I edited a file in photoshop (CS4) "saved" not "save as" and imported it back into LR3 file was imported as DSC5677.psd while the original is DSC5677JPG. I cannot see the psd file in either library or develop models. How do I find/view the file?
View 3 Replies
When I try to import a photo, Lightroom5 tells me that my photo is a duplicate. When I search for the duplicate from within lightroom, lightroom can't find it by filename. When I search for the duplicate using a file manager outside of lightroom, the file manager can't find the duplicate either. I don't believe there is a duplicate file that has been imported in Lightroom.
View 1 Replies View Relatedthis is in regards to a Lightroom 3.5 exported JPG. This was a year ago when I had been told it was best to export files with simple renumbering of them from 1 to x... instead of retaining the original RAW 4-digit file name.
I've currently lost the original files, and need to do a search for them via these 4 digits to see if I have them tucked away in any of my drives. I downloaded a metadata explorer, and it's telling me all the lightroom editing information, and everything else, but somehow does not have the simplest of information — that 4 digit original file name.
Am I grasping at straws or is there likely to be any way to find this information out? I don't work with metadata, so there wouldn't have been any customizations to how Lightroom configures this...
I used Adobe lens profile creator to download a lens profile. I cannot find the file. It is not in the standard folder for lens profiles. Where does lens profile creator downloads the lcp file? It says local disk?
View 11 Replies View RelatedIs it possible to open a photo with another application, without a pre-conversion to tiff by Lightroom? I love Active D-Lighting, it saves me a lot of shadow/highlight recovery, but Lightroom doesn't support it. I edit most of my photos with Capture NX, but I use Lightroom to catalog them and edit others. I can't find a way of opening a nef file directly in CaptureNX from Lightroom.
View 6 Replies View RelatedI have just migrated my LR4 to a brand new system and am still getting this anoying error message on export however the images still seem to export.In case you can't rfead it it reads:
Unable to Export: An internal error has occured: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute
Today I got an error message when trying to export a photo. It has never happened before. Win32 API error 2, system cannot find specified file when calling Shell Execute ExW from AG Workspace. shell execute
View 2 Replies View RelatedI get the following error message when trying to export a file from LR 4.1 using Windows 7:
Unable to Export: An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute
I have, of course, uninstalled and reinstalled the program several times, along with computer reboots each time. It is still trying to find this file. I even attempted to find and replace the file so it could find it, but nothing seems to work.
View 1 Replies View RelatedHow can a file be exported in the Print view?
View 4 Replies View RelatedWhere can I turn on options on an image and get the file size and type?
View 4 Replies View RelatedWhen shooting RAW, the OM-D records 4:3 files no matter what the aspect ratio is set to. If you set it to 3:2 (for example), the camera records some sort of metadata to communicate this information to Lightroom, which honors the setting. So far, so good.
My question is, is there any way to override that setting? I have a photo shot at 3:2, but I can see from the in-camera preview that it'd be a better shot with the whole thing. But I can't figure out how to get LR 4.1rc2 to show me the whole thing!
In the process of trying to find out how to name virtual copies I came across Julianne Kost's blog which explained it very well.
However, I can't find the rather useful option of showing "copy name or file name" but rather just "copy name" or "file name" on their own. Since I'm using LR3 (Mac), is this a feature available only in LR4 or am I doing something wrong?
I see the file number come up in upper left when in Loupe view. This is nice. Today I was projecting for clients and the file numbers did not come up for a while and I was getting flustered. Finally, they did start appearing. What is the rhyme or reason is this?
View 2 Replies View RelatedIs there a way to view the file name of a photo when using full screen mode in Lighroom? I am using version 5.3.
View 7 Replies View RelatedIn premiere_elements_12. I'm on lesson one.Iv'e loaded the clips, selected video editor but the bar at the top does not have quick view as an option so I clicked media and it took me to a different place.How do I go back and get to the view where quick is an option along with guided and expert.
View 1 Replies View RelatedI need to change the section view name height..I can able to collect all the text and also able to change the height. But only for the view names i need to change the height. Im using COM API...
Here is my code.
//why i used 3 here is ,because section view name strings will be like" A-A"
//im also try to assign color for the view name
if (acadText.EntityName.Length.Equals(3))
{
acadText.Height = 6.0;
AcadAcCmColor sectionViewTextColor = acadText.TrueColor;
sectionViewTextColor.ColorIndex = AcColor.acMagenta;
acadText.TrueColor = sectionViewTextColor;
acadText.update();
}
I have managed to find the Top view, Right view and Front view through the Tools>customisation option, but cannot find Left, top or rear view.Where are they?
View 6 Replies View RelatedI'm looking to find the current rotation of my view in modelspace.
This isn't the ucs direction but any arbitrary view i'm using.
For example using 3dorbit to rotate around an object.
I want to match some temp graphics to align flat to my view.
I see there is a VIEWDIR variable. so that may be what I need.
The problem seems to happen ins CS5 and CS6 as well. We have a complex piece of artwork for a foil blister and we use a paragraph of text that has 3 transforms applied to which effectively step and repeat the paragraph of text in a repeat pattern across the artwork. This setup very precisely as it needs to be 100% accurate for print purposes as several units are printed side by side and the repeat runs across the units. Everything is setup correctly in Illustrator and then we re-save as a PDF with 'Preserve Illustrator Editing Capabilities' on.
We genearally save as a PDF 1.6 but we have tried all the combinations now. The file still looks perfect in Illustrator but when the PDF is opened in Acrobat (any version) the step and repeat (transform) on the paragraph of text is now no longer in alignment on onside of the artwork but still OK on one side. No matter what we do we can't fix this problem andit's recreatable each time. Also it's not file specific as we can build a new file and it will also exhibit the problem. We're only talking about a tiny jump here - <0.2mm but this means the artwork is out of spec.
Is there a way to find location/locations in profile view along profile with certain coverage/depth?
View 4 Replies View RelatedI'm not able to find any control for changing line width in stylized view type like tech, ink etc. Is there a control available for it or is it just as it is solution?
Feature is nice though and it would be nice to have such minor controls for it.
I used to use the 'back' button all the time in my old windows version of PSE organiser. I have now bought PSE 11 for my new macbook and finding that all the reasons I wanted to use PSE organiser rather than iPhoto are fast evaporating with this version. One of them is the 'back' button. If I scroll down down down a long way and find a particular photo and then deliberately or even accidentally, change the view to see data (that incidentally I used to be able to see in the same view on the info side pane such as folder location ....) then I lose my place in the media display and cant get back there like I used to. and have to hunt for the photo again. Similarly when I select a tag to display the selection containing that tag and then want to return to the previous main media display I return to the top, rather than wherever I had progressed to. This didn't happen in my old windows version. I cant understand why the developers would think it was a great idea to remove this facility, but I cant find it. It was invaluable when I was going back through the catalogue to old photos and adding tags or other info.
View 1 Replies View RelatedI'm trying to update a part with different colors for various features. My color styles are not available in this file. I can export them from another file, then use the import function to bring it over, but there has to be a way to force this file to find the entire "default" color file.
View 6 Replies View RelatedI'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
How do I reconnect a missing file when it doesn't show on the right hand side?
View 2 Replies View RelatedI want to open a file in a fold with hundreds files there, every time when I click the open file, the select file box only show the top 10 files there. How to set to see the previous file which I opened before.
View 4 Replies View RelatedI cant seem to find filter select or a list view for the record area. Both of these functions come in handy on feature films and episodic television especially vfx heavy shows.
View 2 Replies View RelatedThe loupe view on the second screen used to display information about the photo. I double clicked on it and it disappeared and no matter what I do I can't seem to get it back.
On the primary screen this can be added/removed or changed in Library Module by selecting the menu view->view options... which gets you to a settings window where you can set what shows. However, I cannot seem to find a similar thing for the second monitor.
I just upgraded form PSE 9 to PSE 12 and cannot find where I can view photos side by side. Thsi is something I use all the time and would love to know if it is till there somewhere.
View 1 Replies View RelatedWhere I can find the 3ds Max start up log file?
View 1 Replies View Related
