Photoshop :: Adjusting A Series Of Photos
Aug 15, 2005
I've got a series of photos (my wedding photos actually) that need color, contrast and brightness adjusting. The problem is that the photos were taken under a tree so the lightning was partly shady, partly bright and with different photos being shot at slightly different locations and positions I get hughly varying results when adjusting the photos individually.
way to adjust a series of photos so that the contrast, brightness, etc settings will turn out the same across a whole series of photos?
View 2 Replies
ADVERTISEMENT
May 30, 2013
I am redoing a series of photos using a specific set of layers and filters, it takes quite some time to open all the stuff for each photo. I sthere a way to automate all or part of this process?
View 1 Replies
View Related
Jul 16, 2013
We have a large project that we want to try reducing the DPI on the graphics. I am new to photoshop and wondered how to do it and if you can do it in a batch?
View 1 Replies
View Related
Jan 22, 2013
I am trying to standardize a series of photos, so that the distance between the eyes for each picture is 100 pixels. I can see the distance in pixels using the measuring tool, but when I try and scale the picture, the measuring tool disappears and I have to eyeball the distance. Is there a way to create a line or something between the eyes that I can then set the distance as 100 pixels to resize it? Or a way to see the distance in pixels while I scale the photo so I don't have to guess?
View 5 Replies
View Related
Nov 30, 2013
During 2014 I would like to create 'photo a day' video of myself, similar to this [URL] ........ I have no plans to inflict my work on the world via YouTube and the like, it is purely for my own amusement.
My question is a compositional/editing one. I understand how to take the stills and create a video from them using Windows Movie Maker, not the best software but sufficient for my purposes.
In the link above the young ladies eyes and nose stay at a (mostly) fixed point in the frame, I find this makes for a better video when all the stills are run together. The problem I have, is, when I take stills of myself my nose and eyes are at different positions frame to frame which makes for a rather jumpy end result.
Any tips on how to remedy this, is it done when taking the shot, or in editing afterwards? The shots are taken on a small point and shoot digital camera, as the shots will be taken at various locations etc I wont be able to have a static setup with a tripod and mark on the floor to ensure the same position each time. The method I have tried it just holding the camera out in front of me at arms length and trying to get the same height each time.
Is there a way to easily and quickly edit shots in Paint.NET so that the eyes and nose are at the same position in each frame for a series of photos, I'm not too bothered about all the frames being the same size or the edges lining up etc.
View 6 Replies
View Related
Nov 14, 2011
I am trying to adjust the color levels between two photos such that a certain object in both photos has the same color in both images. I'll try and explain more with an example...
I've got two images taken under similar lighting conditions with the same camera and settings that came out with slightly different colors. There is a reference object in each photo that should match (in this case, a grey square of a paint sample). I'd like to adjust the color of the square in photo 2 so that it matches the square in photo 1, with the adjustments applied to the entirety of photo 2.
View 5 Replies
View Related
Mar 1, 2012
I have VS X2 and I want to put some photos into a video I'm making.
I have video from a Panasonic PV-GS200 which gives a 24 bit, 720x480 AVI file. I have the Project Properties set to:
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 4:3, 29.97 fps
Lower Field First
DV Video Encoder -- type 1
And the Preferences for Image set to "Keep aspect ratio".
I have a small handbook from Ulead (from 2004 when I purchased video gear) which says that the pixel aspect ratio of DV is rectangular whereas the pixels in my photos are square. And this difference will cause photographs to become distorted as those square photo pixels are stretched to become rectangular pixels in the video.
My question is: do I need to crop my photograph correctly before I insert it into the timeline in VS X2, or is there an option/feature within VS which will handle this transformation for me?
Here is how the book says to crop photos:
for 720x480 NTSC-DV crop photos to 720x576
for 720x576 PAL-DV crop photos to 704x576
It further recommended using PNG file type for photos and to keep the image dimension (resolution) low, e.g. 720x576, in order to avoid artifacts in the video - only doubling the above crop dimensions if a pan & zoom filter are going to be employed. An image dimension of 720x576 seems really low to me but I am not used to working with video.
View 1 Replies
View Related
Aug 11, 2007
I'm wanting to do a series of photos. A row of three... If you need more description I can tell you more.
How can I do this in PS Elements 5? If anyone can help me with the process I will be in your debt.
View 2 Replies
View Related
Mar 30, 2012
I am having trouble getting my Civil3d line labels to adjust with the annotative scale.
View 4 Replies
View Related
Dec 21, 2012
I will test Photoshop CS 6 in my Windows x64 System. First I´ve got a Matrox P690 graphic card, but it won´t run with OpenGL 2.0. So I bought a new MATROX M9120 Plus x1 card in hope it will work fine with Photoshop. But the GPU OpenGL with rotation tool or other things won´t work, because the card seems to be not verified by Photoshop CS6. The drivers are the newest WDDM certified Matrox drivers from December 2012.
Some infos from my system:
Windows 7 Ultimate 64bit
16GB RAM
2x Intel Quadcore XEON CPU
Matrox M9120 Plus PCIe x1
Supermicro X7DBE motherboard
View 1 Replies
View Related
Jul 3, 2013
How can I run Flash player on Photoshop video series (CS5 Extended)?
View 1 Replies
View Related
Jul 25, 2011
you know if it's possible to scale a image in differente sizes automatic. f.e. I have a image 1200x2000 an I would like to get 3 new images like 800x1000, 500x700 and 350x500 AUTOMATIC and without programming. It would be possibe with photoshop?
View 1 Replies
View Related
Sep 13, 2008
I am thinking about buying an M9125 card from the new range of Matrox M series cards.
I have tried without success to find a review of this series and of the card I am interested in particular. Nor can I find any mention of it or its performance in a user forum anywhere. My display is a NEC2690 (26") running at a resolution of 1920x1200. I don't game and just want a new card for PS and Corel Painter work. I have CS3 and will probably move to CS4 idc.
View 3 Replies
View Related
Sep 23, 2012
All the videos on CS 6 video editing show how to trim the ends off a video but they don't show how to cut a sequence of frames from within the video. I might also like to copy a series of frames from one video and insert them at a point in the middle of another video.
View 4 Replies
View Related
Apr 26, 2013
I'm having a lot of glitchy problems with Photoshop CS6. I believe it's because of the graphics card. The image keeps disappearing and reappearing as I make adjustments, the Waccom table controls (for sizing brushes) suddenly stops working. When I touch the Waccom pen to tablet the cursor turns into a spinning tarus. I reboot, and it's OK for a little while, then starts acting up again. I've changed the Graphics Processor Settings from Advanced, to Normal, to Basic. Same problem no matter what.
I'm running on Windows 8. Intel i5 processors. The program is loaded on an SSD drive. The scratch disk is 3 TB so it shouldn't be a memory/space issue. The card driver is up to date.
View 3 Replies
View Related
Jun 6, 2009
I want to place text in the bottom right of a series of images. The problem is not all images are the same size. Some are verticle and some are horizontal and even those arent all the same size. However, 99% are 768 high. How do I specify a certain margin from right and bottom so I can use the text action on all images regardless of image width?
View 3 Replies
View Related
Jun 21, 2006
how do i edit a series of pictures in which i want the same affect applied to each picture in the series? the answer that was given was: apply all the affects you want to your picture and record that as a batch action and use that action to apply to the remaining series.
View 1 Replies
View Related
Jan 3, 2013
How do I use Photoshop Elements 11 to create an animation from a series of drawings?
View 1 Replies
View Related
Mar 4, 2013
I'm trying to create a street elevation using a series of screen shots taken from Google maps. Here an image of the type of thing I'm trying to achieve:
You'll noties that the image is flat.. Is this something I can achieve using the perspective tool? If so, do I change the perspective of all the individual images and then merge them? Or do I merge them, and then change the perspective in sections?
View 1 Replies
View Related
Nov 16, 2012
I have a Photoshop CS6 document with 20-some adjustment layers and would like to be able to apply their effect to multiple image files. I'm looking for a way to convert the series of adjustment layers into a single action so that I can batch process a set of images. Can this be done?
Unless I'm missing something, it appears that no trivial solution exisits. For example, there's no option that allows for selecting the adjustment layers, right clicking them, and choosing 'convert to action.' What I want to avoid is having to redo each adjustment layer just for the sake of recording an action.
Also, I understand that I can always "place" (i.e. drag and drop) the image requiring processing into the Photoshop document containing the adjustment layers, saving a merged copy as jpeg, and repeat... but such a manual method would border on insulting to this prowess of a program.
Any method of recording an action that can make use of the document with the adjustment layers and a variable document that will be passed through during the batch process.
View 2 Replies
View Related
Sep 24, 2013
I have a job to photograph 300 items and use lightroom to number each one with its own product code.
Then I need to add the barcodes to the images so the client can scan them
They have a spread sheet with all the data on but can a sript be written to do this action ???
View 2 Replies
View Related
Apr 26, 2007
I am looking for an action or preferably a way to create one, that takes a GIF file with multiple images (=animation) and puts all images side by side and saves it.
View 9 Replies
View Related
Aug 18, 2013
I am trying to print a doc 60cm x 23cm but my printer will only accept A4 paper. I am happy to have this printed over a few sheets but even using the custom print options for paper and print sizes I am only able to print one section of the picture. How I can print a series from the picture so I can paste up afterwards?
View 1 Replies
View Related
Feb 27, 2012
I loaded Photoshop 10 and then imported/moved my catalogs from Photoshop 6. They are all scrambled - do not honor import dates/sequence and have dates and file names all intermingled. It is really a screwed up mess. I haven't found a way to unscrew it! - Or tell me I get to live with it!
View 5 Replies
View Related
Mar 10, 2013
I'm not a neither a novice nor a pro when it comes to Photoshop. (Just somewhere in-between) . . . So don't understand why I''m suddenly having problems with colors in my photos looking accurate on my camera, but almost completely red and yellow in Photoshop. Initially though the camera was at fault, until I switched cameras and still had the same problem, so figured it must be Photoshop.
Since Photoshop CS2 has all the features I need, I've never bothered to upgrade. . . which turned out to be a problem when I tried to follow the instructions for creating new adjustment layers. (Was OK until I reached the last step, when my menus were different than those in the guide.) Have spent most of the last 2 days trying to manipulate all the options under the Image Adjustment menu, but am running our of patience and luck.
View 7 Replies
View Related
Jul 10, 2004
"Adjusting tsume
Tsume reduces the space around a character by a specified percentage value. As a result, the character itself is not stretched or squeezed. Instead, the space between the character's bounding box and the em box is compressed. When tsume is added to a character, spacing around both sides of the character is reduced by an equal percentage.
To reduce spacing between characters:
Select the characters you want to adjust.
In the Character palette, enter or select a percentage for Tsume . The greater the percentage, the tighter the compression between characters. At 100% (the maximum value), there is no space between the character's bounding box and its em box."
And this is what the icon looks like.
I have selected the text. But in the Character Palette, I just dont see it or cant find it.
View 2 Replies
View Related
May 28, 2008
I have a background layer in Photoshop (CS2) that needs to be converted to a spot color. I have tried to select the channels and adjust them that way (yes, the entire image needs to be all the same color, with lighter and darker highlights and shadows), but can't seem to adjust them just be selecting them.
View 1 Replies
View Related
May 1, 2004
had something to do with photoshop) where you'd follow 4 or 5 steps to correctly adjust your monitor to the right brightness and such. i remember one of the steps was 2 grey boxes and you had to adjust till they blended together.
View 3 Replies
View Related
Dec 22, 2003
is it possible to adjust the greyscale so there is a little color in the photo?
View 2 Replies
View Related
Aug 31, 2012
I started noticing this problem a while back in CS5 and it seems to be ongoing in CS6. When I have a group of rows open in ACR, I can make adjustments as normal. Lets say that I have a bracket of images I shot of 10 frames.
I make adjustments on the ones I want to use, rate them and use the "select rated" button. If one of those images has a different color balance than the others, it will auto adjust it to match the rest. If the image that is viewable is the one with the different color balance, it will auto adjust the rest of them.
View 6 Replies
View Related
Jul 19, 2012
How do I get the handles to appear on the actual image for adjusting a colour and transparency gradient?
I know how to adjust a gradient in the gradient editor, but I need to adjust the position of the colours and the transparency bands on the actual image. what I clicked in the tools pallette to get the handles to appear.
View 12 Replies
View Related
