If you create a leader in autocad it automatically places the text as shown i figure 1. I would like to create one that places it like in figure 2. How do you do this the smartest way?
mleader.png
Ok, I'm sure there is a very simple way to fix this that I just haven't yet discovered. When I insert a stacked dimension in the top line of my leader text, the spacing gets automatically adjusted for the hight of the stacked dimension and it adjusts the leader line up so that it actually passes through my top line. Can this be avoided? I have attached a picture for reference.
View 4 Replies View RelatedI would like to add a Leader Text to lable a part- referencing the Part Number or whatever, move the text close to the edge of the part, to remove the leader/arrow and make the txt rotate 90deg to be vertical. I have messed with style settings for a new Vertical Txt style, and Vert Dim style -(pointed to the Vert Txt style and adjusted Notes and Leaders tab)
i don't understand why in the Format Text window the "rotation" box is always grayed out. can you unlock it?
What the setting is to create a space between the leader line and the text.
View 2 Replies View RelatedIs there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
I've been trying to construct a machine that places glue along a path. Check out the animation and you'll understand what I'm saying
View 9 Replies View RelatedI am trying to use our standard room name block in two new files from a client but it is not showing up the way it is supposed to. It looks like a totally different font. I have checked the text options box and it says it's "romans", just like it is supposed to, but it does not look right. It also does it with regular mtext that I copy in from another file. Once I change it back it looks right, but when I pull it in, it defaults to Romans and @arialunicode MS. I'm assuminng that's what the block is doing as well, but how do I fix that?
View 5 Replies View RelatedWhen I "move a dimension with Leader" is there a way to create an arrowhead on the create3d leader. After I create a Linear Dimension I select it and hover over the blue box in the dimension text and select 'Move with Leader" and the leader does not have an arrowhead. Is there an easy way to do this? Autocad 2012.
View 4 Replies View Related(Again) The “leader” of the “dimension text” disappears when the text is moved! Why?
I’m wondering why the “leader” of the “dimension text” disappears when the text is moved.
How can I control this setting?
I need to show this “leader” all the time. Is that possible?
Please, have a look on the screenshots below (the file is attached).
Is there a way to create an object/group in Illustrator and then copy it across one document in multiple places (multiple art boards, etc.) - allowing the designer to then update the original and seeing the changes cascade to all copies?
I know this can be done using InDesign by linking an Illustrator file and making subsequent updates to that Illustrator file. But I do not want to use InDesign, I want to use Illustrator. What I want is much like creating Symbols in Flash, updating one will cascade throughout the file.
how to draw leader with text and text box i have many points if i will click on point it will draw leader with text box
View 3 Replies View RelatedI am trying to create a leader that reads the block "name" and then places it into circle, or square at the end of a leader.
I see it in the "other" programs but I have plain ole Autocad.
Should be simple enough except my brain is locked in the clouds and im spinning around in circles.
Which may not be a bad thing, except NASCAR hasnt started yet.
Is there a way to have the Arrow leader convert to Loop leader in one click. Our company standards use diamond tags and sometimes i have to change the arrow to loop by inserting a leader.
View 9 Replies View RelatedC3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
In my current drawing, when I click into Model Space through a viewport and draw a leader, the leader is drawn with a Z coordinate of 0", but the text is being drawn at -9", so the leader is not associative and it doesn't have the tail on it. I just noticed it's also doing it in Model Space in the World UCS.
View 0 Replies View RelatedI have turned off or unchecked "Extend leader to text" (Multileader Style > Modify > Content > Extend leader to text) in all my templates.
Yet, when I start a new drawing using those templates, that feature is turned on (checked) again.
I've tested this several times. Yes, I'm using the same templates I've been saving. I've even created a new template from scratch with none of our standards in it. The check for Extend leader to text keeps returning.
I've tried this in both AutoCAD and Civil 3d.
Any way to duplicate this?
[URL].....
I am using "Attach Text to Leader" to add information about ballooned items to the balloon leader. The same information is needed for each balloon leader as shown below.
<COMPANY>, <DESCRIPTION>
<PART NUMBER>
I would like to just copy the fields from the first "Attach to Leader Text" and paste them in the subsequent "Attach to Leader Text" instances, instead of picking the "Type" and "Property" from the pull down lists for each of the three property I want to access, each time I place a "Attach to Leader Text" .
The problem is the fields in the subsequent Attach to Leader Text pasted instances do not automatically link to iProperties on the ballooned item? how to automate this procedure/
I have some difficulty in reversing the text on a leader to the opposite side. As per the picture below, it is on the right side, but I would like to move it to the left. When I drag it, the whole leader goes with it. The text in reference here is the one with ".06 x 45.
View 4 Replies View RelatedHere is the setup, I received a survey base from another firm. All of there leaders of text are actually cogo points with labels. I have xrefed the file into my sheet file and rotated the view, so obviously nothing looks like I want. Typically I bring the text forward into my sheet and manipulate it here, but it is attached to a cogo point. I could copy the points and label styles into my current drawing, but this doesn't sound like the best practice. What is a good way to overcome this challenge?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I am currently using AutoCAD 2011LT. When I add a leader sometimes the text appears fine and sometime the text appear to go bold, I tried retyping the text but it appears to be luck of the draw as to when it happens. I don't have a problem with this showing up on the screen but it transfer to prints on both paper and PDF.
View 2 Replies View RelatedRunning 2010 AutoCAD. ondering how to add and subtract a leader to Multileader text. Wondering if there is a shortcut key to type. I like the classic look, and dont want to have to switch between classic and the crappy ribbon.
View 2 Replies View Relatedit's possible to quote with quick leader and have the z value in text
View 1 Replies View RelatedI'm looking for a way to convert leader and text that is separate into a multileader where the text is attached to the leader. We just updated to new standards using the multileader and all the old stuff is not attached.
I'm using AutoCad 2009.
They are the only objects on this layer with which this happens.
View 6 Replies View RelatedMy text style height is set to 1/8, however my leader text height is 3/16. How do I change the leader text height? T
View 6 Replies View RelatedAll of my multi leaders (mleaders) worked great in 2012 with the added "extend leader to text" for leaders on the end of a text string, but in 2013, they now attach to the end of the box again.
Some appear as though they are "trying" to extend, but the beginning of the leader without the extension now starts at the end of the box on the FIRST line.
See the attached examples:
Top one - Mleader is on the end of a text box larger than the actual text (NOTE: I have many drawings like this, opening them in 2013 is a nightmare)
Version #2 - Note what the leader does in this example, the "extend to end of text" is the correct length, but it starts at the edge of the box, not the end of the first line of text. Again, this worked fine in 2012.
Version #3 - This is what should happen, only happens if you adjust the text box size. I don't really want to spend my clients money updated dozens of multileaders on hundreds of drawings to force the mleader to work.
I'm trying to add a single leader line to a drawing wihtout any text attached, the only way I can see is it use the 'leader text' command but now I can't detatch the text, is there any way to simply add leader only ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have noticed on several drawings that the multileaders change themselves when the drawing is closed and opened again. I put the multileaders in, they look fine, and when I close and open the drawing the multileader has extended itself across my text. If I edit it it fixes itself but it 'breaks' itself again once I close and open.
View 2 Replies View RelatedI have a question on Leader Text. Lets say I have a multiple sub-assys in a main assy. When I do the leader text on one of the sub-assys it will take the description from the individual part in the sub-assy. Is there a way I can make it put the assembly description rather than the part description?
View 9 Replies View RelatedHow do you word wrap leader text?
View 6 Replies View RelatedI don't normally deal with multileaders with text although a drawing I have has been done with these.
The leader is justified to the left of the text. If I drag the position of the leader head to the right hand side of the text, the leader still starts from the left hand side of the text (goes at the bottom of the text) so how would I justify the leader position of a multileader to the right hand side of the text?
I had a quick look in the properties pane earlier although am fairly busy and it is only a trivial issue.