Lightroom :: Rendering After Import Changed Colour?
Aug 26, 2012
I moved from Windows to Mac. Today I imported a set of photos from my camera to my disk. After rendering all of my photos became B&W (LR4 changed color treatment of my RAW files). It surprised me a lot. I did it again and again. All my photos are B&W. I have to change color treatment in all of them. I would prefer my old importing scheme (photos are color after rendering). I did not use any preset and all oprions were as usual (only changed a name of photos).
I noticed that LR4 changed a few other options: decreased highlights by 100, increased shadow by 100, increased clarity by 50, changed tone curve to strong contrast, increase sharpening to 100, noise reduction to 40, and so on. Increadible! How can I came back to my way of importing?
View 6 Replies
ADVERTISEMENT
Nov 1, 2013
The usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies
View Related
Jul 29, 2013
Slow rendering image previews in import dialogue?
My LR 5 is as slow as a snail generating those previews.
Importing my RAWs form the EOS 6D (saved on a 95MB/s 32 BG SanDisk Extreme Pro) it renders only the 12 or 24 displayed previews and leaves out the rest (the next only when I'm scrolling down). For 12 images LR5 needs 8-10 seconds. LR4.4 does the same process for all 150 RAWs in 1-2 seconds.
It doesn't matter if I want to import to my workstation (Dell Precision T1650, 8core Intel Xeon E3-1240 V2, 16GB RAM, 64bit) via USB 3.0 (Reader & Port) or to my laptop (Dell Latitude E6400). So it must be LR, not my hardware.
Are there known issues with the Canon-RAW format? I just updated EOS firmware to 1.1.3, but the renderspeed stays the same. For 1 image 3-4 seconds single...
View 1 Replies
View Related
Oct 16, 2012
I've got strange subtle color shift from reds to yellows when I'm doing the following:
1) import my raw files as DNG into LR
2) edit them in LR
3) ctrl-E them to edit in PS
4) edit them in PS (just drawing a dot with the brush tool somewhere, so the file could be saved and re-imported to LR)
5) save (not "save as") them in PS which bring them back as tifs to LR
This final tif from PS has some color shift in comparison to the original DNG file. Nothing is edited in PS.
Furthermore:
- if I'll open to edit the resulted tif with the color shift in PS once again with the option to use LR adjustments, I'm getting color shift in PS
- if I'll open to edit the resulted tif with the color shift in PS once again with the option to open the original tif without LR adjustments, I'm getting correct color in PS, as in my original DNG
LR - ProPhotoRGB
PS - ProPhotoRGB
View 18 Replies
View Related
Aug 14, 2013
Here is the story: I have batched out a folder of JPGs from Photoshop and would like to import them into Lightroom to Resize them . I'm resizing so that I can post them on my website.
I have double and triple checked to insure I have no "Develop" settings to be applied. I import the photos, and they look fine in thumbnails. Then they update one at a time with a washed out color to a bluish / b&w type color. I exported one of the photos to see if it was just a preview and sure enough the color is gone.
It doesn't happen on every import as I just resized a different folder of photos that I had downloaded from elsewhere a week ago and they worked fine. It's somewhat random. I am attaching links to before and after.
Original exported from Photoshop with no special settings:[url]....
Imported into Lightroom and Exported right back out with no changes:[url].....
View 1 Replies
View Related
Jun 15, 2013
I do most of my work on my desktop, and all the files are held there with xmp files. On my laptop, I import the photos in their folders, but leave the files on the desktop, and I am now going to be doing that more with the new smart preview option.
The one problem I have, though, is that the pick flags are not in the metadata, and therefore don't cross to the laptop. Is there any way this can be done? I use the laptop to show others, and to allow them to choose the photos they want, so it would be good to have the flags and the colour badges, and for the traffic to go in both directions.
View 3 Replies
View Related
Jul 11, 2011
I recently upgraded form corel 12 to corel x5. I used a specific colour palette for my printer. when i load up the documents used in corel 12 into corel x5 the colours revert to rgb or cmyk of a slightly different colour?
I need my old documents to open the same as they did in corel 12?
View 14 Replies
View Related
Mar 29, 2009
After making several adjustment layers, the layer merge is performed. However, it is observed that the colour changed after layer merging. It is confirmed with the histogram. This phenomenon also happens in layer flatten.
View 4 Replies
View Related
Oct 12, 2013
I'm going to try this again. Using PS CC for photographers, that is Photoshop CC and Lightroom 5.x, new iMac running Mavericks.
Having processed an image in LR and PS, and saved as TIFF back to LR. All is well.
If and when I subsequently take the TIFF back into PS for further tweaks and again save as TIFF back to LR, replacing the original TIFF, I then get the Metadata Conflict warning, the exclamation mark.
As far as metadata goes, I don't want to lose what I did in LR....that is, keywords, color codes, captions, gps data, etc. I do want to retain the additional adjustments I made in PS.
I've noticed that when I choose to 'import settings from disc' that the color code disappears and I have to re-do it.
If I select the 'overwrite with LR settings' option, my concern is that I lose those PS adjustments.
My questions is: WHAT settings could have been changed in my round trip to PS that trigger the warning?
View 3 Replies
View Related
May 17, 2012
My cursor/cross-hair suddently changed from Green to Orange. I don't know what it does to my drawing. I did not play with the settings... How do I get it back to green?
Capture.PNG
In addition, I also noticed that I do not get a textbox next to my cursor while typing commands. I love to have this back. How do I get it back? This affects me a lot as I can no longer see my scale factor and alike...
View 2 Replies
View Related
May 1, 2013
I have an image open in Photoshop, rulers visible on 2 sides. I pulled out the bottom right hand side (as I look at the screen) to have the image float in the background. Normally my background is grey, but suddenly it's turned to blue.
how this happened - what I unknowingly hit - but neither can I work out how to return to grey.
View 2 Replies
View Related
Aug 1, 2012
One of the most annoying and enduring features of VS - its been present in every version I have used from 11+ to X5 - is its ability to change a user selected text colour when entering titles, and be damned to the choice made by the user.
It happens when having entered the text of a title, one is trying to get a good readable contrast between the colour of the text and the background images it is displaying on. Selecting the text, a size and colour choice is exhibited in the edit panel. Selecting the colour 'square,' there are 3 choices presented - 32 simple ones on a palette or the choice of a much wider range using either Coral or windows colour pickers. Using either one of these latter pickers, selecting a colour and clicking OK inevitably gets a message panel that the colour has its been changed to something else. That sort of result is unsatisfactory, especially as it becomes a never ending circle.Corel may as well not offer the option for colour pickers at all as have the program do that.
This result has infected and frustrated every one of the hobby movie group I work with using VS as the editor. Screen colours are only pixels, and if a user makes a bad choice they can always change it. What options are available to to turn this sort of behaviour OFF??
View 4 Replies
View Related
Feb 24, 2012
Half way through my trial of Photoshop CS5 it stopped rendering hexidecimal colours correctly. If i take a background colour from my css page and put it in the colour picker, use it to border a photo and put that image back into the background it stands out like a sore thumb. This was not the case earlier in the trial, everything rendered fine. I have tried dozens of times to get it to work and i've checked everything i can think of, it still will not render the colour correctly. My operating system is Windows 7 on a Lenovo Thinkpad.what is going on and how to fix it.
View 9 Replies
View Related
Jun 15, 2012
V Ray rendering i am using V Ray physical cam + V Ray sun once i rendering flooring colour is changing the walls colour actually i have white colour walls.
View 2 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
Nov 27, 2012
I've got a need to import a couple of colours OR add a couple of colours to the permanent colour.
I am using MX Photo&Grphic Designer and WebDesigner. I use webDesigner to create and administer a business website and use MX2013 for my graphics (Business graphics that use a pallet of company colours). Everytime I open a new document (tab) in MX2013 I need to recreate my company colours and name them. This is also the same in WebDesigner.
Is there anyway to add colours to the permanent colour pallet so they are available for every document as a default? This small item would save me some time and the frustration of constantly needing to add the same colours to my pages over and over.
View 7 Replies
View Related
Jul 12, 2011
Can i import an image (such as a photo of a plant) into autocad and print it in colour? I can currently print the image but without colour.
View 6 Replies
View Related
May 3, 2013
I imported 150 raw photos from my Nikon D5100 and edited them all.
Then I imported one raw file from a different SD card (same camera) into the same catalog and edited that photo.
Suddenly all 150 photos I had originally imported into my catalog in raw were now JPG.
The only raw photo in the whole catalog was the single one I brought in from the second SD card.
I didn't click any weird buttons. I didn't do any kind of export or extraneous things.
All I did was:
1. Import 150 raw photos and edit them
2. Import 1 raw photo from a second SD card and edit it
3. Suddenly all my 150 raw photos were JPG photos and not raw any more
I am using Lightroom 4.4 with OSX 10.8.3
View 2 Replies
View Related
Jan 23, 2014
During a PS CS5.5 session the default file name is changed to "1.psd" and the file is corrupted and unopenable. This has happened on windows machines with several different OS, including XP64, Win7, and Win8. Correcting the default name does not correct the corruption of the file.
View 3 Replies
View Related
Mar 2, 2013
I have an external drive that until recently, was drive (E:). My computer now reads it as drive (F:). The Light Room catalog still knows the drive as (E:), so all of the pictures now show up as Offline or Missing. How do I get the pictures back without importing them again?
View 5 Replies
View Related
Mar 5, 2012
I need to import an pdf file which contains text in black colour in corel draw X5. By default it import the file in RGB colour model but I want the same in cmyk colour model.
View 2 Replies
View Related
Jan 29, 2013
I'm using LR 4.3 on a Win 7 64 bit PC. I notice that many of my photo's show "Metadata Status has been changed" but when I try to synchronize the folder(s) the message does not change. However, when I click the icon next to the message it will update that one photo. How can I update ALL photo's so they have the current and correct metadata without going one photo at a time.
View 1 Replies
View Related
Mar 8, 2012
When I export my images from LR4 to CS5 using the Edit In... choice, I first get the ...may require the...Camera Raw plug-in version 7.0... which we all know doesn't exist. Not that that isn't annoying enough (I know - I can turn off the warning) but the image then presented in PS5 is not of the same quality as the one I am exporting from LR4. It's almost as if the Lightroom adjustments are not carried through. I have tried all three color space options to no avail. Also, I am not being presented with the dialog asking if I want to edit a copy with Lightroom adjustments. These are Nikon RAW files (.nef) that I am working with. Other images that are not RAW files do display the Edit Photo with Adobe Photoshop CS5.1 dialog.
View 2 Replies
View Related
Dec 18, 2013
The Hd containing the original pics changed name; how can I indicate it to LR5?
View 1 Replies
View Related
Apr 2, 2013
By accident I changed all my photos names. All my 30.000 pictures have the same name now.( with different numbers at the end.) How can I fixe this. I have an old back up catalog with the right names. Or is my only option to copy my back up from my external hard drive to my computer and synchronise it in lightroom..
View 2 Replies
View Related
Jun 4, 2013
I have been using Lr for years and recently upgraded to 4.4 from 2.7. Now, when I export my images, they appear blown out and I do not have any changes marked in the export dialog box.
View 2 Replies
View Related
May 31, 2013
Until I launched LR4 today, my Folders display would show a chronological listing of the path names of the import locations I made, with the most recent import location at the bottom of the list. Today, it only showes the folder structure with icons that are in my main "pictures" folder on my "C" drive. I didn't change antything that I know of, and now can't find out how to get the chronological listing back without the icons. That was a very convenient to easily get back to any of the most recent import sessions and associated photo locations I had. How can I get rid of the folder icons and structure?
View 15 Replies
View Related
Jul 26, 2013
I am trying to add keywords to some images in my catalog, but when I change the keywords on one image, those changes appear in the Keyword Tags box for every image in the catalog!
View 6 Replies
View Related
Feb 25, 2014
I recently decided to use LR to catalog all my images (instead of Bridge). I love that PNG is now supported. Ran into one problem...all the snowflake and white frame images are viewed as a white rectangle due to the background white. I know Preview and other "viewers" don't have this issue. ACDSee has a setting to change the background. Can I do this in LR5? If not, is there a link where I can submit for a product enhancement to the Product Management team for a future release of LR?
View 3 Replies
View Related
Dec 7, 2012
How do I save a picture after I changed the background in lightroom 4?
View 4 Replies
View Related
Jul 10, 2012
How to store changed images in the catalog
View 6 Replies
View Related
