Web albums created by Lightroom flash a white page prior to each new image when viewed in Chrome. The same web album does not flash a white page when viewed in Internet Explorer.
Is there a setting or way to make Chrome show Lightroom web album images without flashing a white page as described? A test website can be found at URL....
When I seek to authorize a Publishing Service through the LR Library left panel, it does so through the browser Opera. Why did LR chose to use Opera, and how can I change it to another browser (like Firefox.)
View 2 Replies View Relatedwhen I send an image from Lightroom 4.3 to Photoshop CS6 (CMD+E), it renders slightly differently. I notice Photoshop (CR) seems to not apply the lens correction profile I apply in Lightroom. Sometimes it seems the luminosity of the image too is slightly off, but updating the image preview in Lightroom seems to fix this (but not the lens profile issue). I thought it was a monitor color profile problem, but what has it to do with the lens profile correction? To me, it just seems Photoshop renders the dng differently than Lightroom.
I'm on a Mac and everything is updated to the latest release (both Adobe and OSX), so I don't think there should be a compatibility problem between software versions..
How do I delete albums from "local albums"?
View 1 Replies View RelatedI've run in to a strange problem since the 4.1 upgrade.When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
View 7 Replies View RelatedI have Lightroom 4.2. Last month, I created an Album. 2 weeks ago, I created another album.
Is it possible to merge the two together?
I have over 3000 pictures in Elements 11. They are in many different albums. When I installed Lr5 , the album titles appeared in Lr5, but most of them are empty with no photos. Only a few albums have photos. All of them are incomplete, and in a few situations the images don't belong to that album.
I should note my operating system is a Mac 10.8.
I tried Command key to select several images, then dragging the photos to targeted folder.
View 2 Replies View RelatedHow do I move my albums in Elements 10 to Lightroom 4 ?
View 1 Replies View RelatedIs there a way to automate the publishing of Lightroom folders as Revel albums? I'd like to create albums from my folders in Lightroom without having to select photos from each folder, create a new Revel album, and re-type the Lightroom folder title as the Revel album title. I just want Revel albums with the same names as my Lightroom folders.
View 5 Replies View RelatedHow do I convert Albums in Elements 10 to Collections in Lightroom 5
View 1 Replies View RelatedI just upgrated to Elements 11 and am a beginning Lightroom 4 user. Can I sync my Elements 11 albums with my Lightroom Collections?
View 3 Replies View RelatedI am attempting to use the Facebook Publishing service but I can not get my albums to show up. I have removed autorization (both form LR and FB) and reauthorized both. This use to work for me, not sure what changed for this not to work now. I am using Windows 7 64 bit, LR 4.4.
View 1 Replies View RelatedI can not upload my files to an online site to design a photo album. Apparently they are too large. Any screen print of how the export should be set to produce a quality 10 x 10 album and will upload in a reasonable time frame?
View 9 Replies View RelatedI keep getting this random problem with Photoshop as part of my CC suite.At random times certain actions I take within Photoshop will launch multiple tabs in firefox directing me to the Adobe help page.Just now it happend when I was was within my layer 'color overlay' properties and in the process of changing the color to white.
As soon as I click my colour picker Firefox opened up about 20 tabs all pointing to Adobes help page.I couldn't save my work as every time I went back to Photoshop the same thing happened. I lost my work.I have the latest update of the 64 bit version of Photoshop.
see this image[URL]...When I view this image in any browser the colors look great.But in any other program (Windows Photo Viewer, Picasa, & Photoshop) the colors are way way way off, and the picture displays very differently from program to program.
In Photoshop the only thing that is wrong is the black channel which looks grey. Photoshop also gives an invalid ICC notification when opening this image. Is there anything I can do about it?
what the command 'Apply Format Settings' in the File Browsers Automate menu does. Now being somewhat super intelligent I gathered that it 'applies format settings' but what format what settings and where are these settings set?
View 2 Replies View RelatedI've created an Edge animation (marquee) banner for a site I'm working on, but when I check it on older computers (for example XP running IE7), all I see is a large white rectangle where the marquee is supposed to be. A
View 5 Replies View Related[Photoshop CS6]
My 14-pt font looks VERY blurry on a 528-px wide image (96 ppi), and I've tried anti-aliasing, crisp, smooth, and none. None makes it look skinny and uneven, and the rest make it look blurry even at 100%. It's slightly more blurry when turned into a JPEG on Chrome.
What should my resolution be if I'm trying to display on browsers? Does it even matter? How can I make the font look sharp?
I am using Photoshop 7.0
I am trying to create two simple rounded corner gif banners for a web page, but can't seem to get the corners "un-jagged". I am by no means an experienced PS user but here is how I go about it:
I create a new image 830X40 pixels to fit my web page, fill it with a gradient fill to match the web page colors and then create another image at 50X50 pixels with 72 ppi resolution. On the latter image I draw an circle on the canvas with the elliptical marquee tool with anti-aliasing checked off and feathering set to 0 and fill it with the foreground color, then I draw a square on 1/4 of the circle with the rectangle marquee tool, copy that and paste it into the 830X40 image as a new layer and move it to its corresponding end. Then I erase just enough of the first layer to get my rounded corner. The process is repeated for the other end switching to background color to match the other end. I then choose "save for web" with all layers visible, and save it as a gif file called "topbanner.gif" with the transparency button checked and no transparancy dither. I then flip the whole canvas and save it again as "bottombanner.gif" with the same settings.
The problem is it looks ok in PS, but when I view the page there is still somewhat jagged edges. (My monitor is set at 1280X960 32 bit color) I have played with the dithering options when saving as a gif, but to no avail. I have also used higher resolutions (eg. 100 ppi) for the circle image but that doesnt seem to help either.
Should I be using image ready to do this? (which I know even less about)
I am VERY new to Edge. I have an animation with SVG graphics. When their size is scaled from initially 1% to 100% the images appear very pixelated in some Android (Android version >= 4.2, I think) browsers. Why is that? What can I do?
View 3 Replies View RelatedIt's in 3ds max 2013. I attach the image along with the post. How it happen? I use DefaultScanline. How could we show maps in Viewport the same in the render?
View 2 Replies View RelatedI'm having a bit of trouble with Photoshop. Colors are displayed differently, than in other programs (Paint, Firefox etc...), which makes it impossible for me to design anything. I tried restoring my settings by holding Ctrl + Alt + Shift on start up and it's still the same. I also tried re-installing Photoshop.
View 2 Replies View RelatedUsing 2008LT/2012LT...I am working on a job that is being done in phases. I want to show one phase as per pen assignments and other phases in a grayscale. Is there a way to do this when plotting or do I have to change the viewport display individually for the grayscale vps?
View 3 Replies View RelatedI am working with Autocad 2011 and I have a problem with the geometry display. The block I created was a dynamic block of a concrete nail we use in surveying. The circle is created with two lines crisscrossing each other so as to create 4 quadrants within it. I also created it with visibility states and a lookup parameter for scaling to the appropriate size according to the drawing scale. The visibility state is for "Found state" and a "Placed state". For the found state 2 of the 4 quadrants are filled in(using a hatch pattern) and for the placed state all 4 quadrants are cleared. What is happening is the hatch pattern is changing to different quadrants of the circle depending on what scale you chose from the lookup scale list.
View 2 Replies View Related1- I am learning how to use the backburner program and finally got two computers to render an image together. Each line, there are 22, is rendered with different lighting, making the image garbage when stitched together. see attached. Is this a common problem?
2- separate question- is there a way to limit the cpu usage for a job sent to the network?
Many many times have i used the stretch command without any dramas. I now have a new PC with AUTOCAD 2010. Since the upgrade my stretch command seems to act differently.
If i go to stretch a polyline with some sort of arc joined. no part of the arc inside the window will move.
Please see the picture atatched for better detail.
Stretch.jpg
Why does it now stretch in this manner?
I hope I'm using the right terminology here... imagine a square drawn by Pen tool. A square with a stroke and fill. What I would like to do is to "none" colour two opposite sides (strokes) of the square while keeping the fill color inside. What is the best way (or any way for that matter) of doing this?
View 5 Replies View RelatedCan I set kerning differently in one sentence?
I have to make it in javascript.
function enterEanCode(){
var EanText= groupRef.textFrames.add();
EanText.textRange.size = 20.74;
EanText.textRange.characterAttributes.horizontalScale = 97.49;
EanText.textRange.characterAttributes.verticalScale = 100;
EanText.textRange.characterAttributes.tracking = -20;
EanText.textRange.kerning = 0;
EanText.contents = "8 801051 063653";
EanText.top = 153.104;
EanText.left = -86.67;
EanText.textRange.characterAttributes.textFont = textFonts.getByName("OCRB10PitchBT-Regular");
}
I would import a jpg as a smart object into my working doc. If I wanted to make changes to it, I would double click on it int he layer panel and it would open as a .psb. I would make changes and click save and it would update in my original document.
Using this method now, a "save as" window pops up to save my doc as a psd or whatever and when I do, it saves it in some temp folder but it does not update in my original document.
Photoshop displaying image differently on a same screen in different placement. Same image when moved a bit to the left changes image saturation. This is happening only in photoshoop CS6. I have two older versions of photoshoot that are working just fine. No other program is shoving behiever like this. I tried different files jpg .psd .png, same behavior.
Photoshop CS6, MacPro OS X v 10.8.4