plus/Minus Symbols in their drawings.%%P, %%D, %%C does not work in single line or M-Text. The symbols work In dimensions.
I have a strange thing going on. I could swear there used to be the standard Browser control of - + and reduce box in the Top RH corner like in any window and every other adobe product. However, I got a virus it was hiding in Adobe reader. I believe I cleaned it as I scanned with two different virus companies. Both came up nothing found. Cleared my Temp folder, dumped trash after un installing AE. Re installed AE and still no window control?
Plus in my system start tray where my programs are where Adobe Master Collection Folder is I open that an my AE icon is a generic icon, although it will work as a shortcut.
The other thing is that it is evident in my task bar as a 'pinned icon' Here is a screen shot of AE with no + or - in top corner...
In the Bridge under the Tools...Batch Rename....under file names......I deleted the dates and test box by clicking on the minus sign so how do I get them back?
how to write a field that will add or subtract one from the drawing number. I'm adding drawing join line text to drawings so I need the text on the left to read one less than the current drawing & text to the right to read one more.
in drawing 005 text would read "joins drawing 004" & "joins drawing 006"
I outlined my text and subtracted it (and the tree image) from the black background. When I did this both appear thinner - particularly the tree.
If I then take the original version and the new subtracted version, and view them both overlayed one on top of the other in wire frame (outline) mode, there is no difference in the actual lines.
It seems to be a problem with the way illustrator previews the images. This wouldn't concern me, but when I export the file as a jpeg, the lines also appear thinner in the export.
I can create a manual solution by offsetting the path before subtracting, but this isn't ideal.
I have the words Kuhns Creations here, it is going to be the logo for my website. In the end the letters will all be the light blue color that "Kuhns" is right now, I'm just using the different colors to explain my problem. I want the pink part of the "C" to be in front of the "K", but I want the black part of the "C" to be behind the "K", giving the illusion that the "C" is passing through the "K" (this will only be visible cause of the drop shadows on both letters, since they wil both be the same color) Is there a way to do this?
I got this effect in Photoshop, but I need to do it with vectors because the size of the image that has to be uploaded to my website is so small that you lose all detail if its a bitmap (52 pixels x 103 pixels) In addition to the effect explained above I am trying to get a bevel effect. In Photoshop it works and is easy to do but in illustrator the settings are all different and anything I enter looks totally different.
The settings that I'm using in Photoshop are: Style: inner bevel, technique: smooth,depth: 1%, direction: up, size 10 px, soften 0 px, angle:,120 degrees, altitude: 30 degrees, highlight mode: screen, Opacity: 75%, shadow mode: multiply, Opacity:75%. How do I get this same effect in illustrator?
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
I often find myself saving illustrator files in both ai and pdf formats. Since pdfs can be re-opened and modified in illustrator i wondered if i could stop saving in .ai
