I am a Photoshop CC subscriber. Due to a hacker attack to your site, the card which I payed my subscription monthly was cancelled by the bank.So, I ask if it is possible to change my old card to a new one the bank gave me?
View 1 RepliesI downloaded Autocad 2014 and installed it on a quite good laptop: i7 3630qm and amd 7670m 2gb. The problem is that in the control panel..graphics settings..autocad says it uses intel hd graphics(the integrated video card).i switched autocad as "high performance" in AMD control panel..but nothing changed.How can i fix this?How can i use my dedicated video card?
PS.i also tried to disable the integrated one..but that isnt the solution.Driver is updated though.
I've converted a 2D image into a smart object, dragged into a project then transformed it using the Distort command (similar to how you might distort a 2d image to make it sit inside a photo frame at an angle) . I need to then warp that image around over something that looks like a curved panel thats 2D but looks 3d. Its not a 3d object, but a rendered 2d image that just looks 3d.
I'm using the Transform > Warp tool as Puppet Warp isnt available after using Distort when using Smart objects.
Warp works fine to some extent but I could really do with more handles and smaler grid for more accurate warping rather than the default 3x3 grid & handles..
Possible to add more handles/ nodes/ control points (or whatever they'e called) and/ or increase grid points in the same way Puppet Warp does this so as I drag around I control a tigher & smaller space?
I am working in AutoCAD Civil 3D 2010. I have put together a 11x17 mapset which has 30 pages. Each page has a title block with a corresponding page number. Instead of changing each title block page number one at a time, how do I change the number sequence all at once?
View 0 Replies View RelatedWhen create assembly, i placed 3 parts in order: A.ipt, B.ipt, C.ipt
And ofcourse the item number will be:
A is 1
B is 2
C is 3
this number will be the same in: item colum (in BOM table), ballon (in 2D drawing).
The problem is: i want to change this number,
A will be 2
B will be 1
C will be 3 when i ballon the part in 2D
I've used "renumber" in BOM, but it just change value in "item" colum (in BOM table), not change in "ballon" (in 2D drawing).
The page numbers in the print module are beyond the edge of the prints my printer generates. Is there any way to change the location of the page number?
View 2 Replies View RelatedI need to make installation plans on climate ceilings, which are steel cassettes with Meandro tube element located where cold or hot water is flowing through.
[URL]......
Now it may occur that a cassette is given a code 700 which represents the type of cassette. If inside the cassette is placed a Meandro element its become a follow number eg 700-01.
It may also be that the same cassette No. 700 gets another Meandro element and because the cassette has not changed shape the number 700 remains the same but the follow number change e.g. 700-02.
At the moment I change the number in the browser,(inv2012) I therefore want automatically the iproperties ,partnumber and stock number, to fit. When I go to the BOM, the part- and stock numbers automatically will be placed.
The browser codes are not displayed in the BOM. So if I specify for change I only have to do so in the browser. I wanted to do so by iLogic but then ran into problems. I found a tutorial from Rob Cohee with ilogic so you won’t forget to fill in your iproperties.
[URL].......
I also wanted to do so with the iproprtie Stock number but get an error stating that I must declare the name. How must i declare a name.
Also i was told for entering the browse name in ilogic i had to use displayName, but I get a error stating that the name is Read Only.
So how can i, after i change the browse name, automatically fill in the iproperties ‘part number and/or stock number? Is there an ilogic code for?
I want my browser name using iLogic particular change to the part number. I fill in my iproperties, the part number. Then the browser name has to take over the part number.
But i get an error.
doc = ThisDoc.Document
Dim oCC As ComponentOccurrence
For Each oCC In doc.ComponentDefinition.Occurrences
OccName = oCC.Name
oCC.Name = iProperties.Value("Project", "Part Number")
Next
So im working on this project were im modeling a ceiling, anyways I can not change or adjust the number of subds after i create the object. Lets say a create a simple cube with just 1x1x1 i can not change that after i created it... I just cant get to that menu when i click on the shape it only lets me rename it nothing else. Ive attached a screen shot.
View 3 Replies View RelatedIs it possible to change the Revision Number as starts from 0,1,2,....... in Revit Titleblock.
View 1 Replies View RelatedIs there a way to dimension in AutoCAD LT?
For example: I draw a line and when I dimension it, it comes up as 9.32, but I want that line to be 5.1. Is there a way to dimension this line? Is there code that I should be familiar with? I need the line to be exact dimensions, not just change the number.
For some reason I do not understand I cannot change the number of sides of a polygon by dubble clicking on the tool. For other tools (where you can change something) this is no problem and workes, but not for the polygon tool.
View 3 Replies View RelatedWhen making numbers for the side of a race car for example, you want both the numbers to angle (lean) towards the back of the car. So on the left side of the car, the number is leaning to the right, and on the right side of the car the number is leaning left. How do you change the text to get the number to lean the way you want it too?
View 5 Replies View RelatedWhy autocad always starts up with 2 layout tabs available on the drawing. In the template that I have created only one layout tab is available and if I create a new drawing according to that template after startup, only one layout tab is available. The template that I have created is set as the basic template for autocad, so it starts up using this template.
Now I want autocad to startup with only one layout tab available.
In AutoCAD leader settings you can set the number of point so the leader looks standard. I am searching for this in inventor and am coming up empty. I have seen other engineering drawings where I can tell that the generated data in the balloon was entered from the parts column in the B.O.M. But instead of part numbers, I have seen text. and I have mine set up to generate the Balloons that way but I do not like the leader type it is giving me. The attachment is what my leaders are looking like in inventor.
View 1 Replies View RelatedMy quick properties palette is only showing about 4 lines...(actually about 4.2 lines - explained below)
I've already changed the minimum number of rows to 20, under 'Palette Behavior', under 'Quick Properties', 'Drafting Settings', and' Tools'.
I've closed and reopened Autocad several times since i've set this, but QP box will still not show more than 4 complete lines.
I've also gone to the CUI and changed the number of attributes i want to show for each different kind of entity, so i know it's not because i dont have enough lines to show....in fact, i can see a bit of the next line....i just can't drag the window any bigger!
Currently when I create a new layer within an image, and set the horizontal and vertical size using “inches” instead of “pixels,” and display the image at 100%, it shows 10 tick marks in the ruler to equal 1 inch.
I want rulers in my image to be scaled at 1/8”. Therefore, it should show 8 tick marks in the ruler with each tick mark (incremental unit) to represent the 1/8” scale. Example: 4 tick marks would equal ½”.
How do I change the number of section views per row/column when using the create multiple section views command? It's defaulting to 8 per row.
View 9 Replies View RelatedIt seems to be set at 17 but I can't find a way to change it.
Autocad help is not useful at all as it says change the field to a user defined one, whilst not actually telling you how to do that.
How to change the number of decimal places of the elevation of points?
as the points are labeled with their elevations, I couldn’t find how the number of the decimal places of the elevation be chosen. In this case, I wanted to let the number of the decimal places to be zero.
How to set the number of the decimal places to be zero or 1, for example? how to sepcify it height (size)?
Screenshot below.
When we generate a gear pair using the design accelerator, the balloon from the drawing assembly only reflect one number instead of 2 different numbers. How can we change the number to reflect individual gears. Attached is the graphics.
View 1 Replies View RelatedPage No. font size change when save a cdr file from corel x6 to x5
see images
Download this image here [URL] ..........
The defaul label style for the Elevation of points is set to 3 decimal places. We are trying to change the elevation display to 2 decimal places. We have tried the directions in the following discussion: [URL].......
Which is:
Toolspace
->Settings
-->Drawing name
--->Edit Drawing Settings
---->Ambient Settings
----->Elevation
------>Precision -> We modify from 3 to 2 decimal places.
It does not modify the display settings.
Also:
Toolspace
->Settings
-->Drawing
--->Point
---->Label Styles
----->(right-click) Edit label styles
------>Layout
------->Text
-------->Contents
--------->click on the "..." (three points) button
(Open "Text Component Editor - Contents"
--------->Select Point Elevation in the driop down list.
---------->Precision: Set to 0.01
------------>Ok, Apply, etc...
This does not seem to work either.
How to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
When I try to use the Oil Paint filter tool I receive an error claiming that an "uknown graphics processor error" had occured. I then checked under my preferences and Photoshop is not using the correct graphics card. Is there a way for me to fix this problem so that I can use photoshop? I have a switchable radeon graphics card in my computer and use catalyst control center to manage it.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2195 MHz
[code]...
Required plug-ins:
3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
[code]...
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE
which video cards/technology on Video cards are best for photoshop.
View 5 Replies View Relatedim am designing my own DJ Business cards. and i need some help on aligning everything and get all the shapes, shading, logo, text, pictures , and everything just perfect and ready for printing. You could also change the whole design but its up to you Im a DJ and I was looking for a nice, professional, Digital, 3D design. I have both the front and the back designed out but i don't have any idea how to upload the photoshop (.psd) files
View 1 Replies View RelatedCurrently my display card is a NVIDIA Quadro FX 500/600 PCI. One of the reasons I chose this card is it supprted dual montors. Now that I have upgraded to CS4 Extended I need to upgrade my display card.
When I went to Adobe's List of tested graphics display cards for Photoshop CS4 and seen such a long list of cards for Windows.I thought I would come here and ask if any body else has upgraded theirs. I would perfere to go with a nVidia card. Do any of these cards support dual monitors? Or how can I keep using my two montors?
I had one of 3 Transcend 1G cards result in complete failure, loosing about 400 pictures of Costa Rica birds. Neither the camera nor computer would recognize card after the shoot. Disk Doctors disassembled the card and hooked it up to test modules and ran multiple 5-6 hour tests to try to reconstruct data. Nothing worked as they said all the files were corrupted. This is the one disk that I shot until full with a Nikon D40X camera. Card was formated before use. I reviewed pictures as I shot and all seemed right.
They theorize that perhaps the card and camera did not communicate, but I shot at most only a couple of RAW format pictures over the capacity, so to me that does not seem logical it would corrupt everything. But not an expert either.
The technician said not to fill up the card and use smaller cards so you don't have all the shots in the same basket.
what is the most adequate graphics card to run Photoshop 7.0 on a daily basis?
I am currently looking to purchase a new computer and I am considering my options.