Illustrator :: Create Effect Of Object Hanging Off The End Of Text
Oct 3, 2012
How to create the effect of an object (in this case a crown) hanging on the edge of a letter (on the end of a word). I am designing a logo for our kids ministry at church. It is called "Kids of the King" and I have an eps of a crown and I want to hang the crown off the K in the word King. I am trying to make it where the back half of the crown is hidden behind the K so it gives the effect of it hanging off the edge of the letter.
View 1 Replies
ADVERTISEMENT
Nov 10, 2006
There is probably a simple fix for this, but I can't seem to figure it out. So I created a circular path, and over the top I wrote "Satisfaction" now under the bottom I want it to read "Guaranteed" .... but the text will not hang from the path and read from left to right...it will only write upside down from right to left, or you can flip it so that it's inside the circle reading from left to right...but i want the top of the text to align with the outside of the circular path.
View 1 Replies
View Related
Jun 18, 2013
If I drag an effect from the target circle of one object to anther in the layer's panel it replaces the effect along with all appearance. But I want just to add the effect. For example, a layer has a drop shadow and a path, round corners. I want to move the drop shadow from the layer to the path so that the path now has the round corners and the drop shadow. To do this I have to open the shadow effect of the layer wright down its parameters, then create a shadow effect for the path with the same parameters which is a lot of work.
View 3 Replies
View Related
Mar 25, 2012
For example, object A has 10 effects and I want to copy one of them to object B which has a number of its own effects that I want to keep.
View 3 Replies
View Related
Jun 16, 2011
I have attached a logo I want to create. The text is running through this silhouette I have made and when it runs through the silhouette I want to change the text from black to white in only the places it is on top of the silhouette so it can be read.
View 9 Replies
View Related
Jul 5, 2004
can i create this look without having to resize each letter?
View 4 Replies
View Related
Jun 19, 2013
When I try to copy an object in illustrator which has gradient effect in it, gradient changes in the next copied object. how to overcome this issue.
View 6 Replies
View Related
May 7, 2004
IM DESIGNING A BAND LOGO, ITS A HARDCORE BAND, THEY WANT A RUSTY EFFECT ON THE LOGO, BUT I STILL CANT FIND THE BEST WAY TO CREATE THE EFFECT,
View 3 Replies
View Related
Sep 24, 2008
I want to create the text "RoMa" like a fireworks (see below image - text should replace the stars and should look like firework). Please tell me how to do it. Would be great if you could post a tutorial or a link to it or would be even better if you could send me an action for it.
View 1 Replies
View Related
Sep 24, 2008
I want to create the text "RoMa" like a fireworks (see below image - text should replace the stars and should look like firework).
I want to do this for a flyer i am doing (300dpi).
View 1 Replies
View Related
Nov 19, 2012
How can I remove the shadow effect under the blue object? I am using Illustrator CS6.
View 2 Replies
View Related
Oct 9, 2012
I would like to create a gloss varnish effect like the below image. To apply to a logo or text to make it look like it has a spot varnish gloss coat. Looking at the image, it looks like it would be quite simple and not too technical but I can't seem to replicate the effect.
View 9 Replies
View Related
Jul 31, 2013
I want to create something like this:
The text is in farsi, and i don't even know how to make it in center, like the photo.
View 6 Replies
View Related
Nov 7, 2011
How to create a cool rainbow nebula text effect that you can play with. This is a fairly easy effect to achieve.
The result will look something like this:
1. Create a New project and set your dimensions. In this case, I am going to use 500 x 200. This part is up to you.
2. I think this effect goes best with a dark color(black) so use the fill tool to turn your background black(or your color pick if it is different).
3. Next, add your text using the text tool. I believe the font Century Gothic goes well with this. However, I am going to use my logo with this. Make sure whatever you do, if you use your logo or not, that your subject is white.
4. Right-click on the text/logo layer in the layer panel and select Alpha to Selection. Then create a New Layer and go the Filters→Render→Clouds→Plasma and click OK. Put this layer on the below the text one if it is not already.
5. Now Gaussian Blur the text layer by 5 pixels and set the Layer Mode to Overlay.
6. (This step is optional. I am going to do it though because it gives a good result in my opinion.) Duplicate the Plasma Layer and Gaussian Blur it by 5 pixels. Then you can play around with the opacity with the Layer Mode on Screen, I set mine to 50%. Then duplicate the text layer and lower the opacity which I did to 50%. This gives the text more shine.
The result will look something like this:
View 2 Replies
View Related
Nov 4, 2013
I have traced an image and expanded it. I'm now trying to add the scribble effect to it but it does not work. I assume it's because it's not an object but I'm new to illustrator so I'm not sure.
The image is here: [URL] ....
I basically want to add texture to the black eagle only.
View 6 Replies
View Related
Nov 19, 2013
Can you make a Pen Tool path (white), and then, by using the Brush Tool, color it in automatically ONLY within the path's designated area?
Having the ability to do this would enable me to create "digital watercolor" images with texture. I would take the white paths, and then select a color and use the Opacity Tool to make the colors look like watercolor paint by using the Brush Tool. The issue is: can I make a color texture in any path?
View 3 Replies
View Related
Mar 29, 2011
I want to know how one can add the shiny 3D effect to text as shown in the image.
I've done this in PS but unable to do in Corel.
I use Corel 12 & X3.
View 1 Replies
View Related
Jun 3, 2013
When adding a grain pattern effect to an object in Illustrator CS6 I get an odd bevel that surrounds the object. There is nothing in the Appearance window to suggest that there should be a bevel and I didn't add it myself.
Is there some setting I am missing or an easy way to remove the effect? For now I am masking the object with a slightly smaller object but it's starting to drastically increase the size of my file.
View 6 Replies
View Related
May 9, 2012
I am trying to create a rubber stamp effect over a jpg by using the following steps: URL....
When I Live Trace the below image "A" it doesn't look like the original and changes into image "B".Also, I cannot seem to extract the white from the picture after I have Live Traced it?
View 11 Replies
View Related
Aug 16, 2012
I am creating a canoeing map for my daughters. I want to change the map from this...
into something that looks more like this...
Specifically, is there a Live Paint Bucket effect that can mimic the blue watercolor border in the antique map?
View 3 Replies
View Related
May 4, 2013
I've taken over a web site and need to copy the compnay logo ( copy attached)
The basics are fairly straight forward but my problem is creating the curved line with the explosion effect.
View 6 Replies
View Related
Jul 8, 2013
Not sure if GIMP can actual do this.
I am looking to create text words that have a silver/bright mirror effect. The effect might look like silver liquid (water) effect. Or do you know what software it could be designed on.
View 2 Replies
View Related
Dec 16, 2010
the title says it all, how do you realisticly recreate a embroided patch effect. think of militairy patches.
this pictures shows what i mean [URL]
i have been fiddling around with the scribble effect. but i cant get the lighting to look right.
View 18 Replies
View Related
Nov 30, 2013
whenever I try to create the effect to looks flat. The red lines stay on the top and do not wrap it suggesting the straw to be 3D. Another problem i am having is making the shadows on the straw to also look realistic.
View 7 Replies
View Related
Mar 22, 2013
I am trying to create a graphic style that will give me a frame that has the 3d rounded effect. Bevel and Extrude isn't what I am looking for... I have a pic here with a bevelled edge effect, but it has a flat surface...and I want it to look round...
View 14 Replies
View Related
Jan 2, 2014
how do i a shadow text effect like this i tried the drop shadow but it doesnt quite look the same has this?
View 9 Replies
View Related
Nov 26, 2012
I often have complex vector objects which contain paths and I want to create a path around the object.
I have tried Offset Path, but this command also offset the interior of the object. I have also tried Effect>Path>Offset Path, but the original path that I selected disappears and is replaced by the new offset path. I want to keep the original path and have an offset around it. I am a long time AI CS3 user.
My problem is that I create engravings of images and I want my machine to cut an outline around the engraving, the outline being X pts bigger than the engraving.
[URL]
View 7 Replies
View Related
Oct 18, 2012
Using C3d 2013. I am looking for a way to place the deflection angle of the PI of an Alignment in the label of a structure part that references said alignment. But PIs aren't an option when I select Reference Text type. Common sense tells me it would be under Alignments, but none of the PI data is an option of the Contents' Text Component Editor. I couldn't find it under any of the other Reference Text types either. I can pull the station value from the referenced alignment, is there a way to get it to tell me the deflection angle at the PI it sits on? Or even the difference in the instantaneous direction just before and just after the part?
I know listing the deflection angle of a PI is possible, as I have seen it in several examples of labeling alignments. I just want to place it in the label of other objects.who can tell me how to display LT (to represent left) and RT (to represent right) when the deflection is positive or negative respectively.
View 7 Replies
View Related
Jul 2, 2013
I have text with an arc effect. I want the text to knock out of a background and stay in arc. I tried making a compound object and pathfinder but the text straightens out. How do I do it?
View 6 Replies
View Related
Apr 18, 2012
Is there a way to give Bevel & Emboss effect to text in Illustrator, the same way like in Photoshop?
View 10 Replies
View Related
Apr 10, 2013
I am uing the 3D text effect in illustrator.
Problem is that my text creates lines. (See image below)
How do I make my 3D text smooth?
View 5 Replies
View Related
