Photoshop :: ACR - Move Image Around Screen To Look At Different Part?
Nov 25, 2012
currently using PS5 and recently updated to PS6. In both versions i have an issue with ACR.More often than not, when processing a raw file, if i apply any noise reduction (ie move the luminance amount slider from 0) the zoom stops functioning preventing me zooming in or out. Some times this is acompanied by the image "stuttering" if i move the image around the screen to look at a different part.
When i open an image in ACR and convert to tiff in PS the first time i use the program all is well, but if i then go back to ACR and open another image i often find that the ACR screen comes up minus the actual image. The window which should contain the image shows PS underneath. Im currently using windows 7. I often get an error message when trying to open a raw file stating "not enough RAM". Is the ram (or lack of) responsible for all of these issues?
View 1 Replies
ADVERTISEMENT
Dec 17, 2007
I have recently replaced my PC. Windows Pro with all current updates. I use Photoshop CS3.
Sometimes when I put the cursor on the blue bar at the top of an open PS image it doesn't move around my screen when I drag the mouse. Other times it works OK after a few stutters. It was always OK on my previous PC.
View 12 Replies
View Related
Aug 24, 2011
I've run into Paint.NET a few weeks ago. I think it's a very good choice for beginners (and maybe professionals too) at a graphic field. I've made some cool pictures (with some cool plugins inside Paint.NET or published at the forum) and now I wanna to make my own plugin.
The question is how to move and rotate a specific part of image at source canvas. The rest of the image must be untouched. I consider it's impossible to use Layers -> Rotate/Zoom tool directly (correct me if I'm wrong). So I should use a piece of C# code. I think source code of Rotate/Zoom tool would be very useful too but I couldn't find it.
View 4 Replies
View Related
Jan 1, 2012
I wasn't really sure how to put that into a title, but yeah. I'm sure it's pretty easy to figure out, but I just don't really feel like it.. I basically mean, how do you select a part of an image and move it onto another one without it being on top of the other image?
View 1 Replies
View Related
Feb 25, 2007
If I drop a layer so that part of it is off the canvas, the layer will move back to the place that i dragged it from.
Is there any way to move a layer so that part of it is outside of the canvas?
View 9 Replies
View Related
Mar 29, 2012
When I move a canvas around the screen, if I take it too near the top it will snap to the top of the screen and take up the whole page with just this one canvas. How do I stop it from doing this? I guess its in options somewhere but as I dont know what its called I dont know what to search for? Also how do I stop one canvas snapping into another/tabbing into another when moving them around?
View 1 Replies
View Related
Mar 9, 2013
I just bought a seconf monitor to move all tools and windows to the seconf screen. I want my picture alone on the main screen. It seems that PSE 11 won't allow me to do that.
View 1 Replies
View Related
Jan 29, 2013
As it does in Windows file hierarchy. also how can i create a new file/folder to put other files/folders into.
Example....move file named "red roses" into newly created file named "Flowers". There doesnt deem to be a drag n drop ability.
View 6 Replies
View Related
Jul 16, 2012
I need to cut a part of one path and paste it as a part of another path. Is there a way in GIMP for doing this? Currenty, all what I can do is to select required anchors of the source path. Then, all I can do with this selection is moving it as a whole. The commands "Copy path" and "Paste path" ignore selection and work with entire path.
View 2 Replies
View Related
Dec 13, 2012
I'm trying to get text to scroll across the screen full height coming from the right to left, scroll across the screen at certain times of the video. I saw some animation presets there for text but not what I'm looking for. What I'm trying to do: along with a song, every time the name of the song comes up in the chorus, I'd like to scroll those words across the full height of the video as an overlay. And if it was just a graphic instead of text going across, what would I use to achieve that?
View 5 Replies
View Related
Mar 19, 2012
When you zoom into the picture that's being edited, scrollbars appear but you can scroll only to the edge of the picture, pixel in pixel this way it's pretty hard to capture the edges with selection
How to add a free space to all sides so it will be possible to move edges of the picture to the center of the screen and work with them easily?
View 2 Replies
View Related
Sep 18, 2013
I have an assembly that I just want to costrain 2 faces and then slide it into place to see how it will fit....But it will not pass through the other parts.[URL]
View 2 Replies
View Related
May 10, 2013
I'm currently designing a frame for a geodesic dome. I have created a wireframe from an excel sheet (I calculated the vertices in a c# program) and added this to my 5-edges-corner part as derived part.
I used the wireframe to create the part that can be seen in the attached picture (basically its a 5 sided cylinder and i used layers which i generated from the wireframe to cut away the top bits).
Now because the wireframe has its origin in the WCS origin, the part isn't centered in the WCS. If I use the "move body" tool to move the part, the layer that creates the cut is not moved as well and the cuts disappear. Also the rotation is kinda messed up.
My first idea was to define a UCS and use that to replace the WCS but apparently, that's not possible in Inventor 2014.
I would like to know, whether there is a way to make the cuts permanent and independent of the layer (which is dependent on the wireframe which i want to delete anyways as soon the part is done). And what the best way would be to move the part to the WCS origin.
PS: The screenshot is all in german.
View 8 Replies
View Related
Jan 9, 2012
I am on X4 and go back years with the program. I thought there was a feature to select only a part of the screen and be able to zoom on that on playback in the project. was this in an earlier version? I cannot find this feature in X4. I know I can do this for an image but want to do it for close ups in videos.
View 4 Replies
View Related
Oct 26, 2013
I do a lot of screen captures mostly using Vdub to move frame by frame when I want a screencap. I don't get any problem with vdub but when I use other programs like MPC HC or sometimes even in WMP, the size dimensions sometimes gets captured with the image like this:
It gets quite annoying because I have to recapture the frame again and try different techniques to get it without the box or size dimensions showing up in the capture.I'm using Corel PSP x4 to do my screen captures. How to capture clearly without those box dimensions getting in the way?
View 8 Replies
View Related
Mar 14, 2012
Using Inventor 2012
I have parts inported from stp-files, now the coordinate system is different in all these parts.
How do I re-define the coordinate system to my needs in these imported parts.
View 6 Replies
View Related
May 13, 2013
I have changed the horizontal aligment.
As there is not any auto-update tool (or I dont see) I need to displace the profile 123,46 meters from 1021.27 stattion.
View 9 Replies
View Related
Jan 16, 2009
For some reason, now when I click on Constrained Orbit or Free Orbit the screen automatically starts to move, its like I have just pressed on Continuous Orbit. Free Orbit works OK if I hold shift and use the scroll button, but I am used to using the icon .
View 2 Replies
View Related
Jul 12, 2013
In my sketch I want to move a smaller circle that is within a circle along the Z-axis. I've put the image below to avoid confusion. I am using Inventor 2012.
View 3 Replies
View Related
Jan 30, 2013
I have finished all my parts and now i have to assemble them. I normally just use the constrain tools, but this time i need to set a part in mid air. I would like to use the move tool, but with exact xyz coordinates. I only seem to be able to do that with an UCS (coordinate system), not the part itself. I guess it's just a button i'm missing somewhere.
View 2 Replies
View Related
May 8, 2013
Working in an assembly with sub-assemblies. I am trying to move a part not much more than the diameter or a hair, but this is causing lots of problems.
I am forced into editting an assy constraint. So I go thru the menu and except the edit.
Constraint box opens / and iventor says "ready" but it will not let me select and surfaces to define the mating.
My question is What is it the constraint is ready for?
View 1 Replies
View Related
Oct 17, 2013
Is it possible to move a part in CC when it "landed" in the wrong category/folder?
- - looking for some kind of explorer type drag & drop instead of re-publishing.
se attched jpg, which shows what I mean.
View 9 Replies
View Related
Oct 4, 2012
I have two set of chain drives connected to each other through a common axle. The motor (which is not visible in my assembly) drives the yellow sprocket.
The two sprockets mounted on the grey axle is attached with a key way so when the yellow sprocket turns, the two chain drives turns.
I want to attach the blue sled on the blue chain, the red sled on the red chain and then rotate the yellow sprocket so both of the sleds moves with their chains (at the same speed/ time).
The blue sled is going to move a rolled bar (the orange one) on the floor (glass square) a certain length and then the red sled is going to "take over" and continue to move the bar on the floor.
I want to make sure I´ve got the spacing between the sprockets in the short chain drive (red) correct so the red sled takes over when the blue sled disappears under the floor.
[URL].....
[URL].....
[URL].......
[URL].......
Edit: I use IV 2012, but I also downloaded IV 2013 professional (trial) so I can use the dynamic motion.
View 3 Replies
View Related
Mar 21, 2013
I noticed when creating assemblies, applying a positional constraint, the parts don't move. In order to get the parts to "move" to their constrained position I have to try and drag them with the mouse then they snap into place. Also updating the assembly works as well.
What setting could I have changed so that once I press apply on a constraint it moves the part immediately?
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 5 Replies
View Related
Feb 23, 2008
I am working on the following image but the image that I'm working with on the screen is not the same as the output after I save it. What is happening and how can I fix this?
(the images have been reduced in size and quality so this is for illustration only)
View 3 Replies
View Related
Sep 15, 2013
I`ve just installed Inventor student and I can`t use it at all since I can not see anything in the main screen! I`ve installed, reinstalled and nothing
I`ve attached two screen shots - hovering over the main screen I get the options and data showing like the correct thing is happening - just nothing visible!
View 1 Replies
View Related
Jul 25, 2012
I am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies
View Related
Apr 4, 2012
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
View 2 Replies
View Related
Dec 29, 2011
I was just wondering as to whether its possible to keep the checkered base which you get when you remove part of an image or have it transparent to stay in the created image.
I am sure you all know this.
Here is the YouTube background which I have created and wondering if I am able to keep the checkered base or whatever in the image after I have saved it rather than print screening and pasting it back like a jigsaw puzzle.
View 6 Replies
View Related
May 2, 2013
I have attached and image to a surface of a part and when I bring it back to AutoCad I can not see the image.
View 1 Replies
View Related
Nov 25, 2013
I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
View 6 Replies
View Related
