Photoshop :: CS5 Colour Rendering With Hexadecimal
Feb 24, 2012
Half way through my trial of Photoshop CS5 it stopped rendering hexidecimal colours correctly. If i take a background colour from my css page and put it in the colour picker, use it to border a photo and put that image back into the background it stands out like a sore thumb. This was not the case earlier in the trial, everything rendered fine. I have tried dozens of times to get it to work and i've checked everything i can think of, it still will not render the colour correctly. My operating system is Windows 7 on a Lenovo Thinkpad.what is going on and how to fix it.
View 9 Replies
ADVERTISEMENT
Jun 15, 2012
V Ray rendering i am using V Ray physical cam + V Ray sun once i rendering flooring colour is changing the walls colour actually i have white colour walls.
View 2 Replies
View Related
Aug 26, 2012
I moved from Windows to Mac. Today I imported a set of photos from my camera to my disk. After rendering all of my photos became B&W (LR4 changed color treatment of my RAW files). It surprised me a lot. I did it again and again. All my photos are B&W. I have to change color treatment in all of them. I would prefer my old importing scheme (photos are color after rendering). I did not use any preset and all oprions were as usual (only changed a name of photos).
I noticed that LR4 changed a few other options: decreased highlights by 100, increased shadow by 100, increased clarity by 50, changed tone curve to strong contrast, increase sharpening to 100, noise reduction to 40, and so on. Increadible! How can I came back to my way of importing?
View 6 Replies
View Related
Jan 25, 2009
I have just switched to Photoshop from Fireworks, and so far I'm not happy. For the life of me, I cannot figure out how to adjust the dang hexadecimal code inside of Photoshop CS4 for the desired color!
View 1 Replies
View Related
Jan 27, 2009
I made the switch from Studio 8 to CS4 not too long ago, and have been learning CS4 for a while. But I'm having a problem that's holding me back. How do I adjust the hexadecimal code (i.e. #e8e8e2) manually? I see no place to insert your code, and I kind of need that for doing web design.
View 5 Replies
View Related
Sep 15, 2012
Is it possible to export current swatches palette as a list of hexadecimal and HSL values?
View 5 Replies
View Related
Jun 17, 2008
how Photoshop calculates the interactions Between colors when using transfer modes and the brush.
Example If I paint using a brush that is set to multiply how does it use the hexadecimal color value to calculate the resulting color?
View 4 Replies
View Related
Jun 18, 2008
I am doing a school project on Photoshop and some of the math behind it. I am focusing on the Hexadecimal Color Picker and how Photoshop calculates the interaction between colors.
Fore example. If I lay down a color on a layer with a brush then change the transfer mode to "Multiply" And then brush over the first color. How does Photoshop calculate the resulting color?
View 1 Replies
View Related
Feb 18, 2013
On opening Elements 2, foreground color is white but changes to yellow if a file or image is opened. Checked hexadecimal values and they are the same. Operating system is Windows XP.
View 3 Replies
View Related
Dec 31, 2011
I create 16x16 pixel icons for use in my mapping software. I notice, when picking colours from the colour palette and dropping them into my grid using the brush tool, the initial colour is not its full intensity and that it is increased each time I click the mouse. This resulted in different hexadecimal values for each pixel square, which is unacceptable for my purposes. However, I discovered while writing this post, using the pencil tool drops the full colour intensity into the square. Now I am curious to understand why the two tools operate differently and how one knows, if using the brush tool, when full intensity is reached.
View 2 Replies
View Related
Feb 26, 2013
I have some c# code (though it could be any language) and I am trying to copy the colors used therein into an Illustrator design.
Here's the code:
private static readonly Dictionary<string, SolidColorBrush> _DefaultModeColours = new Dictionary<string, SolidColorBrush>
{
[Code]....
The colors are specified using hexadecimal numbers for the ARGB values.
In Illustrator I have the following color chooser:
I could fire up a calculator and convert each of the (nonobvious) hex values into decimal, but I imagine there is an easy way to change the Illustrator settings for the document to use hex values. Is there? If so where do I set it?
View 1 Replies
View Related
May 26, 2013
Is there a Hexadecimal Swatch Palate or Color Picker for Illustrator CS5? If not -- in CS6 - as I'm thinking of upgrading.But it seems like such a thing is so basic, surely I'm just missing it?
View 11 Replies
View Related
Dec 30, 2012
I want to add serial number in the documents I am making to protect it from piracy... Or no, rather easier way to spot the pirate if I find my pattern floating somewhere..
To make it condensed I would like to use hexadecimal digits. So I can add a small serie of digits on a pattern piece (the pieces are tiny, averaging at about 4-5 cm, filled with information) so this is my reason of why I want hexadecimals.
I will stuff it with six digit groups for different identifiers and then revision numbers too.
On every document copy, that is, pattern sheet I would like to repeat the same digit about 4-6 times, on the major pattern pieces, and on one license paper. So the digits needs to be identical on these 4-6 times.
But of course incrementing for each copy of the pattern sheet.
Let's say the serie is 1.01.0001-00.00.00 this is the format I am going to use. All the digits could be entered manually if it has to be done but at least the 4 digits group should be automated, and hexadecimal.
View 3 Replies
View Related
Jun 18, 2013
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies
View Related
May 21, 2013
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
View 2 Replies
View Related
May 21, 2012
why i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
View 1 Replies
View Related
Aug 19, 2013
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
View 2 Replies
View Related
Aug 10, 2013
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies
View Related
Feb 25, 2004
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
Jul 16, 2013
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
View 9 Replies
View Related
Jun 11, 2012
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Jan 28, 2012
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies
View Related
Jun 24, 2011
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
View 1 Replies
View Related
Jul 28, 2012
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
Jul 26, 2013
Windows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
View 2 Replies
View Related
Jun 4, 2013
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies
View Related
