Lightroom :: Photoshop Renders Differently
Feb 19, 2013
when I send an image from Lightroom 4.3 to Photoshop CS6 (CMD+E), it renders slightly differently. I notice Photoshop (CR) seems to not apply the lens correction profile I apply in Lightroom. Sometimes it seems the luminosity of the image too is slightly off, but updating the image preview in Lightroom seems to fix this (but not the lens profile issue). I thought it was a monitor color profile problem, but what has it to do with the lens profile correction? To me, it just seems Photoshop renders the dng differently than Lightroom.
I'm on a Mac and everything is updated to the latest release (both Adobe and OSX), so I don't think there should be a compatibility problem between software versions..
View 2 Replies
ADVERTISEMENT
Nov 10, 2011
Web albums created by Lightroom flash a white page prior to each new image when viewed in Chrome. The same web album does not flash a white page when viewed in Internet Explorer.
Is there a setting or way to make Chrome show Lightroom web album images without flashing a white page as described? A test website can be found at URL....
View 2 Replies
View Related
Sep 3, 2013
I remove an SD card from the Camera (canon 60d) Load it into my card reader and have it read by lightroom 5.0 and load the pictures into the catalog. I remove the card from lightroom and place it back into the camera. The camera indicates the card is not readable. However formating the card makes it usable. Lightroom 5.0 renders the card unreadable!
View 8 Replies
View Related
Sep 29, 2013
The fresh install of LR 5.2 renders all images - RAW and JPG - throughout the program with a very dark, green-yellow colorcast. The only place where images appear normal is in the Import dialog, while the thumbnail mode is active. Apart from that, every program module features this annoying reproduction. Here are some supporting screenshots (red rectangles are from me):
Import screen - thumbnail view - OK:
Import screen - preview - NOT OK:
Library view - NOT OK:
Strangely enough, if I export the picture to JPEG - without any modifications - the image appears normal again:
LR version: 5.2.1, 64b (tried the 32b version too, same error)
OS: Windows 8, 64bit
Camera: Canon 40d, imported images are RAW.
View 2 Replies
View Related
Jun 17, 2012
I've run in to a strange problem since the 4.1 upgrade.When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
View 7 Replies
View Related
Aug 6, 2013
I am creating 3D renders in PS CS6, and I am getting strange blocky artefacts in the renders. These appear on first pass and persist throughout the render. This has happened in the last 2 renders I have tried - I haven't used 3D for a while before this and I don't remember these before.
By blocky artefacts I don't mean the JPG artefacts created by the forum's degrading of the uploaded image, but the light coloured rectangular blocks around the "s",On Win7x64 with latest PS CS6 update; NVidia 650M2GB on a Core i78GB.
View 13 Replies
View Related
Mar 16, 2011
I'm having a bit of trouble with Photoshop. Colors are displayed differently, than in other programs (Paint, Firefox etc...), which makes it impossible for me to design anything. I tried restoring my settings by holding Ctrl + Alt + Shift on start up and it's still the same. I also tried re-installing Photoshop.
View 2 Replies
View Related
Aug 31, 2013
I would import a jpg as a smart object into my working doc. If I wanted to make changes to it, I would double click on it int he layer panel and it would open as a .psb. I would make changes and click save and it would update in my original document.
Using this method now, a "save as" window pops up to save my doc as a psd or whatever and when I do, it saves it in some temp folder but it does not update in my original document.
View 4 Replies
View Related
Jun 30, 2013
Photoshop displaying image differently on a same screen in different placement. Same image when moved a bit to the left changes image saturation. This is happening only in photoshoop CS6. I have two older versions of photoshoot that are working just fine. No other program is shoving behiever like this. I tried different files jpg .psd .png, same behavior.
Photoshop CS6, MacPro OS X v 10.8.4
View 6 Replies
View Related
Jan 18, 2013
[URL]What I want to do is to extract the girl's image and save it with a transparent background as a gif, and then put it up on the web page I've created, which has a dark grey gradient background.
The problem is when I do that, the contour of the girl's image contains a lot of white space and what appears like brush strokes! The white space doesn't show up at all while I'm using the Refine Radius tool on a black background. It also doesn't show up when I save the image as a gif on a dark background layer in Photoshop. It only appears when I save it on a transparent background and display it on my web page!
Here's the image, saved on a dark background:
Here's the image, on a transparent background, displayed on the live web page [URL]
View 9 Replies
View Related
Nov 16, 2013
I open an image from LR5 into CS6 and then apply Topaz Adjust 5 filter. I make my alterations in Topaz and save back to CS6. The resulting image in CS6 is markedly different to that shown in Topaz.
I have tried making the image 8 bit instead of 16bit in Photoshop before calling up Topaz but to no effect. The image rendered back in PS is lower contrast and less clarity, loosing many of the enhancements from Topaz. This seems to apply especially to monochrome effects. I can't see how to go straight from Lightroom to Topaz as Topaz only appears to be a plugin for CS6 and don't know if this would work anyway.
View 6 Replies
View Related
Jul 9, 2013
I have been faced with an almost identical problem listed here URL....The only thing that changes it from complete blackness is the "Ambience" value. I've done all software and hardware updates, reinstalled the graphics card driver, and restarted a multitude of times. I am using:
Dell Optiplex 390
Intel(R) HD Graphics 2000
Windows 7 64 bit
Photoshop CC
No Color Management
No plug-ins, or anything other than default PS settings
I used Lighting Effects on Photoshop CS3 and CS6 for almost two years on this machine with no problem. This was the first time I had tried to use it since I upgraded to CC. I uninstalled all other versions of PS when I upgraded, so I have not tried to replicate the problem in older versions.
View 2 Replies
View Related
Oct 15, 2012
It's in 3ds max 2013. I attach the image along with the post. How it happen? I use DefaultScanline. How could we show maps in Viewport the same in the render?
View 2 Replies
View Related
Sep 3, 2013
When viewing the model on screen it's exposed correctly, but whenever I try and render it out it's overexposed. I have included a screenshot of the rpref.
overexposed.jpgscreenshot.jpg
View 2 Replies
View Related
Jul 4, 2013
Using 2008LT/2012LT...I am working on a job that is being done in phases. I want to show one phase as per pen assignments and other phases in a grayscale. Is there a way to do this when plotting or do I have to change the viewport display individually for the grayscale vps?
View 3 Replies
View Related
Nov 19, 2012
I am working with Autocad 2011 and I have a problem with the geometry display. The block I created was a dynamic block of a concrete nail we use in surveying. The circle is created with two lines crisscrossing each other so as to create 4 quadrants within it. I also created it with visibility states and a lookup parameter for scaling to the appropriate size according to the drawing scale. The visibility state is for "Found state" and a "Placed state". For the found state 2 of the 4 quadrants are filled in(using a hatch pattern) and for the placed state all 4 quadrants are cleared. What is happening is the hatch pattern is changing to different quadrants of the circle depending on what scale you chose from the lookup scale list.
View 2 Replies
View Related
May 13, 2013
1- I am learning how to use the backburner program and finally got two computers to render an image together. Each line, there are 22, is rendered with different lighting, making the image garbage when stitched together. see attached. Is this a common problem?
2- separate question- is there a way to limit the cpu usage for a job sent to the network?
View 8 Replies
View Related
Apr 29, 2013
Many many times have i used the stretch command without any dramas. I now have a new PC with AUTOCAD 2010. Since the upgrade my stretch command seems to act differently.
If i go to stretch a polyline with some sort of arc joined. no part of the arc inside the window will move.
Please see the picture atatched for better detail.
Stretch.jpg
Why does it now stretch in this manner?
View 8 Replies
View Related
Nov 7, 2012
I hope I'm using the right terminology here... imagine a square drawn by Pen tool. A square with a stroke and fill. What I would like to do is to "none" colour two opposite sides (strokes) of the square while keeping the fill color inside. What is the best way (or any way for that matter) of doing this?
View 5 Replies
View Related
Mar 10, 2013
Can I set kerning differently in one sentence?
I have to make it in javascript.
function enterEanCode(){
var EanText= groupRef.textFrames.add();
EanText.textRange.size = 20.74;
EanText.textRange.characterAttributes.horizontalScale = 97.49;
EanText.textRange.characterAttributes.verticalScale = 100;
EanText.textRange.characterAttributes.tracking = -20;
EanText.textRange.kerning = 0;
EanText.contents = "8 801051 063653";
EanText.top = 153.104;
EanText.left = -86.67;
EanText.textRange.characterAttributes.textFont = textFonts.getByName("OCRB10PitchBT-Regular");
}
View 2 Replies
View Related
Nov 25, 2011
I seem to be having this issue with rendering in Max. I play this game called SimCity 4 and have a special user-built script for 3ds Max that allows exporting models made in Max into the game after a few steps.
The script basically sets up Mental Ray and some camera/light rigs to mimic realistic sunlight. In this image you can see the problem pretty obviously.. In some areas it looks like there is coplanar geometry, and i've double checked to ensure there isn't. Some objects have complete portions of the geometry missing, such as the roof.
[URL].........
View 7 Replies
View Related
Sep 2, 2011
Whats the best way to blend renders to backgrounds? I've learned a few ways, but not sure which is best. So, two questions, is this blending and if not how do you blend? Also, this is only my second sig, I'm not looking for judging in this thread just tips on blending for now.
View 2 Replies
View Related
Jun 27, 2012
Uhm, whenever I render I only get white outputs. I'm used to use Revit, and have forgot how to use autocad. But this project relies on making a couple of renders in Autocad.
How do I get useful outdoor as well as indoor renders?
Here's the .dwg
View 1 Replies
View Related
Nov 8, 2012
I am quite new to 3D modeling & rendering. I did a simple 3d model of a standing unit, but once i clicked on render, only a black screen appeared.
I did try to put a point light and increase its intensity but the model can barely be seen. I also created a new camera and clicked render but to no avail.
View 3 Replies
View Related
Jun 24, 2013
I installed After Effects pretty much without changing anything, so the settings are more or less default. I'm using a Macbook Pro with OS 10.6.8 and After Effects CS6
I have enabled media and disk cache, max disc cache is at 100GB and I have an external drive (with 900GB spare) as the volume selected beneath that option. My internal SSD has not much spare on it. I previously had the internal SSD as the disc cache and still had this same problem.
My project is 1920 x 1080 25fps - And I'm trying to render to Quicktime. I've tried rendering to stills and then outputting to Quicktime (so as to have less computational effort), then running them through but the same problem persists.
If After Effects is the application in focus the project renders fine.
If After Effects is not the application in focus - ie. I work with it rendering in the background, the 'FINISHED' sound plays and the render is cut short a short while after I started working in another program.
The project render time is about an hour, so it's not really convenient.
View 8 Replies
View Related
May 28, 2013
Somehow my dockers started displaying in two columns side-by-side, where they used to be all on top of one another. Nothing I've tried has resulted in my getting it back the old way.
View 7 Replies
View Related
Jun 20, 2013
I am trying to use our standard room name block in two new files from a client but it is not showing up the way it is supposed to. It looks like a totally different font. I have checked the text options box and it says it's "romans", just like it is supposed to, but it does not look right. It also does it with regular mtext that I copy in from another file. Once I change it back it looks right, but when I pull it in, it defaults to Romans and @arialunicode MS. I'm assuminng that's what the block is doing as well, but how do I fix that?
View 5 Replies
View Related
May 28, 2013
Looking for how to set line weights differently for different parts of a wall.
I would like for the core wall to be boldest and for all the other finishes and sheathing to be finer and lighter.
Using the Manage>Object Styles didn't do this for me: I am looking for more that just one setting for the entire wall. Someone suggested settings for the materials, but I have not seen any line weight settings for materials.
JNCS computer, 64GB Ram, E5-1620 CPU, 256GBSSD, dual seagate 2TB HHD Raid1, k4000 Quadro 3GB graphics, Revit 2014LT, W7 OS, 27"+24" Dell Ultrasharp monitors.
View 9 Replies
View Related
Jul 7, 2011
Normally when I hit move or copy there cursor will change to a square and I can click single items for the command. If I enter "c" on the command line and change to the cross cursor I can select multiple objects by clicking and dragging.
In some drawing the cursor will not change to a square and I can not enter "c" on the command line. I can select single objects but the cursor becomes the standard windows arrow.
Is there a setting / variable in the drawing that can affect this?
View 8 Replies
View Related
Oct 24, 2012
If you create a leader in autocad it automatically places the text as shown i figure 1. I would like to create one that places it like in figure 2. How do you do this the smartest way?
mleader.png
View 5 Replies
View Related
Jan 28, 2012
I am trying to create image 1000x10px.
Width of col is 130px and second 870px.
They are both colored differently.
I need it to set it as an background of my web site.
View 1 Replies
View Related
