VideoStudio :: Unable To Create DVD
Nov 4, 2013
I've been using X5 since last year and have been able to create and burn DVDs without issues. Today I tried to create a DVD (I chose "Create Disc" from the "Share" menu) and a new window came up titled "DVD Movie Factory 7". I have never downloaded this and I am unable to get past this window. Did Corel update X5 with this new software? I can not create a disc like I did 4 weeks ago. I forgot to mention that I did have to perform a recovery and reset my computer to it's original settings a few weeks back and I reinstalled X5. My computer info is as follows:
Windows 8 64 bit
8GB RAM with Intel i5-3230M CPU 2.6 GHz
750 GB Hard Drive
View 2 Replies
ADVERTISEMENT
Apr 20, 2011
I have a problem trying to produce a DVD from an m2p file. I am using VS Pro X2.
My file properties are
Video
MPEG-2 Video, Lower Field First
120,924 frame(s)
24 bits, 720 x 576, 4.3
25.000 frames/sec
6000kbps
Audio
MPEG Audio Layer 2 files
232,174,080 Samples
48000 Hz 16 bit Stereo
Layer 2
223kbps
My Project properties are
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 4:3
Video data rate: 6000 kbps
Audio data rate: 224 kbps
MPEG audio layer 2, 48 KHz, Stereo
I created an m2p video file with premier pro and imported it into VS and saved the project as a VSP file. It is just one complete clip of approx 1hour 20mins that needs no other editing except I added 4 chapter points and saved again.
The problem is that when I try to create a DVD by either Tools/Create Disc/DVD or through the Share Tab at the top, a window opens ok but I cannot do anything with it.
My project shows in the media clip list at the bottom (It shows black because I have a couple of seconds of black video at the start) but I just cannot find a way to get it into the preview pane so that I can use the jog slider or view the project.
When I click Add/Edit Chapter, another similar window opens and my file shows along with the 4 chapter point but I still cannot get it into the preview pane.
View 14 Replies
View Related
Nov 22, 2013
I was having an issue in Corel VideoStudio Pro x4. I could not create custom video output files (profiles; see attached image). So I ran VideoStudio as admin. No luck. I reinstalled it as admin and ran it as admin. No luck. I tried manually changing the files corresponding to the default video profiles with notepad. Initially I was denied access. Through a rigorous method of trying to figure out why I was denied access to changing the files, I found out that I was denied access to even renaming the Corel folder (with nothing running corel programs).
I downloaded a better version of task manager to figure out what must be running in the background. Nothing was running anything located in the Corel folder. I still couldn't even rename the corel folder on an admin account. I booted in safe mode (and then I could change the folder name, etc), and changed one of the default video output profiles. The changes stuck even across computer reboots, but my changes were not recognized in VideoStudio (no clue why; I changed the profiles found in the profile subfolder of Corel).
So, I figured what with the sale going on, I might as well upgrade to Pro x6. Bought it. Uninstalled VideoStudio x4 completely. Deleted the Corel folder entirely from Program Files (x86). Installed VideoStudio x6. Got it launched as admin, attempted to create a profile, and got the same error. Trying to rechange the Corel folder results in the same denial of permissions that I used to have, even after running it as admin, disabling UAC, and changing the security permissions on the folder itself.
How to create a custom profile. Attached is example errors. Need tocreate a profile that is the exact same as the WMV HD 720 30p default profile, only with better sound (24 bits instead of 16 bits and/or 48/96KHz instead of 41KHz), and then direct me to which folder I should place said filed in (as changing stuff in the profile folder didn't seem to make much difference).
CLICK IMAGE TO ENLARGE
View 5 Replies
View Related
Apr 29, 2012
I have a problem creating a video file. I have HD camera and use Corel Video Studio Pro X3.
After I finished downloading all videos, I add transitions and click “create video file”. After that I select AVCHD NTSC HD-1440. I give file a name, save as “mpeg” and click “ok”. The file begins to render but then I always get an error “The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis”.
After that the programs shuts down. I am unable to create any videos with transitions. I can though make video with no transitions or other effects. I have a copy of the "dump" file but cannot attach it here, the system won't let me.
View 3 Replies
View Related
May 8, 2013
Using VS exclusively now, so here come all the questions.
I cant seem to "drag" a simple space between 2 clips on the same track. I wish to have a 5 second delay in between two clips.
View 1 Replies
View Related
Mar 23, 2012
I have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
View 14 Replies
View Related
Sep 6, 2012
On a particular project, when I go to 'SHARE' CREATE DISC' DVD' NEXT' I am unable to change the Menu template. An error message box tells me 'Failed to change menu template'
Program then hangs, if I try to close, I get another error message 'The program has encountered an unspecified error, Contact Corel technical support and send the dump file for analysis' The message goes on to specify an address for the dump file which I can not find.
Other projects work normally, I am able to change menu templates and create DVD discs.
Even with the offending project, I am able to create a Video file without problem.
View 11 Replies
View Related
Apr 11, 2013
I couldn't create DVD disk, or, couldn't create video file either. It would go to about 99% & then hang the system for hours (until stopped with Task Manager).
I had installed all of the updates, including SP2. I've uninstalled today & I will re-install in the next day or so to see if it works.
View 1 Replies
View Related
Feb 5, 2011
I have WMV 1080p30 source files that I am trying to render to an 5-6min MP4 HD file for upload to Youtube. I am able to make WMV HD files, but wanted to see if MP4 HD files would make a better final outcome on Youtube (Youtube seems to add a lot of jaggies to my WMV uploads). However, whenever I try to render anything to MP4 HD, VSX3 crashes (it never gets past the "Creating files" message). The windows error log states that the faulting modules are kernel32.dll and ntdll.dll. I have QT 7.6 (not the latest) installed. I have XSVX3 updated to SP2 (although the file downoaded was patch3.exe). In the Make Movie template and in Share/Custom , I don't get the option to see/manipulate any MP4 HD formats or even use H.264 compression. When I bring up Mpeg-4, it allows me to use mainly standard-def or non-HD resolutions and on-H.264 codecs. Is it not seeing the profiles/codecs for HD H.264 from Quicktime? Do I need QT Pro or just the free QT? I can render MP4 non-HD. As an aside, I see no sign that CUDA is being utilized.
View 1 Replies
View Related
Jan 5, 2012
I need to put an ALT + 0156 character (œ) but it does not work.
When I create one with Work and copy/paste, only the o appear.
View 4 Replies
View Related
Nov 7, 2012
I am unable to import a DVD into VSX5.
DVD Properties only show as 195 MB udf file system / It is not copyright protected .It plays OK in Power DVD and Windows Media Player and lasts about 5 minutes .It is a free promotional DVD.
To try and import it into VSX5 I go import file -insert media to library -insert digital media -select drive, -start- when I select or get near the small boxes in the top right of title I or chapter1 boxes with the cursor - the screen goes black and the PC reboots loosing any unsaved data..
If I try to do a screen capture of a paused DVD screen either via print screen-paste as new image, or the dedicated screen capture feature in Paint Shop Pro X- the captured screen area only shows black....
View 1 Replies
View Related
Feb 28, 2011
When I get to the step where one edits the main and sub menus, I am only given the option to RETURN. The NEXT button is missing. This problem appeared after I was forced to re-install VSX2 following a computer crash. I am now running it on Windows 7 Home Premium.
View 2 Replies
View Related
Jan 14, 2011
Installed VideoStudio for compatibility with Windows 7. Used mainly for editing out commercials fron television programmes recorded onto DVD. Both single use and re-recordable discs used. Everything worked well though the program is top-heavy for my requirement. Automatic suggestion last week that I install an update. The update failed and the problems started. I can no longer import from DVD. The process appears to run up to 60% then stops. The program then stops responding and has to be closed using task manager. The DVD can only be ejected by re-starting the computer. Tried removing VideoStudio using the clean-up tool and following the regedit instructions. Re-installed but no improvement. Suggested workround by Corel is to copy the vob file from the DVD to the desktop, rename this file as a mpg then import into VideoStudio. This does not work. So at the moment I have un-useable software.
View 6 Replies
View Related
Jul 23, 2013
Every time I try to add an image I get a message saying that there is a format mismatch (see screenshot). This is strange because when I first installed it, everything was working fine. This applies to the following image types JPG, JPEG, GIF, PNG, BMP. I have done some searching and confirmed that I am not the only one who has experienced this.
View 1 Replies
View Related
Oct 3, 2011
I have a project I'm trying to render to an mp4...I previously rendered 2 different versions of it, then after this morning when I re-edited and finished the project, it doesn't let me render an mp4.
If I try to render, it goes through the whole process and then I watch as the file disappears when rendering is complete. It let me render to an AVCHD file, but it won't let me render an mp4 from it. I tried uninstalling/reinstalling VS x4 and installing the SP but nothing works.
View 2 Replies
View Related
Nov 18, 2010
I have been unsuccessful in adding voice over to a project that I have created. Have tried using both the built-in microphone on my laptop and a plug-in one. When I activate voice-over the adjustment for volume does not function and nothing is recorded when I try.
View 6 Replies
View Related
Sep 28, 2013
I uninstalled VS Pro X4 about five times and each time re-installed it (in order to clean out any duplicate files of VS Pro X4 that may have been the cause of a crash-on-startup that always happened when I changed the name of the user account). I uninstalled VS Pro again but afterwards the installation wizard of the installer did not work. So now I don't have VS Pro X4 on my computer any more! Secondly, if there is a maximum limit to the number of times the installer works, is there some way to get a new installer or just get one more installation?
View 3 Replies
View Related
Oct 23, 2011
When I connect my camera and select Capture Video, I receive the error:
Unable to switch to capture mode
Check if your video capture driver is working properly
15023:4:2
I select OK and it properly identifies my camera in source as Canon HV30
Using the VS Pro X3 software, I can play, ffwd, pause, etc the camera however, it will not Capture the video at all
This is on my dads pc. he is running:
- Video Studio Pro x3 Pro which has had all patches applied.
- PC is an intel i5 2500 on a Asus P8P67 Pro motherboard.
- 64 bit Windows 7 Home premium all patches applies
- Canon HV30 connected via firewire
Note, I have used this camera with VS Pro x3 on another pc with no issue.,
not sure if i have got a setting applied incorrectly in vs pro x3 or not.
View 9 Replies
View Related
Feb 1, 2011
I've just made my first attempt of transferring my camcorder tapes to DVD using the video studio pro 3, all seemed to be going well until I tried playing them in my DVD player, you can watch the DVD but there's no sound however, if I play the DVD in my laptop it plays as it should (sound and vision).
View 4 Replies
View Related
Oct 28, 2012
When I try to save an image file as a pdf, Photoshop CS6 adds .jps instead of .pdf. I cannot open the .jps file, the message says it is damaged. I have used various versions of Photoshop for years and never had any problem making images into pdf.
Using the same Mac Pro, OS 10.8.2, 64-bit 16 GB RAM.
View 2 Replies
View Related
Apr 26, 2011
In VS X4 I see the clouds, rain, lightning, but did not see an option for snow in FX. How to do that or where I could download one
View 4 Replies
View Related
May 17, 2011
Having produced my first video production on VS4 I made several copies on DVD but I have been unable to get any of those DVD copies to play properly on most DVD players. They all behave differently on on Different players, on some players they won't even start, some will start and play part of the way through before playing up. All copies behave differently on different players. I have been able to get most copies to play properly on my computer.
View 1 Replies
View Related
Nov 13, 2011
I have a new mini recorder which records 720x480 at 29.897 fps. Video studio says Unable to open file *****.avi for all of the files. They play perfectly well with MS media player, VCL, Quicktime etc so what is wrong ?
View 9 Replies
View Related
Feb 2, 2011
I have a Samsung Captivate and it records video as .3GP files. I can't import this file to VideoStudio X3. I did the latest "Patch" and I'm running version 13.6.2.69. Shouldn't I be able to import these videos?
View 12 Replies
View Related
Oct 10, 2013
Been using VidoeStudio Pro X5 for couple years and just picked up a used PC. It had XP and could capture with installed VS X5 with no issues. Today i upgraded to Windows 7, reinstalled VS X5 and cant get past the "Unable to switch Capture" error. I can capture using my Canon Vixia HV40 and Sony FX1000 via Firewire with no problems using HDV Split, Roxio Creator and Cyberlink Powerdirector, so problem must be somewhere with VS X5.I can "control" the camera (stop, play, rewind,etc) through VS X5, but the Capture and Option buttons are grayed out and no image in preview window.
I have tried googling and downloaded a few codecs and drivers but no joy. Naturally I have rebooted and tried fresh install as well
View 3 Replies
View Related
Apr 21, 2011
Just purchased a Nikon P500 and had / have to create a short video. The *.MOV files (I've tried everything from VGA to 1080p) will import into X2, but kill the app when I try outputting to any file type / format; I cannot even write to an audio file.
Nikon is next, then Adobe, but I can write the MOV file to a DVD and the files open in QuickTime and Media Player.
View 5 Replies
View Related
Apr 13, 2012
I opened a previously saved project and all the AVI files have blank spaces. When I click properties it says the file is unreadable. When I try to open the file it says unable to open file, catastrophic failure.
These are the same files that I used to edit and render a video a few months ago, and I was able to successfully open the same file in Windows Media Player. I am using VSX4 on a Windows 7 laptop. I'm not sure what updates are installed.
The video file is DV AVI file (720 x 480, 28854 kbps data rate, 298788 kbps total bitrate, and 29 FPS).
View 4 Replies
View Related
Jan 1, 2012
Unable to add more than one project to a blu-ray disc
View 5 Replies
View Related
Jun 6, 2013
I'm running VideoStudio Pro X5. I spent all day yesterday on a little project and wanted to get it to youtube afterward. Unfortunately, none of my share options seem to be working! I've tried creating a disc, creating a video file, and uploading directly to youtube, but after everytime I try, I get an error message and VideoStudio closes out. I tried with the demo of X6 as well. The error message says APPCLOSE and gives the dump file, I believe.
View 2 Replies
View Related
Apr 29, 2011
I've a large number of DV AVI (Type 2) files I've edited several times using VS. But in the last couple of days X3 has stopped loading them into the project timeline. I suspect I have inadvertently deleted, or unlinked, the Type 2 codec. Strangely, the files play OK with Media Player, it's just X3 that's refusing to work! I've reinstalled X3 but that's not made any difference. How do I identify the codecs available?
View 2 Replies
View Related
Jun 23, 2012
I've encountered an issue regarding opening FLV. or AVI file extensions. AVI files - Whenever I try to open AVI files in Corel VideoStudio X5 Pro I get an error message saying "so and so file is not accessible" and then a second message replies: "These files cannot be added to the project. These files may of unknown file format, the computer does have enough memory, or the file is copyright protected."
Here's the information on said file.
VIDEO ASPECT
Video Size: 19.3 MB (19,844 KB / 20,320,402 b
File Length Correct
DivX Style "packed bitstream" AVI
OpenDML (AVI v2.0)
Interleave: 989 ms (24.7 v.frames), preload=1536
Audio frames: Split across interleaves
Video: 18.5 MB (95.93%)
Audio: 625 KB (3.15%)
AVI Overhead: 181 KB (0.92%)
[USER]DivX503b1393p
[USER]XviD0047
CODEC: XVID
AUDIO ASPECT
Codec: 0x0055 MPEG-2 Layer 3
Info: 24000Hz 56 kb/s tot , Joint Stereo
View 4 Replies
View Related
