anyone know a good place to go for a rubber stamp tutorial or have any experience creating one themselves? im looking for something in the vein of 'conspiracy' or 'confidential' like the red rubber stamp you see on paper work that gets 'denied' or a paper that 'failed' in the movies. something you might see on a manila folder that says 'confidential' or 'conpsiracy'.
View 3 RepliesWhat is the best way to create an "inked rubber stamp" look?
I realized that you turn it into a bitmapped tif and colorize it in a layout program. I am mainly interested in ways to "weather" or "stress" bitmapped logos, etc. Is there a filter or is it done by manually?
I'm new to Photoshop and have been trying a few things to get better acquainted with it, one of those things is drawing and using a rubber stamp. With this aim in mind, I followed this tutorial: at the start when I click on New I chose 800 x 600 then chose a 'transparent' background, everything goes as it should through the tutorial right upto the end at the point I apply the 'spatter' effect it unfortunately doesn't have the same effect as it did with the non-transparent background. Also how do I actually 'use' or 'apply' the image to another image or letter?
View 5 Replies View RelatedI have been using Photoshop ver 5.0 for a couple of years, off and on, and never had a problem with the Rubber stamp tool until recently. It always worked. I just selected it, then the pen size, then held the alt key down to select some color pixels, then clicked where I wanted to paint.
It doesn't work anymore. As soon as I hold the alt key down and try to select a pixel, up pops a dialogue box saying, "Must define a pattern" ??? I have searched through the help index, tried various things, but cannot find the solution.
Running 5.5 I double clicked on the rubber stamp tool & cleared the aligned box in the rubber stamp options palette. Then I alt clicked in the image. Then I clicked & dragged in another part of the image. The cross cursor at the source point moved as if the aligned box was still checked. How do I get the rubber stamp to work in the non-aligned mode?
View 1 Replies View RelatedI've tried several techniques to try and copy it but I can't get it to look good.
View 5 Replies View RelatedI've got a problem using the rubber stamp tool. I want to use it to clone some dust spots out on several photos which are part of a time-lapse scene. Therefore I thought it would be easy to record using the rubber stamp tool, then applying the action to all photos via a batch process.Â
However, it doesn't seem to work. All my other steps in the action occur, but not the rubber stamp tool. Same is true for the healing brush.Â
make a rubber stamp effect:
View 6 Replies View RelatedI am trying to create a distressed, rubber stamp effect in Photoshop and am having some difficulty with the orientation of some of the text inside a text wrap. The text on top appears just how I want it, but when I try to place text on the bottom, it appears upside-down. I've tried using text-warp as well, but it obviously distorts the text and I don't want that. Is there an easy way to have the text on the bottom of text-wrapped circle orient rightside-up?
View 6 Replies View RelatedI have installed CS4 on my desktop and my laptop. On the desktop version, the Clone tool looks and behaves exactly as it should and I have no problem with it.
However, on my laptop, the tool looks like a rubber stamp (the same icon as is in the palette) and does not work properly. Changing the brush size does no good because it's not a brush, just a rubber stamp (yes, I have chosen Clone, not Pattern).
the only thing I can think of is lack of horsepower in the laptop (for instance, only 512Mb of RAM)
I see if I apply and adjustment layer, it works for the whole clip but any filter outside of that or rubber stamp only lasts for a few frames. How do I apply them to the entire clip?
View 5 Replies View RelatedI am trying to create a rubber stamp effect over a jpg by using the following steps: URL....
Â
When I Live Trace the below image "A" it doesn't look like the original and changes into image "B".Also, I cannot seem to extract the white from the picture after I have Live Traced it?
I am trying to distort/shape a photo to fit into another shape, in the shape of a shield. Its something that would be reused on other pictures.
2 things i would like to do, first is of course as above
the other, is there any way to create like a rubber stamp or a cutting tool, that once I have the shape I want created, I can use that to copy/cut/paste that image shape from other images also ?
When i use the freeform pen tool (Or any others)I cant get the rubber to rub any of them out.
View 1 Replies View RelatedI want to make a big NO boxed in with a line through it. I have it all layed out, but I simply cannot make it look like a rubber stamp. I made two layers, used an Underpainting Filter and a Spatter Brush Stroke filter and took out the white, but it still didn't look right.
View 1 Replies View RelatedI have another paint app where it will do a brush mode that is a rubber-band mode. So if there is a brush that's 25 pixels wide and you go and click once somewhere and then move the cursor... a straight line rubberband appears connected to your cursor. When you click again, the brush is painted in a straight line to where you clicked. It's great when you are trying to quickly paint a straight line to match something in the image. Does PS have a brush mode like this? (I know that drawing paths can be stroked in straight lines, etc. but I need a brush mode that is quickly switchable to as I am speed painting thousands of images and brushing is fastest for this work).
View 8 Replies View RelatedI have a problem with PhotoShop CC. I also tested PhotoShop CS5 and PhotoShop CS6, having the same problems (last versions of them). Plugins for PhotoShop are not installed.
Â
My System:
Â
Windows 7 64 Bit with SP1Â Â (newest updates german version)
Intel Core i7-4770k CPU 3.5 Ghz
RAM:Â Â 16 GB DDR3
GPU: GeForce GTX 760 2048 MB MSI N760 TF 2GD5/OC
MainBoard: MSI Z87-G45 Gaming
Â
Monitor: Asus PB248Q   1920 x 1200  60 Hz  (connected with Display Port)
Â
All Drivers (GPU, ChipSet of MainBoard)Â are up to date.
Â
My Problem is that the Brush or rubber tool is 0,5 to 1 seconds slower than the mouse cursor. The stroke trails behind. But the brush tool still runs smooth and fluently. Its just slower than the mouse. When mouse stops moving, the brush catch up. The brush even trails behind when cursor is moving slow. When cursor is moving faster, sbrush also moves faster, but brush is never as fast as cursor. Only when cursor does not move, brush catch up.
Â
This even happens when simple brushes for example simple round brush with 100 hardness and 10 pixel of size are used.When removing Smooting in brush settings, brush tool become much faster, but not as fast as cursor.This behaviour occurs in 64 and 32 Bit Version of PhotoShop.Also, GPU Settings was changed (Basic, Normal, Advanced), but without results.Â
Â
When Aero-Surface in windows 7 is disabled, brush tool works much faster, but not smooth and fluently anymore.This also happens when I am working with a document containing only one single layer.I also tested all GPU Settings in PhotoShop (Basic, Normal and Advance), still the same problem.
Â
PhotoShop uses 60% of my Ram (8793 MB)
Â
The strange thing is: When I installed PHotoShop CS5 on my 8 years old computer with Windows XP, Brush tool with same settings was as fast as mouse cursor and it runs really smooth and fluently. The main difference is that my new Computer is using Windows 7, the old one uses Windows XP 32 Bit.
Â
Old System:
Â
Windows XP 32 Bit
AMd Athlon X2Â Â 3700+
2 GB RAM
GeForce 7800 GTXÂ Â (connected with DVI to monitor)
Â
Can it be that PhotoShop has problems with Aero Surface of Windows 7? Or with Windows 7 64 Bit?Â
Rubber sheeting a pdf with 2014? It now asks you yo select an image. Since a pdf is not an image not sure how to accomplish this. WHY DID THEY CHANGE THIS?
View 9 Replies View RelatedI wanted too add a rubber sleeve onto a device I made. The sleeve would be adjustable to the size of the pole. How do I make this flexable rubber sleeve knowing the distance it can stretch?
View 8 Replies View RelatedIs there a way to create a rubber band effect (similar to drawing lines in Autocad) in drawings in Inventor. Possibly using ClientGraphics but not just inside of a DrawingView.
View 1 Replies View RelatedIs there a way i could make the eraser square, or circular in shape and change the size?
View 9 Replies View RelatedOne drawing we have has a weird quirk. The rubber band line for the Distance command is black. The background of our AutoCAD is also black, which makes it very hard to see. This only seems to affect the Distance command as the rubber band for the Line command is grey (though the current layer is yellow).
I have confirmed this is limited to just one drawing, no matter what machine you open it on. The AutoCAD version we are using is Civil 3D 2011.
I have checked the following: DRAGMODE (auto), HIGHLIGHT (1), restored colors to default, made sure 3D views were not on, rendering off, UCS set to world.
Next step? Repairing the AutoCAD installation is not likely to fix the problem.
When I use the distance command and pick the first point the rubber band line doesn't appear and then when I pick the second point I get a distance, but I have no way of knowing exactly where the points I picked landed.
I saw another post about the rubber band being black against the black background, but that is not the problem.
When I turn Otrack on I get the rubber band, but I don't like Otrack on because it causes other problems. How to get the rubber band to work the way it did before?
How can I build something that looks like a rubber membrane stretched in a spot where an invisible object (say bowling ball) is sitting on the membrane? Hopefully that is enough of a description.
Â
How to do this effect. Extrude does not give me the desired effect. Pretty much a beginner in Illustrator.
Usually what I do is download a 3D CAD part from McMaster Carr or some other place and start from scratch trying to recreate the part or, in this case, the assembly. I'm working on modeling a simple swing-arm type of machine I've made in the past and the I've been able to recreate all of the parts with their proper ranges of motion except one. It's an Inline Ball Joint Linkage that has a rubber boot around it to keep the dust out and possibly grease in. I want to know if it is possible to model the rubber boot so that it would mimic real life movement. Right now, the boot is basically a rigid cylinder and as the linkage swivels, the solid bodies clip through each other.
I've been able to make a flexible hose type of assembly as shown here: [URL]... However, creating a 3D drawing with a spline that attaches to work points on the other assemblies causes the Ball Joint to no longer work. It will only rotate as opposed to swiveling.
I am trying to optimize a sprocket drive but need simulating the rubber belts holding the drive section together.Have access to Several autodesk products. I was able to get a short simulation in Inventor but i need a more accurate one.
View 2 Replies View RelatedHow do i use the clone stamp?
View 3 Replies View RelatedI installed the new version of PS right now but when I start with CLONE STAMP saw something unusual! I disabled the "Show Overlay" feature, when I press ALT and make a Copy from one place and when I want to paste it in another place sometimes it confused and past unusual, specialy sometimes is paste out of brush area, The settings of the tool is the same as PS CS6 and when I switch to CS6 I have no problem same as before.
View 4 Replies View Relatedhow can I get the circle for the stamp feature to come up when I start PS CC?
View 6 Replies View Relatedtry to clone stamps girl on the lefts bikini straps so it looks like shes topless.
View 1 Replies View RelatedAfter I successfully used the filter called "stamp" once, now it basically doesn't work. I can even load the original, raw photgraph that worked before and try to repeat what I did and it's doing what it does to all photos now -- all it shows is a very white, washed-out looking version with useslessly dim content, no matter how I tweak the values. It doesn't help to turn the photo black & white first, & it doesn't help to convert the image into "smart filter"-friendly. I'm doing exactly the same thing but it doesn't work now. What on earth is going on? Am I going to have to uninstall and reinstall Photoshop? That is a huge pain to just arbitrarily try unless I have to (they'll say I've installed the max amount of times... I will have to find the copy of Elements I upgraded into Photoshop full... there's never an opportunity to select the version of Elements I upgraded from because it was latter vs. than listed available, so I'll have to talk voice to someone about both matters...). I have a licensed, registered copy of Photoshop CS3 (without the rest of the suite) running on Vista 64, quad processor with 8 gig RAM.
View 2 Replies View Related