I am working in AutoCAD Civil 3D 2010. I have put together a 11x17 mapset which has 30 pages. Each page has a title block with a corresponding page number. Instead of changing each title block page number one at a time, how do I change the number sequence all at once?
View 0 RepliesHow I can change the sequence in my propertieswindow?
I give in my parameters and wich parameter I put in first comes on top of the properties list. If I delete the parameter that is first on the list and I put it in again it joins the list at the botom.
Now I want to control the sequence of the properties window so I can have it for al blocks the same. that makes it easier to use.
Like in the picture that you can find in the attachment. I want to put elements on top of the list so I can choose The elements (with visibility) first and then I want to put in the width and height.
How to change the attribut order in the question sequence.
View 6 Replies View RelatedI hope Autodesk can have a easier way to edit the "input/output parameter" sequence. Today I found I cannot even delete a parameter. Whenever I want to delete a parameter, SAC just frozen.
View 2 Replies View RelatedWhen I created my subassembly with subassembly composer, it's difficult to change the sequency of the input/output parameters. Do we have an easy way to do that, Like moving?
View 4 Replies View RelatedI tried working on PNG image sequences instead of video footages.the problem is Smoke recognizes the fps as 59.94, and i want to make it down to 25fps.i tried using PAL.cfg, the frame rate did change to 25fps but when the sequences are imported in the timeline, its still 59.94fps.
View 6 Replies View RelatedI did a project with one sequence at 24fps, but I need change framerate of sequence to 25 fps for not have that reedit all, now. Is possible change framerate of sequence and that automatic way the editions be adapted at this framerate?
View 4 Replies View RelatedAfter selecting 2 (or more) files and right clicking and choosing Multi camera sequence from source, I drag the newly created sequence on to the time line but all I get is the two files on the time line stacked over one another. the sequence never gets created.
View 3 Replies View RelatedWhen create assembly, i placed 3 parts in order: A.ipt, B.ipt, C.ipt
And ofcourse the item number will be:
A is 1
B is 2
C is 3
this number will be the same in: item colum (in BOM table), ballon (in 2D drawing).
The problem is: i want to change this number,
A will be 2
B will be 1
C will be 3 when i ballon the part in 2D
I've used "renumber" in BOM, but it just change value in "item" colum (in BOM table), not change in "ballon" (in 2D drawing).
Simple way to select multiple clips in a sequence and change their durations to, lets say, 5 frames each. I'm basically trying to make a "stop animation" edit using footage that was recorded with different durations.
View 1 Replies View RelatedI need to make installation plans on climate ceilings, which are steel cassettes with Meandro tube element located where cold or hot water is flowing through.
[URL]......
Now it may occur that a cassette is given a code 700 which represents the type of cassette. If inside the cassette is placed a Meandro element its become a follow number eg 700-01.
It may also be that the same cassette No. 700 gets another Meandro element and because the cassette has not changed shape the number 700 remains the same but the follow number change e.g. 700-02.
At the moment I change the number in the browser,(inv2012) I therefore want automatically the iproperties ,partnumber and stock number, to fit. When I go to the BOM, the part- and stock numbers automatically will be placed.
The browser codes are not displayed in the BOM. So if I specify for change I only have to do so in the browser. I wanted to do so by iLogic but then ran into problems. I found a tutorial from Rob Cohee with ilogic so you won’t forget to fill in your iproperties.
[URL].......
I also wanted to do so with the iproprtie Stock number but get an error stating that I must declare the name. How must i declare a name.
Also i was told for entering the browse name in ilogic i had to use displayName, but I get a error stating that the name is Read Only.
So how can i, after i change the browse name, automatically fill in the iproperties ‘part number and/or stock number? Is there an ilogic code for?
I want my browser name using iLogic particular change to the part number. I fill in my iproperties, the part number. Then the browser name has to take over the part number.
But i get an error.
doc = ThisDoc.Document
Dim oCC As ComponentOccurrence
For Each oCC In doc.ComponentDefinition.Occurrences
OccName = oCC.Name
oCC.Name = iProperties.Value("Project", "Part Number")
Next
Is there a way to dimension in AutoCAD LT?
For example: I draw a line and when I dimension it, it comes up as 9.32, but I want that line to be 5.1. Is there a way to dimension this line? Is there code that I should be familiar with? I need the line to be exact dimensions, not just change the number.
Why autocad always starts up with 2 layout tabs available on the drawing. In the template that I have created only one layout tab is available and if I create a new drawing according to that template after startup, only one layout tab is available. The template that I have created is set as the basic template for autocad, so it starts up using this template.
Now I want autocad to startup with only one layout tab available.
In AutoCAD leader settings you can set the number of point so the leader looks standard. I am searching for this in inventor and am coming up empty. I have seen other engineering drawings where I can tell that the generated data in the balloon was entered from the parts column in the B.O.M. But instead of part numbers, I have seen text. and I have mine set up to generate the Balloons that way but I do not like the leader type it is giving me. The attachment is what my leaders are looking like in inventor.
View 1 Replies View RelatedMy quick properties palette is only showing about 4 lines...(actually about 4.2 lines - explained below)
I've already changed the minimum number of rows to 20, under 'Palette Behavior', under 'Quick Properties', 'Drafting Settings', and' Tools'.
I've closed and reopened Autocad several times since i've set this, but QP box will still not show more than 4 complete lines.
I've also gone to the CUI and changed the number of attributes i want to show for each different kind of entity, so i know it's not because i dont have enough lines to show....in fact, i can see a bit of the next line....i just can't drag the window any bigger!
How do I change the number of section views per row/column when using the create multiple section views command? It's defaulting to 8 per row.
View 9 Replies View RelatedIt seems to be set at 17 but I can't find a way to change it.
Autocad help is not useful at all as it says change the field to a user defined one, whilst not actually telling you how to do that.
How to change the number of decimal places of the elevation of points?
as the points are labeled with their elevations, I couldn’t find how the number of the decimal places of the elevation be chosen. In this case, I wanted to let the number of the decimal places to be zero.
How to set the number of the decimal places to be zero or 1, for example? how to sepcify it height (size)?
Screenshot below.
When we generate a gear pair using the design accelerator, the balloon from the drawing assembly only reflect one number instead of 2 different numbers. How can we change the number to reflect individual gears. Attached is the graphics.
View 1 Replies View RelatedThe defaul label style for the Elevation of points is set to 3 decimal places. We are trying to change the elevation display to 2 decimal places. We have tried the directions in the following discussion: [URL].......
Which is:
Toolspace
->Settings
-->Drawing name
--->Edit Drawing Settings
---->Ambient Settings
----->Elevation
------>Precision -> We modify from 3 to 2 decimal places.
It does not modify the display settings.
Also:
Toolspace
->Settings
-->Drawing
--->Point
---->Label Styles
----->(right-click) Edit label styles
------>Layout
------->Text
-------->Contents
--------->click on the "..." (three points) button
(Open "Text Component Editor - Contents"
--------->Select Point Elevation in the driop down list.
---------->Precision: Set to 0.01
------------>Ok, Apply, etc...
This does not seem to work either.
I am a Photoshop CC subscriber. Due to a hacker attack to your site, the card which I payed my subscription monthly was cancelled by the bank.So, I ask if it is possible to change my old card to a new one the bank gave me?
View 1 Replies View RelatedThe page numbers in the print module are beyond the edge of the prints my printer generates. Is there any way to change the location of the page number?
View 2 Replies View RelatedSo im working on this project were im modeling a ceiling, anyways I can not change or adjust the number of subds after i create the object. Lets say a create a simple cube with just 1x1x1 i can not change that after i created it... I just cant get to that menu when i click on the shape it only lets me rename it nothing else. Ive attached a screen shot.
View 3 Replies View RelatedIs it possible to change the Revision Number as starts from 0,1,2,....... in Revit Titleblock.
View 1 Replies View RelatedFor some reason I do not understand I cannot change the number of sides of a polygon by dubble clicking on the tool. For other tools (where you can change something) this is no problem and workes, but not for the polygon tool.
View 3 Replies View RelatedHow to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
When making numbers for the side of a race car for example, you want both the numbers to angle (lean) towards the back of the car. So on the left side of the car, the number is leaning to the right, and on the right side of the car the number is leaning left. How do you change the text to get the number to lean the way you want it too?
View 5 Replies View RelatedCurrently when I create a new layer within an image, and set the horizontal and vertical size using “inches” instead of “pixels,” and display the image at 100%, it shows 10 tick marks in the ruler to equal 1 inch.
I want rulers in my image to be scaled at 1/8”. Therefore, it should show 8 tick marks in the ruler with each tick mark (incremental unit) to represent the 1/8” scale. Example: 4 tick marks would equal ½”.
I have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
I've converted a 2D image into a smart object, dragged into a project then transformed it using the Distort command (similar to how you might distort a 2d image to make it sit inside a photo frame at an angle) . I need to then warp that image around over something that looks like a curved panel thats 2D but looks 3d. Its not a 3d object, but a rendered 2d image that just looks 3d.
I'm using the Transform > Warp tool as Puppet Warp isnt available after using Distort when using Smart objects.
Warp works fine to some extent but I could really do with more handles and smaler grid for more accurate warping rather than the default 3x3 grid & handles..
Possible to add more handles/ nodes/ control points (or whatever they'e called) and/ or increase grid points in the same way Puppet Warp does this so as I drag around I control a tigher & smaller space?