Lightroom :: GPS Location Not Saving In 4.1?
Aug 19, 2012
wall trying to export GPS coordinates. Here's the situation:
Lightroom 4.1 Camera (Canon) RAW imported from camera directly to DNG (no location info present) Location added via Map module, and additional metadata (Title, Caption, Keywords, Copyright, etc...) added Save Location not set to Private Export Metadata settings "Remove location info" is NOT checked (i.e., do not remove it)
I export to JPG and the location is not present. Flickr cannot see it, and I load it into Photoshop and examine the metadata and location is not there. I have also used some other online tools to verify it is missing, as well as Geosetter. If I set it in Geosetter, the data is then there. However, Lightroom 4.1 is just not saving it, and I have scoured all the settings looking for any other options.
This is crucial to my workflow and I'd prefer to do as much as possible inside LR and not have to use external tools.
View 7 Replies
ADVERTISEMENT
Nov 8, 2013
I am working from a server, say there is folder A, B, C and D.
I open up a file from folder A, amend it etc and go to save over that (cmd-shift-s - i use this as it previews correctly rather than hitting cmd-s where it will preview only a bit of the artboard) and the save dialog box will either show folder B, C or D or will just Downloads or Documents for example - basically it will want to save anywhere other than I opened it from!
This is difficult because if I am working on 4 or 5 files making small amends and just quickly wanting to save over them and get onto the next one I have to then navigate to where the file is, even though I opened the document from there.
I have experienced this problem ever since upgrading to Mavericks!
Also, the Save box is tiny! I always have to expand it to see the folder contents etc
It doesn't work either way if I use Save (cmd-s) or Save As (cmd-shift-s). My colleague is also experiencing the same problem since upgrading to Mavericks.
View 2 Replies
View Related
Jun 29, 2012
I have only been using Inventor since late winter . I have create a "master" folder with an assembly, drawing, and excel cutlist. This folder also contains sub folders with the sub-assemblies and parts.
In my master assembly I created ILogic rules to change dimensions of the parts, to select different profiles and to select different sub assembly configurations (on/off). It works fine as is.
Now, the idea was to copy the whole "master" folder and rename it to a job, launch the master assembly and configure it, then save it. The issue is that, even though the master assembly is in a new folder, it still references the sub-assemblies and parts from the "master" folder. How do I write a rule to "save as" all these sub-assemblies and parts to the new location?
View 4 Replies
View Related
Feb 15, 2013
I'm working on building an action in Illustrator CS5 that will do the following..Delete the layer "original artwork"Select AllCreate OutlinesSave as PDF "content.pdf" to the current working folder with specific settings in the Save PDF prompt..Up to step 4 this is pretty simple, but so far when trying to record the saving step it insists on using the directory that I'm building the action in - not the relative one based on where the current file is opened. Also, unlike the 'Save For Web JPEG' default Illustrator action, the PDF saving step doesn't retain any of the specific settings within the action.
View 2 Replies
View Related
Jun 16, 2013
How can I change the default location for saving pictures for the first time in Elements 10? For some reason, the program is savings my work in the Temp folder when I need the work to be in the Picture LIbrary.
View 2 Replies
View Related
Jan 26, 2013
If I create a file in Photoshop without coming from Lightroom or duplicate a file in Photoshop that I opened from Lightroom, is there a way to save the new file from Photoshop to the desired directory on my local hard drive and simultaneously have it added to my Lightroom catalog? Or do I need to save the file then import the file into the catalog? I'm working with CS6.
View 5 Replies
View Related
Jul 6, 2013
Photoshop Elements 6 (20070910.r.377499)
I do not know why the catalog has changed the file location of "ALL" pictures to the location on my backup drive.
Example: K:My DocumentsMy PicturesPetsPICT1460-1.JPG
The actual location of the original photo is: D:My DocumentsMy PicturesPetsPICT1460-1.JPG
The location of "My Pictures" is on my primary Hard Drive D:My DocumentsMy Pictures
Why is Photoshop changing all of my 37,000+ photo thumbnails to point to my Backup Drive K:?
I need to correct the catalog file. How do I make the correction and stop it from happening in the future?
View 2 Replies
View Related
Dec 6, 2011
I have a large number of images from a trip ( 10,000+) . So far I have colored coded 2 locations with blue & green. Now obviously I can filter by either color & view those images. Is there a way that I can see all uncoded images. That is filter out the blue & green so I can browse the uncoded images only? For example I would like to add a filter (red) for another location then not show the blue green or red.
Just for your info I do this as a gross filtering prior to ratings or collections. I am thinking that this would allow me to whittle down the images & make it easier to go thru. Using LR 3.5
View 2 Replies
View Related
Oct 12, 2012
I have my photos stored on my network drive and my office computer. Initially I started editing my photos off the network drive, mainly because I hadn't realized the location I had chosen. Now I'm having trouble with my network drive going offline intermittantly, making editing a chore because I keep getting "unable to locate file" messages. My question is, can I start using the same photos, which are stored on my office computer, and not lose the edits I have already made?
View 3 Replies
View Related
Jan 29, 2013
How would one set up a default import location, such as a directory below "My Pictures" or a flash drive? I don't see a way to create a macro or a preset that would step straight into a directory holding new images. In Windows, there are about six or eight levels from the top of the hierarchy to a location below My Pictures. There should be a way to automate the source location.
View 1 Replies
View Related
Nov 9, 2013
I imported them without moving them. So they're in the catalog.How do I transfer them to the drive which contains the entire catalog. (I should have hit "move" right?)
View 2 Replies
View Related
Feb 28, 2013
Due to some computer issues, I had to move my photos to a new location (different drive). How do I get Lightroom to point to that location?
View 1 Replies
View Related
Jun 9, 2012
A couple questions on backing up the catalog.
1. What is the default location for the backup?
2.Can I change the default location? I would like to keep the backup on an external drive
3. If I can not change the back up location or Lr must do the backup,can I copy/paste the Catalog I want to keep to my external drive.
View 2 Replies
View Related
Sep 1, 2013
How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times? I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
View 25 Replies
View Related
Mar 20, 2014
I had to change my photo disk (phisycal location). Now LR5 is showing the metadata, but as the photos are not there, I can't edit them. How can I update the photo locations,without loosing all changing metadata? LR5 remains installed in the original disk, but I moved the photos to a new disk.
View 1 Replies
View Related
Aug 11, 2012
I can't add sublocation (or any other) EXIF data to multiple photos after selecting them in library grid view. This happened recently; before that it worked. Keywords work, however, as they always did.
I'm running Lightroom 4.1 on MacOsX 10.7.4. Don't remember doing any OS updates just before this happened. I have 4 GB of RAM, 639.5 GB actual HD (135 GB unused).
View 7 Replies
View Related
Feb 1, 2014
I just purchased Lightroom 5 to replace Lightroom 3. I assumed that all settings would be carried into Lightroom 5, so I imported some new pictures wiothout checking the destination. They are now in the Lightroom Catalog, but not where the remainder of my pictures are. Is there a way that I can move them to the desired location?
View 7 Replies
View Related
Jul 19, 2012
Most of my photos aren't GPS tagged but I've manually added location information into the metadata fields such as Sublocation, City, State/ Province, etc. Is there a way to automatically get LR4 to look at the addresses and locations in those fields so that I don't need to manually re-add them to the map?
View 2 Replies
View Related
Jun 24, 2012
Any way to save a map with my data (locational) on it for import into the book module?
View 3 Replies
View Related
Jul 13, 2013
1. Where do I go in LR to change the location of the library?
2. Why are all the 2013 images I'm importing into LR going into the 2012 Photo Folder? Can I move all of the 2013 folders from 2012 Folder into the correct 2-13 Folder
3. Instead of giving my the correct import data 130712_photos, I ened up with a folder named 20130712? How do I correct this problem?
View 8 Replies
View Related
Jul 28, 2013
`I have recently upgraded from Lightroom 3 to 5. One of the triggers for doing this was getting a Canon G15; and the fact that my previous workflow didn't work for the CR2 files that it produced. (Previous work flow [Mac Mini ... a bit creaky now, running OS 10.7.5]: Use Nikon's importing tools to import photos to folders & create back up at same time [external drive] Use Preview to select & just do basic editing if needed [e.g. cropping]), import (add, rather than move/copy) to Lightroom - though often I'd wait for a bit & do quite a few groups at at time, especially if Preview was ample for what I wanted to do at the time. While the Nikon import tool was fairly agnostic about JPEGs, it naturally didn't recognise the CR2 files
The Canon software wouldn't create the backup files that I liked. I've also experimented with Image capture, but again, no luck with creating the backup
So, on the upgrade to lightroom 5, I have started to look at using Lightroom (though it takes forever to load compared to Nikon / Canon offerings). I have now discovered, however, that the backup that Lightroom does creates folders named "Imported on 28 July 2013" - rather than the 2013-07-28 folder structure that I use elsewhere. I can't find a setting to let me create the backup folders based on the same structure as the main import.
(The only option I can think of at present is to use Carbon Copy Cloner & run it daily on the regular destination, unless others have other ideas ...)
[Time Machine runs, but I also want to have the photos in a way I can easily access them from Windows etc., as well as Mac. And I'm a bit of a back up freak. I like plenty of the things. Just In Case]
View 2 Replies
View Related
Mar 12, 2013
I understand that Lightroom catalog backup saves only the metadata refering to changes etc. that have been made to photos. My question refers to the backup of the photo files themselves. If I do a Windows Defrag for instance, the photos will probably be moves in that process to a different location on my hard drive. Can Lightroom still find thesse photo files once they are moved? Or, if I restore photo files from an external drive to my internal hard drive which will probably locate them on different locations than they were originally, how does Lightroom associate the Catalog metadata with these newly relocated files?
View 4 Replies
View Related
Jun 19, 2012
Is there any way to make "unchecked" the default condition for "Remove Location Data" in the Export Dialog?
View 3 Replies
View Related
Dec 15, 2012
was trying to move a photo to another location and I clicked on something and it asked if I wanted to create a new catalog. I said yes. Now none of my photos are appearing in my lightroom.
View 1 Replies
View Related
Nov 5, 2011
For some reason my 2011 folder resides outside the main Lightroom folder in the application interface.When looked at through Finder though it resides where it should.
When in LR3 I Merge them it says 'A folder named 2011 already exists at this location'.how I can merge all the folders into one location in the LR3 interface?
View 1 Replies
View Related
Oct 30, 2013
How do I know which collectios my single image is in? Is it in one collection? Is it ten colelctions? How can i find out? If I click a single image, it doesnt highlight all the possible locations the image resides in. Am I missing something?
View 2 Replies
View Related
Mar 9, 2013
I have a brand new ASUS notebook Win 8 64 bit.
LR4.3 installed to the C: drive (default installation). I am now copying from my external drive all photos to the larger D: data drive.
Of course, I have the very latest catalog backed up to multiple places. The old laptop (Windows 7) was just a single C: drive instead of the two drives I now have.
2 Q: 1) To what location do I copy that backup LR4 catalog?
2) As I remember from some years ago, I also need to double-click on that LR4 catalog once it's in the proper place. Is that right?
View 2 Replies
View Related
Mar 9, 2013
Using a portable hard drive ,when I re-attach to the computer using same USB port I find that it is assigned a different location (eg hard drive L rather than G as before) Therefore LR says the associated files are missing.
View 3 Replies
View Related
Oct 5, 2012
I want to export more than 1 photo at the same time and have the watermark in a different location for each photo. Can this done and if so, how?
View 1 Replies
View Related
Apr 4, 2014
Lightroom 5.3 stopped Importing photos and videos. Error message appears "Could not copy a file to the requested location."
I uninstalled and reinstalled LR 5.3. Problem still occurs. There must be residual problems not cleared out by the uninstall.
View 1 Replies
View Related
Nov 11, 2013
I have photos all over my numerous hard drives and I want to find and move them all to one central location where I can start to organize them. How is this done using Lightroom 5? Not just create a catalog but I want to actually move the file to one large hard drive.
View 1 Replies
View Related
