I remove an SD card from the Camera (canon 60d) Load it into my card reader and have it read by lightroom 5.0 and load the pictures into the catalog. I remove the card from lightroom and place it back into the camera. The camera indicates the card is not readable. However formating the card makes it usable. Lightroom 5.0 renders the card unreadable!
View 8 Replies
Just upgraded my primary catalog to LR4. The LR3 import problem that started in ~3.3 or 3.4 has not gone away. Import effectively hangs the app.
I have a 6 proc AMD 1055T, Win7x64, w/ 16GB ram, an ATI 5770HD video card driving two monis, one 27" and one 24", and a ton of disk space (4 hd: c 384 free of 931, x: 191 f of 1.36TB, y: 1.55TB f of 2.72TB, z: 1.4TB f of 2.72TB). Free space isn't the issue. I usually do have several network shares connected; disconnecting them and removing all optical media makes no difference. My primary catalog has ~30,000 images When I try to import, the dialog itself takes up to a minute to open.
Eventually, the select source prompt appears; clicking on my usb2 card reader causes the dialog to disappear for a long time, sometimes > 2 minutes. The busy icon is displayed.If I'm super patient, the import disalog will open, but can take many minutes (3-5) to display, and once displayed, the busy icon remains and the dialog is not interactive for another long period, for example, right now, it's been > 10 mins on the 8GB card I'm trying to import from, import dialog visibility comes and goes, interacting with the scroll bar works, but so far I've only been able to scroll about half way thru the picture previews
This is obviously unusable. I've perverted my workflow at this point to be:
Copy images to temp folder in pictures hierarchy Sync temp folder, adding new images, without showing the import dialog Then, in Library view, I copy the new pictures to their final dest in my pictures folder hierarchy.
I just converted the catalog, so presumably it's optimized (optimizing made no difference in lr3.6 perf). As I said, this perf problem started in 3.3 or 3.4. ABout the only improvement I see is that I was able to successfully cancel the import; in 3.6 the app just stayed hung.
I had LR4 working just fine but now I cant import from camera or memory card?
View 1 Replies View RelatedAll of a sudden LR4 will not import my images from camera card, whereas I-Photo has no problem. I get the message " Some import operations were not performed. the following files were not imported because they could not be read (all images on the card are listed). I have re-downloaded LR 4 and restarted my mac (OSX 10.8.5). LR also will not let me import the same images from I-Photo , it gives the same message as when using the camera card..
View 2 Replies View RelatedCan I have the RAW files record onto the camera CF card and only the small jpegs go into the computer?
Want to shoot RAW but need the tethered computer to not slow down with ingesting huge RAW files.
Using LR v5.3 and Windows 8.1
For my particular workflow, I find that loading thumbnails as step 1 of the import process to not be of much value for me.
I would prefer to load all images from the camera CF card directly into my "Import" folder in Lightroom without having to first view and select images for import.
Step 2 for me would then distribute the images into other named folders in LR prior to the development, skipping the thumbnail phase of the process.
So, the Q: Is there any setting that allows importation into a selected folder in LR without first going through the thumbnail process?
Shooting tethered only seems to allow me to store the images in lightroom, not on my camera - really would like to do both
View 1 Replies View RelatedUntil last week I had no problems importing, playing or editing Canon 60D RAW or MOV videos in Lightroom 5. Since then, ever time I tried to import MOV videos LR5 crashed and needed to be restared - but is now 'permanently' crashed (see below). I tried the following to overcome the issue, without success: Unistalled and reinstalled LR 5Updated video card driverInstalled QuicktimeOS (Win 8 Pro, 64 bit) up-to-dateUpdated monitor driver. My last attempt to overcome the issue involved disabling all LR5 plug-ins. I then tried to import a video file to see if that fixed the problem. LR5 again crashed, but this time it it appears to have crashed 'permanently' because when I try to reload LR 5 it gets as far as the LR screen, tries to load 'previous import' into 'Library' and then immediately crashes, i.e. I can't get into LR at all to try any other possible 'fixes'. I am now totally locked out of LR 5 because even after uninstalling and reinstalling LR it continues to crash immediately when I try to open it.
Other info that may assist resolving the problem includes: The video files that can't be imported seem OK - I can play them through Windows Media Player and Quicktime.DivX not installed. Installed a new video card (Gigabyte GT610) and installed the latest driver from the Gigabyte website. I don't know if it's coincidental, but the new video card and monitor were installed before the problem arose. CPU is an i5 - 3550, 8Gb RAM (+-5Gb available), LR5 stored on 120Gb SSD with 8.3Gb free, photo/video files stored on a 680Gb HD partition with 55Gb free.
I am on LR 4.4 using Nikon D800E.I had been using LR tethered with some intermittent locking issues since LR 3 with my Nikon D300.About 4 months ago, I purchased a Nikon D800E and started to use it tethered (as I had done with the D300) with LR 4.
It would lock up consistently and I would have to reboot the computer to regain functionality. This would happen so many times during a shoot, that tethering just became unusable.
After much testing, It turns out that the problem occurs when the camera's buffer reaches zero. LR consistently is unable to recover from this zero condition. Periodically it will allow one more shot after a bit (as if it tried to recover), but the shot in LR has an esclamation mark by it as damaged data. And at that point it will never recover without a complete computer reboot.
I'm shooting with a team in studio - I can't have LR be this flakey - It is not acceptable to not be able to reach a zero buffer condition while shooting (I'm using Profoto and it can recycle faster than the camera can send to LR). It is not usable in its current state tethered with a Nikon D800. Just not usable.
I had to switch to using Nikon's Camera Control 2 (which functions perfectly and never has trouble recovering from a zero buffer condition), until Adobe can fix this significant bug.
Come on Adobe - Fix your software so it functions.I also noticed that conveniently Adobe removed the functionality of their report a bug link.
when I send an image from Lightroom 4.3 to Photoshop CS6 (CMD+E), it renders slightly differently. I notice Photoshop (CR) seems to not apply the lens correction profile I apply in Lightroom. Sometimes it seems the luminosity of the image too is slightly off, but updating the image preview in Lightroom seems to fix this (but not the lens profile issue). I thought it was a monitor color profile problem, but what has it to do with the lens profile correction? To me, it just seems Photoshop renders the dng differently than Lightroom.
I'm on a Mac and everything is updated to the latest release (both Adobe and OSX), so I don't think there should be a compatibility problem between software versions..
I want myself to decide what and when something shall be added to organizer.
View 4 Replies View Relatedi have maya 2012 student down load. i have a fresh install of windown7 64 bit and all the latest downloads and drivers.i am running a intell 2 quad core @2.4 ghz with 8 gigs of ram. my paging file on my main harddrive is at 15085 to 30000 mb. i open the maya 12 program and it runs fine for a while up to an hour or more then it starts slowing down tell it locks up and shuts off and some times it would not have saved my lase save. i set the auto saves to every 5 min and went to work again it seems to be working fine for a bout 30 min or so and it is asking me to auto save and i do tell it crashes again i look to reopen the save file and find it did not save any fo my auto saves. i have been battling this problen eversence i downloaded it, i even download the auto desk hot fix and installed it. the computers at my school seem to handle it fine and thay have less ram to work with .is there a paging file or memory setting for maya to increased the proforamce or any other trick that might stop me from melting my computer down for srap >8( moooo!
View 3 Replies View RelatedThe fresh install of LR 5.2 renders all images - RAW and JPG - throughout the program with a very dark, green-yellow colorcast. The only place where images appear normal is in the Import dialog, while the thumbnail mode is active. Apart from that, every program module features this annoying reproduction. Here are some supporting screenshots (red rectangles are from me):
Import screen - thumbnail view - OK:
Import screen - preview - NOT OK:
Library view - NOT OK:
Strangely enough, if I export the picture to JPEG - without any modifications - the image appears normal again:
LR version: 5.2.1, 64b (tried the 32b version too, same error)
OS: Windows 8, 64bit
Camera: Canon 40d, imported images are RAW.
When I select text I can't apply any changes to it until I convert to curves. I have tried selecting using the select tool and text tool - neither makes a difference until I convert to curves the everything is available
View 1 Replies View RelatedI'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies View RelatedI am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies View RelatedHow to I get camera profiles into LR 4 and Camera Raw?
View 3 Replies View Relatedrendering seems to go extremely slow. is this normal? i gave up a few times after half an hour.
View 2 Replies View RelatedWhen I insert an SD card LR5 will show a preview of all the content, but when you click on import, yget and error message saying it can't read the files.
View 9 Replies View RelatedEverytime I want to use the 3D Mode on Photoshop CS5 Extended, the one option the I need is disabled.
My videocard can handle the graphics. So that is not the problem.The one that I need is "New Shape From Layer". The "New 3D Postcard From Layer" and the "New Mesh From Grayscale" are usable.
I've been using photoshop CS5.1 for a long time with no problems. I upgraded to CS6 which i'm finding unusable due to repeated font warnings. I get interminable dialog boxes appearing over and over: "Adobe Photoshop CS6.app wants to use the font “xxxxxxx” that was downloaded from the Internet. Allow Adobe Photoshop CS6.app to use this font?"
It starts and stops doing this as i attempt to use PS CS6, and it's not just asking about fonts that are used in the document i have open - it does it for a huge list of fonts. And if i click 'Allow' AND 'don't ask me again for this font' it doesn't remember my choice and will ask again.
I have been using Video Studio Pro x2 for several years to edit and burn DVDs from the edited material with no problems. But for the last several months the burning process stops at the end of the VOB (whatever that is) but the blank disc is altered so it is unusable. It says that the Corel softwart has encountered a problem and has to close. I send a message every time but nothing comes of it. Another recurring problem is that it keeps telling me that the program will take a long time to burn even though I have checked the box to not show this message again.
The only way I have found to get the software to perform properly is to remove and reinstall the soft ware. Normal operation lasts for about four discs and the problem reoccurs. I have cleaned the hard drive of unnecessary files, etc. All my security updates are current.
I used this software on my previous two computers with no problems at all despite a much smaller Hard Drive, slower motherboard and much less memory.
I have a spline that runs through about 70 points to make the perfect line. But when I rotate the sketch the spline turned from green to black and is no longer recognised as a boundary. I then have to delete the black line and re-draw. How do I keep the spline green and usable?
View 3 Replies View RelatedI am using LR4.1
Just tried to import some images from an SD card (using a card reader) as I normally do and the import freezes on "importing files". Before import the thumbnails shows and I have tried a different SD card. Is this a bug? do I need to re-install LR?
I had LR3 opening when I inserted an SD card but when I installed LR4.4 it broke that and now I can't get LR4 to open when inserting a card. Still fairly new to MAC's.
View 4 Replies View RelatedLR 5 does not launch automatically when a card is inserted on my Mac. Previous versions did so & the preference to do so is selected.
View 2 Replies View RelatedJust come back from a photo trip and tried to import my images into Lightroom from my SD Card and Lightroom doesn't see them, all it see's are the images I took on Saturday.
Today I arrived at my location to photograph Pasque Flowers, I took 1 image then realised I hadn't deleted the images from Saturday so I used the 'Delete Images From Card' in my camera's menu and then proceeded to take a few hundred images. During the day I reviewed my images several times, so I know they were definitely saved to the SD Card.
When I got home I tried to import my images in to Lightroom and all Lightroom saw on the card were the images I took last Saturday.
I tried closing down Lightroom and opening it again - nothing, just the images from Saturday!
I tried using the SD Card reader on my iMac - again, just Saturday's images were found.
I then put my card back into my camera and all I could see were my Pasque flower images from today.
So it seems my camera see's todays images yet Lightroom only sees the images from Saturday I had deleted via my camera's menu at the start of today.
Lightroom 4.4
iMac 27"
Canon 5D MkIII
Lexar USB 2 Card Reader
Sandisk 16GB Extreme Pro SD Card
Why do my pictures look so much better when viewed while still on the sd card? Why do they lose all their color and sharpness once they are imported?
View 6 Replies View RelatedI am having issues importing photos from my SD card into LR4. I have 319 pictures on my SD card and LR is only recognizing 283 of them. In the Library module, I can see the pics that LR is not recognizing but they are greyed out. When I put my mouse over the picture it says "This photo has already been imported" but I never imported it. I did format my memory card right before my shoot if that makes a difference. I am using a MacBook Pro with Mac OS X Version 10.6.8. I have tried to restart my computer, restart LR, eject the SD card then put it back in but it's still not working. I attached a screen shot
View 1 Replies View RelatedImport problem
Lightroom 5
Mac OS X 10.8.4
Try to import CR2 files from CF card - files show in import screen but then will not import
"Import Results
Some import operations were not performed.
The following files were not imported because they could not be read (1):......."
Then lists ALL files on CF card
I tried copying CR2 files to a temporary folder on my desktop but get exactly the same message. Also tried importing iPhone images and get exactly the same message.
This all worked for the first week LR5 was installed and has just started happening after a week
Have no problems at all in Lightroom 4.4
Will not import from card, iphone or HD
View 1 Replies View Related
