I have recently replaced my PC. Windows Pro with all current updates. I use Photoshop CS3.
Sometimes when I put the cursor on the blue bar at the top of an open PS image it doesn't move around my screen when I drag the mouse. Other times it works OK after a few stutters. It was always OK on my previous PC.
currently using PS5 and recently updated to PS6. In both versions i have an issue with ACR.More often than not, when processing a raw file, if i apply any noise reduction (ie move the luminance amount slider from 0) the zoom stops functioning preventing me zooming in or out. Some times this is acompanied by the image "stuttering" if i move the image around the screen to look at a different part.
When i open an image in ACR and convert to tiff in PS the first time i use the program all is well, but if i then go back to ACR and open another image i often find that the ACR screen comes up minus the actual image. The window which should contain the image shows PS underneath. Im currently using windows 7. I often get an error message when trying to open a raw file stating "not enough RAM". Is the ram (or lack of) responsible for all of these issues?
I purchased Photoshop Extended Student version for Windows six months ago. This week I have just changed my computer system to an iMac.
Can I transfer my license from Windows to Mac? Will it cost anything? If so how do I go about making the change?
I downloaded Photoshop CS3 and run the installer. After it extracted some part of installator files it displays extraction error, so the installator placed on the ADOBE.COM web site is corrupted. Where to find correct one?
View 10 Replies View RelatedI constantly create multi-languaged leaflets within InDesign CS5 and the one thing I often find is that I constantly have to revisit the entire document to prevent widows (or orphans - whatever you call them) at the end of a paragraph.
Is there a way to setup within my paragraph style to prevent, lets say, anything less then 10 characters at the end of the paragraph?
I am aware of using the White-Space non break command, but the amount of text I have to visit I wondered if it could be setup in the first instance and prevent widows appearing at the end of a paragraph.
When I move a canvas around the screen, if I take it too near the top it will snap to the top of the screen and take up the whole page with just this one canvas. How do I stop it from doing this? I guess its in options somewhere but as I dont know what its called I dont know what to search for? Also how do I stop one canvas snapping into another/tabbing into another when moving them around?
View 1 Replies View RelatedI just bought a seconf monitor to move all tools and windows to the seconf screen. I want my picture alone on the main screen. It seems that PSE 11 won't allow me to do that.
View 1 Replies View RelatedAcad Architecture 2011,
I've created a plot style setting Black lwt. Stb ( style 1) in my table setting . I've set my plot style in my layers to this setting. In my plot setup I've selected this setting. Have the transperancy setting checked and all others uncheck so my line weights appear nice and thin but everything plots color in my pdf.
I've matched my " plot style" in my properties after selecting various walls, windows, doors and etc in properties . Yet I still get color. Particulary with all default hatches ( cmu wall ) The only thing I've done that works is Select wall> right click> Edit wall Style and then changed the style over rides. This involved selecting different hatches and etc. This works but seems excessive for something that should be simple. What am I missing here. My standard 2d items and even 3d drawings of something like a hinge.I don't encounter this.
I'm trying to get text to scroll across the screen full height coming from the right to left, scroll across the screen at certain times of the video. I saw some animation presets there for text but not what I'm looking for. What I'm trying to do: along with a song, every time the name of the song comes up in the chorus, I'd like to scroll those words across the full height of the video as an overlay. And if it was just a graphic instead of text going across, what would I use to achieve that?
View 5 Replies View RelatedWhen you zoom into the picture that's being edited, scrollbars appear but you can scroll only to the edge of the picture, pixel in pixel this way it's pretty hard to capture the edges with selection
How to add a free space to all sides so it will be possible to move edges of the picture to the center of the screen and work with them easily?
I do a lot of screen captures mostly using Vdub to move frame by frame when I want a screencap. I don't get any problem with vdub but when I use other programs like MPC HC or sometimes even in WMP, the size dimensions sometimes gets captured with the image like this:
It gets quite annoying because I have to recapture the frame again and try different techniques to get it without the box or size dimensions showing up in the capture.I'm using Corel PSP x4 to do my screen captures. How to capture clearly without those box dimensions getting in the way?
For some reason, now when I click on Constrained Orbit or Free Orbit the screen automatically starts to move, its like I have just pressed on Continuous Orbit. Free Orbit works OK if I hold shift and use the scroll button, but I am used to using the icon .
View 2 Replies View RelatedI am working on the following image but the image that I'm working with on the screen is not the same as the output after I save it. What is happening and how can I fix this?
(the images have been reduced in size and quality so this is for illustration only)
I am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies View RelatedI opened the image I want to work on and the top of it is behind the top of the photoshop icon... if I click on the image, the top of the image (needed to move it down) disappears, if I click on the desktop, the image is there without photoshop. I can't move the image down to work on it, what do I do?
View 1 Replies View RelatedHow can I select an image that is behind another without having to move the image in-front but simply selecting the one behind?
View 6 Replies View RelatedI am having issues moving and resizing a image once it has been "placed" onto the document. It seems to be locked and even when I agree to place the image, I can still not move or resize it. This happens on all file types and CS6.
View 1 Replies View RelatedThere seems to be a bug in both Windows and Mac versions of Photoshop CS6. The problem manifests itself MUCH clearer on a Windows machine, but is present to some degree on a Mac, too. The last version without it seems to be CS3 (OpenSth problem?).
Steps to reproduce: Any image open, full screen mode, all pannels UNDOCKED: Correct behoviour: The image should not move while pressing Tab (ideally it shouldn't even redraw).
On Windows:
With every press of a Tab key to show/hide the panels the image jumps up several pixels (sometimes also towards the center of the screen if the image is smaller than the screen area). Also (and MUCH more annoyingly) when the image is moved off center and is at certain magnification (the most reproducible seems to be 33%) after pressing Tab it jumps ALL THE WAY to the center of the screen.
On Mac:
Similar things happen, but more rarely, and the image jumps by only ~1 pixel. (Easier to observe if you first zoom the image smoothly a bit by dragging with a zoom tool).
Also as it currently is (after CS3?) pressing F produces the same outcome as pressing Shift+F - there is no way of just showing the menu in Fullscreen mode and then quickly hiding it after use - one have to go through the whole screen mode cycle. Also on Windows there is no way to access the menu when hidden with Alt + Letter speedkey (Alt + F for file menu etc.). Both these functions worked perfectly well in CS3.
Both machines have latest Photoshop, OS updates and drivers (but old graphics cards: Win - Nvidia 9800GT, Mac Nvidia 880GT). I suspect these changes for the worse has been introduced while switching to OpenGL. Hopefully it is not necessary for it to be that way or maybe even it works as expected on newer graphics hardware.
Last time similar problems occured was, if I remember correctly, in Photoshop 7 when Status Bar has been moved into an image window :-) I know it may sound as if it's not important, but it certainly is annoying. It has nothing to do with not embracing change - I do find OpenWhatever to be a huge leap for Photoshop - even if I have to put up with a slower image redraw most of the time..
I need to move a portion of a jpeg image (a logo) a little bit to one side, then I will fill in the empty space. Do I need to save it as a .psd first? And which tool do I use?
I was trying to use one tool, not sure which one, and it told me the layer was locked. I couldn't figure out how to unlock the layer.
I'm trying to create an animated image, but when I choose the option "jump to Image Ready", I get the following message: Could not fully start the application because a program error has occurred. However, the last time I tried to move to Image Ready (I haven't done so often; I don't use either Photoshop or IR very often),
View 1 Replies View RelatedI'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View RelatedI try to select and move a layer using the Move Tool, another layer is immediately selected and moved instead.
Also, if I have layers inside a folder and try to move one of those layers, the entire folder is selected and all layers within that folder move.
I have not grouped any layers together.
I'm using Mac OS 10.4.8 with PS 9.0.1
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I have been using some tools successfully, but now when I try to use the Healing, Tool, Patch, Type and some others, the image drops off the screen as soon as I place the tool onto the screen. Then I cannot work on the image.
View 2 Replies View RelatedFor no apparent reason, some of the images on my computer screen are coming up in odd, bright colors similar to a negative, but not complete. It happens to images I open on independent web sites and images stored on my computer.
When I open some images in Photoshop5, it asks if I want to discard the embedded profile. If I answer yes, the image displays fine. If I answer No, the image colors are distorted. This problem persists on my laptop screen and on the monitor attached to laptop.
I need to silkscreen an image, but can only do one solid color at a time. I'll have a black t-shirt, so that's one color, then red, green, pink and silver to screen onto the shirt. I can only do a max of 4 colors on one background.
here's the image: [URL].......the link is missing the http : // because I'm a new member and can't post links yet :/
How to break this down into 5 cells of color in Photoshop (CS4)? Then I can silkscreen it.
When I select to resize an image the box that opens has drifted off my screen, and it has slowly risen upward more and more. I noticed this about 2 weeks ago and couldnt grab the top bar to bring it down as it was already out of sight. Now everytime I go to resize something it drifts a tad farther, and a tad farther until now it's virtually impossible to see anything and I've been using the blind tab method for making adjustments.
Below are some pictures to demonstrate what exactly is happening. The first one shows where I'm going to select what, the second shows where the box is after it opens.
The third shows me picking a color, and the fourth shows how this problem has spread to that box as well.
(URL address blocked: See forum rules)
I recently upgraded to PS-CS4 from CS3 and notice that I can only view one image on my screen. Is there a way to view more than one image on the screen at the same time? I cannot seem to find a way to change this feature.
View 4 Replies View RelatedDownloaded photoshopCS 5.1 for windows an when I open up a project an uses the move tool it will not let me manipulate the image
View 2 Replies View RelatedHere's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I didn't have this problem with CS4 and I've only recently upgraded. I work around this problem by using the proper Free Transform tool (ctrl+t) but it would be nice to know why the hell this happens. It seems to me to be more of a graphical glitch than a software preference but I thought I'd check just-in-case.
Specs:
Photoshop CS5 V12.1 x64
PC
Intel Xeon W3505 @2.53GHz
Nvidia Quadro FX580
12 GB RAM
I've been using Photoshop since it first came out, and need to brush up on some things. I can't remember how to move an image and it's path to a new photoshop file at the same time.
View 3 Replies View Related
