Most of my photos aren't GPS tagged but I've manually added location information into the metadata fields such as Sublocation, City, State/ Province, etc. Is there a way to automatically get LR4 to look at the addresses and locations in those fields so that I don't need to manually re-add them to the map?
View 2 RepliesWhat purpose does this option serve and what is the best way to utilize it
View 2 Replies View RelatedIs there any way to automate/batch the creation of words for the Keyword List?
My photos are stored on a hard disk in more than 2000 named folders. Each folder name is a keyword for the images within. I would like to create a Keyword List of the names of each folder. Since all the names are in digital form, is there any way to automate/batch the creation of words for the Keyword List?
For some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedSharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
I am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
View 1 Replies View RelatedAfter making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 Replies View RelatedWhen I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
View 1 Replies View RelatedI am creating a object that will involve creating tangent lines between two circles. Then, I will need to cut out the curves of the circles so the end shape is like an eggshell or the travel of a rope between two pulleys.
What I am doing, is creating the tangent lines, coloring them green (so I can see the end of the tangent line), making sure the line is arranged on top. Then selecting the circle and the node edit and adding a node where the tangent line ends at extreme magnification. Delete the unneeded nodes on the circles so it forms the "end shape." Then I select both objects, then the node editing tool, select both nodes (end of tangent line and node on end of former circle), and join the curves with the option that joins the curve over the space (this is the part that bugs me).
When I do this, I still notice a slight space between the tangent line and where I added the node to cut the circle. Is there anyway normally with x6, or with a macro, that can place the new node accurately? For instance, wherever the center-lines of the curves/lines meet/intersect?
When I add parameters to Excel, the new parameters do not show up in the linked parts. Even when starting
a new part and linking to the same excel file, the original parameters are all that are shown; not the new ones.
Photoshop Elements 6 (20070910.r.377499)
I do not know why the catalog has changed the file location of "ALL" pictures to the location on my backup drive.
Example: K:My DocumentsMy PicturesPetsPICT1460-1.JPG
The actual location of the original photo is: D:My DocumentsMy PicturesPetsPICT1460-1.JPG
The location of "My Pictures" is on my primary Hard Drive D:My DocumentsMy Pictures
Why is Photoshop changing all of my 37,000+ photo thumbnails to point to my Backup Drive K:?
I need to correct the catalog file. How do I make the correction and stop it from happening in the future?
Can you print the map showing your photo locations in the map module?
View 1 Replies View RelatedWhen I open Lightroom the develope module does not appear with the other modules in the upper right hand corner. How do I corret this?
View 2 Replies View Related"library" has disappeared from the modules listed on the main interface of Lightroom 4.1, I can only get to it from the menu
View 1 Replies View RelatedI upgraded from LR3 to LR4 yesterday and was excited to dive into the Map module. Unfortunately, the map seems to be blank. I have selected an image with GPS information. The Map module correctly looks up the location of the photo (Magdalena, New Mexico). This seems like a rendering bug.
Just to check, I installed LR4 onto another OS X 10.6.8 machine that had not previously had Lightroom and imported the same picture. The Map module worked correctly. So, I tried re-installing LR4 on the original machine. Unfortunately, it still does not work. I tried creating a new catalog and backing up and then deleting all preferences. The map is still blank...
I am open to all sorts of alternatives, including but not limited to: Running dtrace to look at library callsattaching XCode to debug (though I would assume all the objects have been stripped), or Starting up a WebDialogs/WebEx/VNC/TeamViewer/etc server for a dev to pry around on it or debug with XCode. Of course a debuggable build would work with this.
I created a new user on the system that is failing, started LR4, created a new catalog, imported the test photo, changed to Map module--still blank. Something on this particular system is causing the rendering failure. My next thought was that perhaps it was an issue with the non-accelerated graphics. So I disabled the graphics switching. Still a blank map..
I have just installed LR4 upgrade from disk and on opening the program there is no video module in the top bar as the beta version. This is one of the main reasons i upgraded is for the video module.
View 2 Replies View RelatedTuesday night, I was working on a senior photo session. Everything was working perfectly fine. I decided to export the 2013 sessions to a new catalog. Everything still looking great. No issues.
Some potentially important info: I was using two monitors: a pro-level Viewsonic LED backlit 24" calibrated monitor and my laptop monitor. I was working with the Nvidia driver to calibrate the laptop monitor to be "close" to the pro monitor. I was able to get there using the Nvidia controls (versus the defaults). Then the Nvidia auto-updater prompted me to update my video driver that same night. I let it do its thing. Everything appeared to be fine with it and I was still able to work with LR5 no problems.
I had to take a break for a few hours. So, I closed LR5 and came back later to work on more images. When I pulled up the new 2013 catalog, all the image previews (thumbnail and large) were gone. The physical images were still on the drive, but I couldn't see them to edit nor preview them no matter what module I chose. I selected various images I'd just worked on and went to the Develop module - no dice. The preview was not working nor any thumbnail previews.
So I did some troubleshooting. I deleted the LR5 prefs file and let it recreate the file. Still nothing. Same behavior. I went to uninstall LR5 thinking I'd just reset the whole shebang, and noticed that I had LR5 and LR5CC installed (apparently CC didn't uninstall the single license version). So I uninstalled both LR5 installations. I rebooted and reinstalled from CC.
...still nothing... same behavior.
I uninstalled it again (since it's unusable) and installed Bridge CC. Voila! The images are all there and I can work with them in ACR, etc. No issues at all.
This leads me to believe that something got messed up with LR5's configuration with previews. I believe I did have Smart Previews enabled.
So now that you have all that info and backdrop: What should I do to get LR5 back to normal so I can keep working on these paying gigs? If i can understand what caused the break, I'll avoid doing that from now on.
How many panels there are in the web module of Lightroom 4.3 - 6 or 7 - I have 6 only panels, but it seems that I'm missing a seventh - The "appearance" panel or "aspect" in french?
View 4 Replies View RelatedI just got a GPS device for my D800. After I import my files and click on the Map module, I get error when trying to switch between modules. I have to quit LR4 completely. What do I need to do to correct this. I am running LR4 on a MacBook Pro running the latest version of Lion (not ML).
View 1 Replies View RelatedI have a domain name with GoDaddy since I had a website (Zenfolio which I took down). How do I share? How do I find the FTP address for me?
View 1 Replies View Relatedwall trying to export GPS coordinates. Here's the situation:
Lightroom 4.1 Camera (Canon) RAW imported from camera directly to DNG (no location info present) Location added via Map module, and additional metadata (Title, Caption, Keywords, Copyright, etc...) added Save Location not set to Private Export Metadata settings "Remove location info" is NOT checked (i.e., do not remove it)
I export to JPG and the location is not present. Flickr cannot see it, and I load it into Photoshop and examine the metadata and location is not there. I have also used some other online tools to verify it is missing, as well as Geosetter. If I set it in Geosetter, the data is then there. However, Lightroom 4.1 is just not saving it, and I have scoured all the settings looking for any other options.
This is crucial to my workflow and I'd prefer to do as much as possible inside LR and not have to use external tools.
I have a large number of images from a trip ( 10,000+) . So far I have colored coded 2 locations with blue & green. Now obviously I can filter by either color & view those images. Is there a way that I can see all uncoded images. That is filter out the blue & green so I can browse the uncoded images only? For example I would like to add a filter (red) for another location then not show the blue green or red.
Just for your info I do this as a gross filtering prior to ratings or collections. I am thinking that this would allow me to whittle down the images & make it easier to go thru. Using LR 3.5
I have my photos stored on my network drive and my office computer. Initially I started editing my photos off the network drive, mainly because I hadn't realized the location I had chosen. Now I'm having trouble with my network drive going offline intermittantly, making editing a chore because I keep getting "unable to locate file" messages. My question is, can I start using the same photos, which are stored on my office computer, and not lose the edits I have already made?
View 3 Replies View RelatedI want to print a photo in 5x7in.I have a Epson Stylus Photo PX710W printer. I select it from Page Setup button.Then i select the paper size as 5x7in (13x18cm)
But i couldnt set the margins in same size.Left, right and top can be set as 2,8mm. minimum but bottom can set to 3,2mm.Zoom to fill and rotate to fitt both are selected.
Cell size is: 121,0mm. maximum size.
Cell widht is: 172,1mm. maximum size.
I uninstalled my Printer's drivers and software and reinstalled it, but nothing has changed.Then i reinstalled Lightroom but no changes.I use the latest Lightroom 5.3
In the Map module I now see only a blank window instead of the map, even for the tagged photos.
PC, Windows 8.1
For some inexplicable reason, on my LR 4, the word Library is not listed at the top of the home page where the other 6 module names are...Devleop, Map, etc.
View 5 Replies View RelatedVeteran LR user here. Since updating, LR 5 consistently causes snags (for us) when creating web galleries. Here's the workflow: after editing raw files and applying settings, we have a nice folder of images cropped and ready to preview with client.
Now, when we go to the Web Module, the previews are grayed-back in the Filmstrip, and images won't appear in any of the web gallery templates (either custom ones we designed or the preset versions.) We've tried everything from flagging and staring images to get them to appear. Also save metadata to all the images in the folder.
The only thing that seems to work is to close LR5--with backup and catalog optimization--then, we re-open LR5. That seems to "free up" the Web Module. Upon reopening LR5, our folder of images suddenly appears when we go to the Web Module.
This is an unacceptable work around b/c closing and optimizing takes alot of time. Making web proofing galleries used to be a snap in previous versions of LR, now we're stumped in LR5 trying to figure out what we're doing wrong.
I am trying out the 30 day LR 5 trial to see if I would like to upgrade. For some reason my Develop Module contains the same tools as my older version, though I know I shouldn't even see a "brightness" tool.How do I fix this and get the new tools so I can continue my 30 day trial?
View 1 Replies View RelatedI am trying to add new Epson ICC profiles to my lightroom4 print module. I downloaded them from Epson but I do not see them in my ICC list that exhists in the print module uner Other for color managment
View 2 Replies View RelatedI can't access the "Hue" tab in develop module. I can only access Hue by selecting "All."
View 2 Replies View RelatedHow can one change the font of the site title and the collection title within LR4 Web Module? On a Vista PC.
View 1 Replies View Related