Photoshop :: How To Stop ACR From Adjusting Color
Aug 31, 2012
I started noticing this problem a while back in CS5 and it seems to be ongoing in CS6. When I have a group of rows open in ACR, I can make adjustments as normal. Lets say that I have a bracket of images I shot of 10 frames.
I make adjustments on the ones I want to use, rate them and use the "select rated" button. If one of those images has a different color balance than the others, it will auto adjust it to match the rest. If the image that is viewable is the one with the different color balance, it will auto adjust the rest of them.
View 6 Replies
ADVERTISEMENT
Aug 31, 2012
it took some effort, and i dont remember all of what i did, but i finally got bridge to stop making auto adjustments on my raw images--though it still does if i zoom in when im full screened.
Â
regardless, when i open a raw image in photoshop, it makes auto adjustments (and they are always hooorriblee).
-all the boxes under default settings are unchecked
- i select 'as shot' for white balance,
and so on; but without fail, every time it makes these ugly over saturated over contrasty or otherwise hideous versions of my images.
Â
im not buying the whole 'digital negative' deal. i can see a full view images of my nondestroyed raw image, and seriously there needs to be a point to all the work i do on set to to get the right light and colors, and so on... im about to reinstall photoshop.
Â
if i dedicate a lot of time, effort, and frustration, i can get them close to what they were, but its so impractical and frustrated to input this additional time for work.
View 9 Replies
View Related
Jan 8, 2013
Adjusting color backgrounds. I have a large number of images of fly-fishing flies which were photographed on not-quite-solid backgrounds of slightly differing colors. I'd like to efficiently adjust the backgrounds so they all appear roughly the same without affecting the flies themselves. The flies are hard to select because of their feathery, hair-like edges, and the backgrounds are hard to select because they have slight gradations of almost-solid colors.
View 6 Replies
View Related
Sep 8, 2012
I am trying to adjust the color of a layer by going to "image" then "adjust", and whenever I try to mess around with something nothing happens.
View 2 Replies
View Related
Aug 2, 2012
I have a duotone image (warm grey and black) as an eps in photosho linked to Illustrator file. I need to be able to adjust each color as needed in photoshop. It is already setup as a duotone image and correctly separates in illustrator. I can do overall adjustments as needed but I would like to be able to throw a curve/adjust each color on it's own as needed in photoshop, and then relink.
Â
OS MAc SnowLeopard, CS5.
View 2 Replies
View Related
Feb 8, 2007
First off, I didn't know if I should post here or in the 'General Photoshop Discussion' forum. I don't really have a question as to 'how an image was made' [more like: how I can do it] but I do see many such questions asked in this section, so that’s where I posted.
Anyway, my question is what techniques/tools can I use to get the coloring on her nose to match that of the rest of her face? [she'd been crying ] I thought the 'Healing Brush Tool' might be useful but when I tried that, it didn't go well!
View 7 Replies
View Related
Feb 20, 2013
I have to change the color of orange and how to light it.
View 2 Replies
View Related
Jul 17, 2006
I want to adjust the colors in this image so that "Red" is red, "Blue" is blue, etc:
(I have a larger version of the image that I am using,)
View 1 Replies
View Related
Mar 30, 2012
I am having trouble getting my Civil3d line labels to adjust with the annotative scale.Â
View 4 Replies
View Related
Nov 14, 2011
I am trying to adjust the color levels between two photos such that a certain object in both photos has the same color in both images. I'll try and explain more with an example...
I've got two images taken under similar lighting conditions with the same camera and settings that came out with slightly different colors. There is a reference object in each photo that should match (in this case, a grey square of a paint sample). I'd like to adjust the color of the square in photo 2 so that it matches the square in photo 1, with the adjustments applied to the entirety of photo 2.
View 5 Replies
View Related
Jul 26, 2013
Adjust the color calibration for camera?
View 3 Replies
View Related
Jul 23, 2011
I take a lot of underwater pictures usually quite badly . I am looking for adjusting the color levels.
I am guessing I have to create layers to adjust them properly as just fiddling with the Red on the main image isn't really giving me great results.
View 5 Replies
View Related
Oct 4, 2013
What I'd like to do is adjust the color and brightness/contrast of many layers of an animation. Now, for a still image with many layers I know you can generally add a partially transparent layer over the whole thing, however, since it's an animated .gif I have to do the same thing to each individual layer. I could probably go through and do it by hand and just get it over with. But, I'm curious if there's a feature for this, or is there a plugin that can repeat actions for multiple layers?
View 1 Replies
View Related
May 30, 2013
In CS6 Illustrator, when I click on fill or stroke color, the color panel opens automatically. How do I turn off this "feature"?
View 4 Replies
View Related
Mar 10, 2013
I'm not a neither a novice nor a pro when it comes to Photoshop. (Just somewhere in-between) . . . So don't understand why I''m suddenly having problems with colors in my photos looking accurate on my camera, but almost completely red and yellow in Photoshop. Initially though the camera was at fault, until I switched cameras and still had the same problem, so figured it must be Photoshop.
Â
Since Photoshop CS2 has all the features I need, I've never bothered to upgrade. . . which turned out to be a problem when I tried to follow the instructions for creating new adjustment layers. (Was OK until I reached the last step, when my menus were different than those in the guide.) Have spent most of the last 2 days trying to manipulate all the options under the Image Adjustment menu, but am running our of patience and luck.
View 7 Replies
View Related
Jul 10, 2004
"Adjusting tsume
Tsume reduces the space around a character by a specified percentage value. As a result, the character itself is not stretched or squeezed. Instead, the space between the character's bounding box and the em box is compressed. When tsume is added to a character, spacing around both sides of the character is reduced by an equal percentage.
To reduce spacing between characters:
Select the characters you want to adjust.
In the Character palette, enter or select a percentage for Tsume . The greater the percentage, the tighter the compression between characters. At 100% (the maximum value), there is no space between the character's bounding box and its em box."
And this is what the icon looks like.
I have selected the text. But in the Character Palette, I just dont see it or cant find it.
View 2 Replies
View Related
May 28, 2008
I have a background layer in Photoshop (CS2) that needs to be converted to a spot color. I have tried to select the channels and adjust them that way (yes, the entire image needs to be all the same color, with lighter and darker highlights and shadows), but can't seem to adjust them just be selecting them.
View 1 Replies
View Related
May 1, 2004
had something to do with photoshop) where you'd follow 4 or 5 steps to correctly adjust your monitor to the right brightness and such. i remember one of the steps was 2 grey boxes and you had to adjust till they blended together.
View 3 Replies
View Related
Dec 22, 2003
is it possible to adjust the greyscale so there is a little color in the photo?
View 2 Replies
View Related
Jul 16, 2013
We have a large project that we want to try reducing the DPI on the graphics. I am new to photoshop and wondered how to do it and if you can do it in a batch?
View 1 Replies
View Related
Jul 19, 2012
How do I get the handles to appear on the actual image for adjusting a colour and transparency gradient?
Â
I know how to adjust a gradient in the gradient editor, but I need to adjust the position of the colours and the transparency bands on the actual image. what I clicked in the tools pallette to get the handles to appear.
View 12 Replies
View Related
Sep 22, 2013
Black screen when adjusting anything in Photoshop cc. Windows 8.
View 3 Replies
View Related
May 2, 2013
I have a 3d render that has some semi transparent areas (shadows on matte objects) I want to get rid off. In AE a can simple adjust the alpha levels and set everything under 25 to be 0 for example.
Â
In PS the entire alpha channel seems to be out of reach.. it's not in the Channels tab? I can add one but PS fills it with an B&W version of my RGB image.. What trick I'm a missing here?
View 18 Replies
View Related
Mar 10, 2012
discovered the pleasures of Edit>Convert to Profile command. When I convert to a new profile (I have belatedly discovered paper profiles) from adobe RGB to Hahnelmule Photorag to be precise there is a loss of saturation I am having trouble recovering. I will avoid this problem by starting with the correct profile however I have a lot of work in the wrong profile. To keep things simple I have flattened the image.
View 12 Replies
View Related
Feb 28, 2012
Using a Hue/Saturation Adjustment layer:
Â
1. Do you ideally want to go through and adjust Reds, Yellows, greens, Cyans, Magentas individually? Are final results not as good if you just adjust the Master by itself?
2. Looking at my imgage, I do not see any blues, however, when I adjust the hue slide while having blue selected, I see some slight changes to my image. I'm guessing that this means that there are some slight blues in the image.
Would you just leave the blues alone in a situation like this, or is there some graph that you use to make changes even if you do not see the colors in the actual image?
View 7 Replies
View Related
Dec 27, 2012
I recently purchased a new computer and uploaded my creative cloud membership onto it (inspiron 15 for school). When I make any sort of adjustment to anything at all (i.e. selective color, brightness/contrast, curves...) the image flashes or flutters its saturation or tone value as I am adjusting anything. I never had this problem with computers that were way worse, so whats going on? I tried both 64bit and 32 but no such luck. It makes it extremly difficult to see anything I am doing to a photo.
View 3 Replies
View Related
Jul 2, 2008
a grayscale scan of a line drawing with small text. The lines and text, which should be black, are gray. And the background, which should be white, is a light gray.
The lines should be 100% black, but I'll take what I can get. I fiddled with curves and contrast and stuff, but when I'd get the background adjusted so it was completely white, then the lines weren't dark enough.
And of course converting to a bi-level bitmap made the lines and text all pixelly
this will be offset printed, so it needs to be high resolution.
View 4 Replies
View Related
Jan 27, 2009
I made the switch from Studio 8 to CS4 not too long ago, and have been learning CS4 for a while. But I'm having a problem that's holding me back. How do I adjust the hexadecimal code (i.e. #e8e8e2) manually? I see no place to insert your code, and I kind of need that for doing web design.
View 5 Replies
View Related
Feb 6, 2005
I have a problem with a couple of photos that I want to stitch
for a panoramic.
The picture I have attached shows how one or both of the images
need adjusting so that their exposures 'match'
View 4 Replies
View Related
Aug 15, 2005
I've got a series of photos (my wedding photos actually) that need color, contrast and brightness adjusting. The problem is that the photos were taken under a tree so the lightning was partly shady, partly bright and with different photos being shot at slightly different locations and positions I get hughly varying results when adjusting the photos individually.
way to adjust a series of photos so that the contrast, brightness, etc settings will turn out the same across a whole series of photos?
View 2 Replies
View Related
Dec 6, 2006
Is there any way to open multiple files in Photoshop and execute an adjustment, such as Unsharp Mask, and have all the open files reflect that adjustment?
View 1 Replies
View Related
