I am trying to create the look that you are seeing a pic through binoculars. I can't seem to find anywhere to do this. I thought I could with Paint.net but I can't find it here either.
View 13 Repliesif is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies View RelatedWhen I try to save an image file as a pdf, Photoshop CS6 adds .jps instead of .pdf. I cannot open the .jps file, the message says it is damaged. I have used various versions of Photoshop for years and never had any problem making images into pdf.
Using the same Mac Pro, OS 10.8.2, 64-bit 16 GB RAM.
I've been using X5 since last year and have been able to create and burn DVDs without issues. Today I tried to create a DVD (I chose "Create Disc" from the "Share" menu) and a new window came up titled "DVD Movie Factory 7". I have never downloaded this and I am unable to get past this window. Did Corel update X5 with this new software? I can not create a disc like I did 4 weeks ago. I forgot to mention that I did have to perform a recovery and reset my computer to it's original settings a few weeks back and I reinstalled X5. My computer info is as follows:
Windows 8 64 bit
8GB RAM with Intel i5-3230M CPU 2.6 GHz
750 GB Hard Drive
I have a problem trying to produce a DVD from an m2p file. I am using VS Pro X2.
My file properties are
Video
MPEG-2 Video, Lower Field First
120,924 frame(s)
24 bits, 720 x 576, 4.3
25.000 frames/sec
6000kbps
Audio
MPEG Audio Layer 2 files
232,174,080 Samples
48000 Hz 16 bit Stereo
Layer 2
223kbps
My Project properties are
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 4:3
Video data rate: 6000 kbps
Audio data rate: 224 kbps
MPEG audio layer 2, 48 KHz, Stereo
I created an m2p video file with premier pro and imported it into VS and saved the project as a VSP file. It is just one complete clip of approx 1hour 20mins that needs no other editing except I added 4 chapter points and saved again.
The problem is that when I try to create a DVD by either Tools/Create Disc/DVD or through the Share Tab at the top, a window opens ok but I cannot do anything with it.
My project shows in the media clip list at the bottom (It shows black because I have a couple of seconds of black video at the start) but I just cannot find a way to get it into the preview pane so that I can use the jog slider or view the project.
When I click Add/Edit Chapter, another similar window opens and my file shows along with the 4 chapter point but I still cannot get it into the preview pane.
I was having an issue in Corel VideoStudio Pro x4. I could not create custom video output files (profiles; see attached image). So I ran VideoStudio as admin. No luck. I reinstalled it as admin and ran it as admin. No luck. I tried manually changing the files corresponding to the default video profiles with notepad. Initially I was denied access. Through a rigorous method of trying to figure out why I was denied access to changing the files, I found out that I was denied access to even renaming the Corel folder (with nothing running corel programs).
I downloaded a better version of task manager to figure out what must be running in the background. Nothing was running anything located in the Corel folder. I still couldn't even rename the corel folder on an admin account. I booted in safe mode (and then I could change the folder name, etc), and changed one of the default video output profiles. The changes stuck even across computer reboots, but my changes were not recognized in VideoStudio (no clue why; I changed the profiles found in the profile subfolder of Corel).
So, I figured what with the sale going on, I might as well upgrade to Pro x6. Bought it. Uninstalled VideoStudio x4 completely. Deleted the Corel folder entirely from Program Files (x86). Installed VideoStudio x6. Got it launched as admin, attempted to create a profile, and got the same error. Trying to rechange the Corel folder results in the same denial of permissions that I used to have, even after running it as admin, disabling UAC, and changing the security permissions on the folder itself.
How to create a custom profile. Attached is example errors. Need tocreate a profile that is the exact same as the WMV HD 720 30p default profile, only with better sound (24 bits instead of 16 bits and/or 48/96KHz instead of 41KHz), and then direct me to which folder I should place said filed in (as changing stuff in the profile folder didn't seem to make much difference).
CLICK IMAGE TO ENLARGE
My mindset doesn't work properly with shapes - more with lines and curves from point A to point B.
My normal usage of Xara is for banners and posters etc. not art or technical drawing. Anyway, I wanted to create a specific shape in Xara - it's not that I can't create it otherwise (it's very simple to create in CAD and export as PDF - import into Xara), it's that I can't create it in Xara - No matter what I try I cannot create this exact shape. I say exact specifically because I can close to fudge it, that's not the point. How would I go about creating this shape exactly.
Certified.xar
I had downloaded R.A 2012 last year and activated it. This past November, i had issues with my tower and reset it back to factory. Now I downloaded R.A 2013 first and now i can not download 2012 even when i go to "My Downloads" and try to reinstall it through Autodesk.
I have a project that requires 3 buildings and i am having a hard time making a roof for the second building. Some reason, I get "unable to create roof" when i get to the second building.
My Photoshop suddenly is not responding to any actions, such as opening ,creating or saving documents. Program is not freezed or anything, it just doesn't respond to actions. I worked with Photoshop last night, everything worked fine, set'd PC to sleep mode instead of shut down. Now when I woke up the PC, and tried to continue working, Photoshop just doesn't respond at all.
I had very little hard drive space available, but I cleaned it up to like 20Gb (I have worked with Photoshop, when there's only like 2Gb free space on scratch disk tho), closed other programs but still the same.
Restarting computer doesn't work anything, program opens, but it won't open or create anything. This is frustrating,
Win 7 CS4..I was working on a Nikon raw .nef image in Smart Image mode when the following error message appeared out of the blue. "Unable to create local adjustment. All the local adjustment controls are set to have no effect on the image." Should I uninstall & reinstall CS4?
View 2 Replies View RelatedSuddenly my Photoshop CS4 has stopped working. I can open the program, but are not able to either open files (jpg, psd, tif ++) or create new files. No error message, it just doesn't happen anything. The program doesn't stop working either, I can still browse all menus or try to open the file again, but nothing happens, it's just like the functions doesn't work. Sometimes I''m able to open a file, by browsing my computer and choose "open in photoshop cs4". Then the file opens in Photoshop, but I'm not able to do anything. No menus or actions are working. I'm running 64bit Windows 7 on a Lenovo T420s laptop.
I'm running photoshop version 11.0.2
I have tried to reset the preferences, tried to reinstall Photoshop, tried other versions (CS5) and even tried to reinstall my computer. The program is still not working.
System info:
Adobe Photoshop Version: 11.0.2 (11.0.2x20100514 [20100514.r.591 2010/05/14:02:00:00 cutoff; r branch]) X64
[Code]....
I have a problem creating a video file. I have HD camera and use Corel Video Studio Pro X3.
After I finished downloading all videos, I add transitions and click “create video file”. After that I select AVCHD NTSC HD-1440. I give file a name, save as “mpeg” and click “ok”. The file begins to render but then I always get an error “The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis”.
After that the programs shuts down. I am unable to create any videos with transitions. I can though make video with no transitions or other effects. I have a copy of the "dump" file but cannot attach it here, the system won't let me.
I have had this program for several years and no problems until yesterday. My computer, win7, 64 bit, did an automatic update. Now my corel draw will not run and the following error report appears.
"Unable to create a DOM document.Class not registered / Verify that MSXML4 is installed"
Can not reinstall program as the box is sitting on a shelf 800 miles away.
Using VS exclusively now, so here come all the questions.
I cant seem to "drag" a simple space between 2 clips on the same track. I wish to have a 5 second delay in between two clips.
I am able to create groups in autocad 2013 using .net but unable to create nested groups. I am talking about nested groups not nested group layers.
View 9 Replies View RelatedI have a very simple part I am trying to check using FEA; however when I get into the Simulation environment and click 'New Simulation' from Ribbon nothing happens.
The part in question is just a simple cylinder (I'm verifying what would be the best meshing spec to use in a larger assembly).
now a have a typical error to insert in my assambly a item from my content center, reciveing a erro like "unable to create component", i´m looking for a solution inside forums and find a solution but didn´t work for me, the solution watched and did for me as deleted of the content folder "CACHE" in my computer C:/....all users/inventor..../cache.
I use AI2009 with SP1.
What can i do, delete all families from content center and upload again?
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210 I can see that the script is in the Presets/Scripts directory OK.
View 3 Replies View RelatedI was editing my images on RAW when all of a sudden I guess I pressed an incorrect key (yeah you know those split seconds where something happened and you dont know what you did) and now everytime I want to use the Graduated Filter tool or the Adjustment Brush tool and I press on top of the image it gives me the following message:ERROR:Unable to Create Local Adjustment. All the local adjustment controls are set to haveno effect on this imageIt doesnt work on ANY raw images now, I tried pressing "Reset Camera Raw Defaults" and it still doesnt work.Is there a setting that I moved without noticing?At the time this happened I had 6 pictures on camera Raw I had synchronized them and I was doing small adjustments to one of the images, I had finished using the Graduated Filter tool on an image when then all of a sudden it stopped working.
View 5 Replies View RelatedI've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View RelatedI am trying to export some artwork as a PDF so I can get it printed, but every time I try to export it I get the attached message. I have tried various times always after a reboot but with no luck.
The file is only just under 7mb in size so I can't figure out why it is doing it.
It is important that I export with layers as I have a cutter guide included so the printer can see where he needs to position the print on the sheet and it is printed on both sides.
I am using XDP6
I'm trying to create a new local file but the option is greyed out (not available). We're using Revit Server 2013 and we have one Central Server and two Accelerators in different locations. This issue is affecting only one of the two locations.
View 1 Replies View RelatedI'm making a short animation on 3ds max design, it's supposed to be about 10 seconds, and I can't seem to find where I can control the animation speed. I render out the frames to AVI format, (abot 250 frames) but when I play the animation in VCL or any other mediaplayer, it seems to lack length completely - the timeindicator shows 00.00.00. I attached just a test animation, it's there but something's wrong..
View 9 Replies View RelatedI am using below method for getting Bitmap object from autocad file.
This method is working fine for AutoCAD 2012 application
But same is not working in AutoCAD 2013 application
publicBitmap GetAutoCADBitmap(string strFile, bool boolRetainBackColor)
{
Bitmap bmp = newBitmap(1, 1, PixelFormat.Format8bppIndexed);
[Code]....
I've got a DWG file generated from a software called 12D. It contains a polyline model of an embankment. I've imported it into Max and wanted to create 3D solids out of it so I can further manipulate this model and render.
I'm struggling to convert it into a 3D solid. I have tried the extrude and loft modifiers, but unable to get them to loft or extrude along the poly lines.
So I' thinking I may recreate the whole object from scratch vertex by vertex. How I can create a solid without recreating the whole object?
Attached a part of it for example here: [URL] ......
When I use my autoCAD at the office to create a Sheet set file I allways get the message "Unable to Create a sheet Set file". Is there a way correct this problem.I am using AutoCAD 2012 on a network. I have tryed to create sheet set files on my local C: drive and other drives without any luck.
View 1 Replies View RelatedI am using ver AutoCAD 2012. (Network Liciences) I get the message "Unable to create Sheet sets" in AutoCAD 2012. I also cant open previous made sheet set files
View 3 Replies View RelatedBefore rendering the program write:
make sure destination directory is writable and that the disk is not full. rendering aborted.
how could i find out where is error.
I have tried several times to install PaintShop Pro X4 firstly from the download and now from the CD. Every time I end up with a message saying that I already have a copy of the program installed.
View 3 Replies View RelatedI have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
On a particular project, when I go to 'SHARE' CREATE DISC' DVD' NEXT' I am unable to change the Menu template. An error message box tells me 'Failed to change menu template'
Program then hangs, if I try to close, I get another error message 'The program has encountered an unspecified error, Contact Corel technical support and send the dump file for analysis' The message goes on to specify an address for the dump file which I can not find.
Other projects work normally, I am able to change menu templates and create DVD discs.
Even with the offending project, I am able to create a Video file without problem.