Photoshop :: CS6 Unusable - Repeated Font Warnings?
Jan 28, 2013
I've been using photoshop CS5.1 for a long time with no problems. I upgraded to CS6 which i'm finding unusable due to repeated font warnings. I get interminable dialog boxes appearing over and over: "Adobe Photoshop CS6.app wants to use the font “xxxxxxx” that was downloaded from the Internet. Allow Adobe Photoshop CS6.app to use this font?"
It starts and stops doing this as i attempt to use PS CS6, and it's not just asking about fonts that are used in the document i have open - it does it for a huge list of fonts. And if i click 'Allow' AND 'don't ask me again for this font' it doesn't remember my choice and will ask again.
View 3 Replies
ADVERTISEMENT
Aug 27, 2008
how to enable a clipping warning in camera raw and how to modify the colour shown when there is highlight clipping. Any further information regarding clipping would be useful.
View 1 Replies
View Related
Aug 22, 2012
When I open a PDF file I get the following warning:
The document contains PDF objects that have been reinterpreted.
- The font is missing
Can I somehow open the file without showing that error, or simply automate and click OK on that window? I am using C# with COM reference. See code below:
var iapp = new Illustrator.Application();
var idoc = iapp.Open(file, Illustrator.AiDocumentColorSpace.aiDocumentRGBColor, null);
View 2 Replies
View Related
Nov 18, 2011
Is it possible to programatically suppress dialogs or warnings and errors when I open Inventor?
View 1 Replies
View Related
Jul 17, 2009
is it true, that CS3 master collection is not compatible with the new AMB II X4 9800 64 bit processor? If it is true,. then I hve one hecl of a big proble,. the money tree is lookin real skinny
View 39 Replies
View Related
Mar 8, 2013
I have accidentally loaded some patterns more than once and so they are repeated in the list (which is more annoying than anything at this point).
I have checked the manual and it just says to go to any Pattern pop-up menu and to then select the pattern and hold the Alt key and click (pointer turns into scissors) and the pattern will be deleted.
I don't want to delete the patterns by going to program program files > adobe > presets ... or what have ya b/c I do want one copy.
Is there a way to clear them all from the list and then I can reload/import the patterns again?
I have tried to get rid of the duplicates in the list by using the Preset Manager, the Import/Export panel and by (of course) the (above) Alt + Click on the pattern name to no avail. All in all I would just like to keep my patterns organized so as the collection grows I'll be able to manage them better and find 'em more quickly.
View 8 Replies
View Related
Jan 2, 2013
Everytime I want to use the 3D Mode on Photoshop CS5 Extended, the one option the I need is disabled.
My videocard can handle the graphics. So that is not the problem.The one that I need is "New Shape From Layer". The "New 3D Postcard From Layer" and the "New Mesh From Grayscale" are usable.
View 2 Replies
View Related
Nov 24, 2013
How can I stop CS6 repeatedly requesting entry of the license number.
View 10 Replies
View Related
Sep 30, 2013
I'm using photoshop cs6 to create textile designs, and occassionally, (it hasnt happened with every tile) when i change the image size of my tile e.g. from 15cm sq to 10cm sq, then try to repeat the tile it forms thin lines between the tiles?
heres the tile repeated after ive changed the image size and you can see the thin lines...when i zoom in on the tile edges where the line has formed it looks like this....almost as if theres empty pixels that can then be coloured in.
i dont think its a problem when creating the tile because before i changed the image size it repeated fine with no lines, its something thats happeneing when the image size is altered.
View 3 Replies
View Related
Aug 22, 2005
I need to crop arbitrary shapes (e.g. triangle, star, hexagon, etc.) out of a series of pictures. The number of pictures is relatively small (less than twenty), and I will have to manually select the area to be cropped. But, I don't see how I can crop to, say, a hexagon repeatedly. What I would like is a cookie cutter so I can simply size the shape and then stamp it out.
View 1 Replies
View Related
Jun 7, 2004
From my original picture, I have selected an area (which took about 1/2 hour to carefully select!) and have cut it out into a new layer. What I now want to do is save the file in this state, so that I can repeatedly change the colour of the selection to different colours, at different times, as I find new colours to use!
View 2 Replies
View Related
Aug 10, 2012
I am saving graphics from Word for usage in a Framemaker document. When I copy and paste the file into Photoshop it becomes blurred and unusable. How do I resolve this? I have tried saving the file in it's highest resolution but that doesn't work either.
View 1 Replies
View Related
Sep 2, 2013
I am a Photoshop 7.0 user on Windows XP. I have used Photoshop 7.0 for several years with pleasing results. Recently my installed version crashes at the same stage of use. I decided to buy a new program CD and uninstalled the original program. After installation of the new program Photoshop 7.0 still crashes at the same stage. Photoshop 7.0 starts up normally. Opens and displays an image file normally. However as soon as you select an option from the drop down menus e.g.(Filter/Unsharp Mask) the cursor arrow changes to a small square outline and most of the drop down menus become grey and unusable. The View menu still displays and functions normally all others are frozen. My installed version of Photoshop 5.0 works perfectly! Any other way than a complete system re-installation?
View 3 Replies
View Related
Aug 9, 2012
Ps CS6
OS X 10.6.8
Problem: Transform applied to Smart Object cannot be repeated on another target.
"Edit > Transform > Again" fails to transform any target after a Transform is applied to a Smart Object.
View 6 Replies
View Related
Dec 19, 2012
Currently in PS and Camera raw, double-clicking the Hand tool fits the document and double clicking the zoom tool zooms to 100% (1:1 pixels)
This isn't good since it's completely unusable:
- dbl click zoom shows 100% - there's nothing to zoom, since it's zoomed...
- dbl click hand shows the image fit to window - the hand tool wouldn't make anything
switch the current double click behavior on Zoom and Hand tools so:
- dbl click hand shows 100% (1:1 pixels) so I can look around and see details
- dbl click zoom shows fit to window so I can zoom in to a region I want
View 3 Replies
View Related
Oct 10, 2012
Photoshop CS6 unusable -interface freezes and not enough memory message - on a specific hardware
View 8 Replies
View Related
Dec 11, 2012
I accidentally resized a batch process to an unusable size! Is there any way to undo this?
View 2 Replies
View Related
Jul 29, 2013
Until last week I had no problems importing, playing or editing Canon 60D RAW or MOV videos in Lightroom 5. Since then, ever time I tried to import MOV videos LR5 crashed and needed to be restared - but is now 'permanently' crashed (see below). I tried the following to overcome the issue, without success: Unistalled and reinstalled LR 5Updated video card driverInstalled QuicktimeOS (Win 8 Pro, 64 bit) up-to-dateUpdated monitor driver. My last attempt to overcome the issue involved disabling all LR5 plug-ins. I then tried to import a video file to see if that fixed the problem. LR5 again crashed, but this time it it appears to have crashed 'permanently' because when I try to reload LR 5 it gets as far as the LR screen, tries to load 'previous import' into 'Library' and then immediately crashes, i.e. I can't get into LR at all to try any other possible 'fixes'. I am now totally locked out of LR 5 because even after uninstalling and reinstalling LR it continues to crash immediately when I try to open it.
Other info that may assist resolving the problem includes: The video files that can't be imported seem OK - I can play them through Windows Media Player and Quicktime.DivX not installed. Installed a new video card (Gigabyte GT610) and installed the latest driver from the Gigabyte website. I don't know if it's coincidental, but the new video card and monitor were installed before the problem arose. CPU is an i5 - 3550, 8Gb RAM (+-5Gb available), LR5 stored on 120Gb SSD with 8.3Gb free, photo/video files stored on a 680Gb HD partition with 55Gb free.
View 4 Replies
View Related
Jul 12, 2012
rendering seems to go extremely slow. is this normal? i gave up a few times after half an hour.
View 2 Replies
View Related
Aug 27, 2011
After reviewing some of my rendered videos, I find out that most (if not all) of them lose or add a few frames during the rendering. This seems to happen within the first 30 seconds of my 3 minutes clips. My orginal MPEG2 files are OK, but not the rendered MPEG, after editing. To make sure of that, I review them in my Pro X4, I place the original on my main track, and I put the rendered MPEG on the overlay. I can then pin point the exact frame where that problem appears. My original file is of good quality and has been captured wih a hard disk camcorder (Sony SR100).
View 14 Replies
View Related
Apr 8, 2013
I have been using Video Studio Pro x2 for several years to edit and burn DVDs from the edited material with no problems. But for the last several months the burning process stops at the end of the VOB (whatever that is) but the blank disc is altered so it is unusable. It says that the Corel softwart has encountered a problem and has to close. I send a message every time but nothing comes of it. Another recurring problem is that it keeps telling me that the program will take a long time to burn even though I have checked the box to not show this message again.
The only way I have found to get the software to perform properly is to remove and reinstall the soft ware. Normal operation lasts for about four discs and the problem reoccurs. I have cleaned the hard drive of unnecessary files, etc. All my security updates are current.
I used this software on my previous two computers with no problems at all despite a much smaller Hard Drive, slower motherboard and much less memory.
View 6 Replies
View Related
Jan 14, 2013
I have a spline that runs through about 70 points to make the perfect line. But when I rotate the sketch the spline turned from green to black and is no longer recognised as a boundary. I then have to delete the black line and re-draw. How do I keep the spline green and usable?
View 3 Replies
View Related
Mar 11, 2012
Just upgraded my primary catalog to LR4. The LR3 import problem that started in ~3.3 or 3.4 has not gone away. Import effectively hangs the app.
I have a 6 proc AMD 1055T, Win7x64, w/ 16GB ram, an ATI 5770HD video card driving two monis, one 27" and one 24", and a ton of disk space (4 hd: c 384 free of 931, x: 191 f of 1.36TB, y: 1.55TB f of 2.72TB, z: 1.4TB f of 2.72TB). Free space isn't the issue. I usually do have several network shares connected; disconnecting them and removing all optical media makes no difference. My primary catalog has ~30,000 images When I try to import, the dialog itself takes up to a minute to open.
Eventually, the select source prompt appears; clicking on my usb2 card reader causes the dialog to disappear for a long time, sometimes > 2 minutes. The busy icon is displayed.If I'm super patient, the import disalog will open, but can take many minutes (3-5) to display, and once displayed, the busy icon remains and the dialog is not interactive for another long period, for example, right now, it's been > 10 mins on the 8GB card I'm trying to import from, import dialog visibility comes and goes, interacting with the scroll bar works, but so far I've only been able to scroll about half way thru the picture previews
This is obviously unusable. I've perverted my workflow at this point to be:
Copy images to temp folder in pictures hierarchy Sync temp folder, adding new images, without showing the import dialog Then, in Library view, I copy the new pictures to their final dest in my pictures folder hierarchy.
I just converted the catalog, so presumably it's optimized (optimizing made no difference in lr3.6 perf). As I said, this perf problem started in 3.3 or 3.4. ABout the only improvement I see is that I was able to successfully cancel the import; in 3.6 the app just stayed hung.
View 3 Replies
View Related
May 4, 2013
I am on LR 4.4 using Nikon D800E.I had been using LR tethered with some intermittent locking issues since LR 3 with my Nikon D300.About 4 months ago, I purchased a Nikon D800E and started to use it tethered (as I had done with the D300) with LR 4.
It would lock up consistently and I would have to reboot the computer to regain functionality. This would happen so many times during a shoot, that tethering just became unusable.
After much testing, It turns out that the problem occurs when the camera's buffer reaches zero. LR consistently is unable to recover from this zero condition. Periodically it will allow one more shot after a bit (as if it tried to recover), but the shot in LR has an esclamation mark by it as damaged data. And at that point it will never recover without a complete computer reboot.
I'm shooting with a team in studio - I can't have LR be this flakey - It is not acceptable to not be able to reach a zero buffer condition while shooting (I'm using Profoto and it can recycle faster than the camera can send to LR). It is not usable in its current state tethered with a Nikon D800. Just not usable.
I had to switch to using Nikon's Camera Control 2 (which functions perfectly and never has trouble recovering from a zero buffer condition), until Adobe can fix this significant bug.
Come on Adobe - Fix your software so it functions.I also noticed that conveniently Adobe removed the functionality of their report a bug link.
View 8 Replies
View Related
Jul 30, 2011
we've just got 3ds Max at work, and I've started with the most basic of projects you could imagine, beveling a text/spline, which repeatedly crashes 3ds Max on adding the Bevel modifier.
I should add that the program seems to work fine with polys and meshes, and we've done some pretty complex work on it with minimum crashes already, it just seems to be something with these splines.
View 3 Replies
View Related
Jul 4, 2012
If I create a tiff from Photomatix, whether it's 8 bit or 16 bit, PSP X4 just can't handle it.
PSPX4_from_Photomatix by cabbiinc, on Flickr
Yet when I load the exact same file to PSP X3 it's fine.
PSPX3_from_Photomatix by cabbiinc, on Flickr
The actual tiff file coming straight out of Photomatix can be downloaded from [URL]
View 11 Replies
View Related
Jan 5, 2013
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies
View Related
Jan 9, 2012
My co-worker and I have been getting Fatal Error messages a lot recently and there doesn't seem to be any consistent task that is causing them. We've been getting the error messages with multiple different commands and multiple softwares such as ACAD 2009, ACA 2012, and ACAD 2012. We can't seem to pin down anything specific that is causing the crashes. Fortunately with my crashes I can simply restart the software and everything is ok. However, there have been a couple of times that my co-worker's system crashed and he had to have ACAD 2009 re-installed (this is a major pain because we have to go through our IT department to get anything done on our systems). We have different computers. About the only common thing between us is that we are both running the same version of Windows XP on 32-bit systems.
View 3 Replies
View Related
Nov 15, 2011
I have the Silicon crystal (as attached herewith along with he parts and the assembly). It is a simple and small structure which I created from 3D Cartesian coordinates. Now, I need to repeat this structure in X Y plane to make a bigger structure.
View 2 Replies
View Related
Sep 3, 2013
I remove an SD card from the Camera (canon 60d) Load it into my card reader and have it read by lightroom 5.0 and load the pictures into the catalog. I remove the card from lightroom and place it back into the camera. The camera indicates the card is not readable. However formating the card makes it usable. Lightroom 5.0 renders the card unreadable!
View 8 Replies
View Related
Mar 25, 2013
I use certain images on a very regular basis, mainly ellipses. To save me drawing a new ellipse each time, or importing a saved copy of it, is there a way to keep your most body images handy so in just a click possibly 2 you can put them on the new page in Corel Draw X4.
View 2 Replies
View Related
