Illustrator :: Exporting File As DXF?
Jan 13, 2014what is the process of exporting illustrator as dxf file in order to open in Autocad?
View 1 Replies
ADVERTISEMENT
Illustrator :: Adobe CC Layers Setting For Exporting A File To Photoshop PSD File
Feb 21, 2014Adobe CC layers setting for exporting a Ai file to Photoshop PSD file
View 4 Replies View RelatedIllustrator :: Exporting AI File To SWF
Mar 17, 2014When I export my .Ai file to .swf, the .swf has a huge red square overlaying the image, as well as some rnadom lines and chunks of other pieces of the art scattered around. Basically it's not saving as the image should be. It is a larger file size.. does swf only work up to a certain size?
View 4 Replies View RelatedIllustrator :: Exporting Images From The Same AI File With Different Data
Jan 29, 2014I've an illustrator document that has a code badge design. The bade design includes a 4 digit code that will alter 61 times but only in terms of the digits. I've set up my artwork into 2 layers with type on the top and the graphic underneath. Is there a way of using a script or code to export the graphic with each of the 61 codes or do I need to modify the Ai file 61 times and export 61 seperate raster images?
View 1 Replies View RelatedIllustrator :: Exporting AI File To Simulate Overprint
Mar 30, 2011I have a logo that I ultimatly need rendered properly in a PDF to send for proofing. It has a overprint effect in it but I can't figure out a way to export it as a tif or jpg with a simulated overprint.
Â
What I have tried:
Export as tif and export as jpg (from Illustrator CS5). Neither export has a simulate overprint option, and both export with a big green blob on top of everything (the green blob is the shape that is overprinting)
Â
Save as PDF, press ready, defaults to view of green blob (not simulated overprinting)
Â
Save as PDF, change to PDF 1.3, in advanced flattening I set overprint to preserve, and high resolution. Same result as above.
Â
In a PDF I can turn on the overprint preview, but I can't make that a default (as far as I know). Additionally, I am sending this to a client, I don't want to have to tell him "Oh, and by the way, here are the 10 steps to simulating overprinting in PDFs!"
Â
Also I have tried to import from PDF to Photoshop and there is no option for simulated overprint there as well.
Â
Also, I don't care if it is just a jpg or tif placed into a PDF, I don't need to preserve vector for this portion of it. If I can, then great, if there is a solution but I can't find, It is only for presentation at this stage.
Illustrator :: File Could Not Be Written Due To Error When Exporting JPG?
Mar 19, 2010I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
Â
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
Â
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
Â
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
Â
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
Â
i don't understand why it's started doing this because before it had no problem at all exporting before.
 Â
I'm trying not to have to reproduce days of work to remake the file.
Illustrator :: CS6 - Exporting AI Object Information Into CSV / TXT File?
Oct 3, 2012I have an AI (bundled in CS6) document that has a large number of objects in it - approx 200. Single artboard, single layer.
These objects (right word?) are a combination of placed .png files, polygon/primitives (mostly circles) and text labels. I would like to quickly create and export a .txt or a .csv file that has the following coordinate and size information about each object in the AI document:
Â
Pos (x,y)
Size (w,l)
Â
Is there a menu feature? If not, is there a suggestion for a script? Would like to save a day's work going object by object and manually transcribing this information into a text file.Â
Illustrator :: Exporting Artboards In PNG File With Defined Size?
Mar 6, 2014I have troubles exporting artboards in png file :
I am making artboard of 100px by 100px in order to make a button when I export it (in 72 DPI) the result is 101px by 101px. So how can I export in the size i define the artboard ?
For information I am usind illustrator CC on an iMac.
Illustrator :: Exporting As JPEG With Use Artboards Adds To File Name
Jul 20, 2010When I export from Illustrator CS5 with "Use Artboards" checked it adds a "-01" to the end of my file name before the extention. I'm assuming that its because its artboard #1 or something. It happens with the all or the range button checked. It doesnt show the -01 when you are saving the file name. This is pretty annoying because I have to go back and re name the files when this happens.
View 16 Replies View RelatedIllustrator :: Eliminating Space Above Character In AI File For Exporting To PNG
Nov 2, 2013The image above is for a website which has a colored background. The image will be exported as a PNG file so that the background is transparent. I am unable to eliminate the space above 40th. It seems the bounding box around the character can not go past the artboard area. Is there a way to crop in Illustrator or do something to the character so that it is flush at the top on the artboard area?
View 4 Replies View RelatedIllustrator SDK :: How To Accelerate Exporting Of Multiple Layers To PNG-File
Dec 1, 2011 ai::int32 aint;
sAILayer->CountLayers(&aint);
 for (int i = 0; i < (int) aint; i++){
sAILayer->GetNthLayer((ai::int32) i,&layer);
artSetSuite->LayerArtSet(layer, artSet);
}Â
AIArtHandle hand;
sAIArt->GetFirstArtOfLayer(layer, &hand);
e2 = sAIRasterize->Rasterize(artSet, &rs, &bounds, kPlaceAboveAll, hand, &art, MyRasterizeProgressProc);
 sAILayer->GetFirstLayer(&layer);
e2 = sAIArt->GetLayerOfArt(art, &layer);
e2 = sAIArt->GetFirstArtOfLayer(layer, &art);
 error = sAIImageOptSuite->MakePNG24(art, dstfilter, pngParams2, MyRasterizeProgressProc);
Â
the code above shows how I managed to export a artboard with all layers to PNG-File. My question is, if there is a faster way to combine all layer before exporting, maybe a way without the "temporary layer" (Rasterize(...)-method)?
When I export with the standard-export-button in Adobe Illustrator, it runs fast and with all layers.
Photoshop :: Exporting Paths To Illustrator Option Shows Up Under File - Export
Feb 24, 2012I'v seen for exporting a path to illustrator, they mention the File>Export>Export Paths to Illustrator option. When I look under "Export", the only options I get are:
Â
Data sets as files...
Render Video...
Zoomify
Â
I can still drag/cut/paste the path into Illustrator, so I haven't been stopped, but why the export option isn't showing up?
Illustrator :: Stop Automatically Adding Numbers To File Name When Exporting With Artboard?
Aug 15, 2012I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time.
View 4 Replies View RelatedPhotoshop :: Exporting 3D OBJ File - No Material File Created
Jan 18, 2013In Photoshop CS6 extended,when exporting 3D file as an .obj (that has a material assigned to it), it does not create the material file - .mtl - only the .obj file is created.
Is there a setting I am missing?It works on another station, so I assume its a setting.
Revit :: Exporting File To GbXML File?
Aug 11, 2013I am attempting to create a model of a building for export to the IES Virtual Environment software package for analysis, but am having some difficulties when trying to do so. I am being given error messages that state;
Â
'Revit was unable to identify any rooms. If you are sure that rooms have been created in the project, check the Project Phase setting to verify that the Project Phase matches the phase in which rooms have been defined in your project.''Analytical Top Projection Plane is partially or completely below Analytical Bottom Projection Plane. Please reset top and/or bottom planes to valid values.
3ds Max :: Exporting A 180 Mb SKP File?
Sep 11, 2011I recently tried exporting a 180 mb .skp file into 3ds max Design 2012. I can actually access the file, and no errors appear when I use the import command. However, I encountered difficulties in the actual import, as the status bar simply does not move. It doesn't show that it's reading the file, or even started importing, and my system is still running smoothly, even cancelling import doesn't lag. My concern is that it simply won't work with a large file. Is there a size limit to what you can import, or am I doing something wrong? Converting the scene to .3ds in sketchup takes too long.
View 7 Replies View RelatedAutoCAD .NET :: Exporting DWG File To FBX Through API
Sep 27, 2012Is it possible to export a .dwg file to .fbx file through Autocad .Net Api?
appart from just sending the command as a text.
Maya :: Exporting File In STL?
Dec 11, 2012I made a object which I want to print in 3D but am facing problems with exporting it to STL. I have tried several gids but without succes, the programme seems not to export it. Every time I save it its saved with 0 bytes contend.
View 8 Replies View RelatedGIMP :: Exporting PNG File
Apr 16, 2013When I export "most' of my projects, I've extracted the backgrounds out of them...they transfer "extremely" sharp to my assigned folder. But every now and then, no matter how many times you try to "re" export it, the picture quality is less sharp than I desire. And in this case, it is an image copied from the same page, as other items I've extracted from a magazine, and they clean up and export fine..this one doesn't.
These are black and white pictures, which I am coloring with Gimp, and then transferring to a folder on my computer. Is there anything I can do to "sharpen" the image before I send it. As the picture sets on Gimp right now (with background extracted/and colored) it looks "perfect". Once I export it, it gets slightly distorted?
CorelDRAW X4 :: Exporting PNG / JPG File To 330x250 Px
Oct 22, 2012I have the problem to export the file either png or jpg to the exact 330x250 px. The thing is it exports to 330x249!! and I cant upload the design. I know how to export because any other sizes work fine e.g. there is no problem in exporting to 331x251 px, but can't export to 330x250.
View 3 Replies View RelatedCorelDRAW X5 :: Exporting Certain Object From File
Sep 11, 2011Is there a way to export certain objects from a file with multiple objects?
View 3 Replies View RelatedVideoStudio :: Exporting To HD Video File?
Oct 13, 2010So like many new videographers is am shooting with the 5d markII which obviously shoots in HD.
However i cant seem to export my HD file out of VideoStudio.
When i drag the clip onto the timeline and right click on the clip and go to properties it says it is in 1920x1080. However when i go to create a video file ans click same as video settings it exports it to 720x480 at 29.97 frames per second. And the video was shot at 24fps.
So..
a) i don't understand why it is exporting it to totally different specs that what the project really is?
b) how to i export to an mpeg file that is 1920x1080 from VideoStudio.
CorelDRAW X6 :: Exporting Vector File To AI Or DXF?
Dec 7, 2013I purchased CorelDraw X6 because it is a vector based program. I use vector drawings with my CAM software. I checked before purchasing that CorelDraw exported to AI and DXF. I have not been able to export the file to AI or DXF and have the file be in a vector form. When I try loading the AI or DXF file, the file is a bitmap.
What do I have to do to get Corel Draw to export the lines in a vector format that I can use?
AutoCad :: Type DWG File Not Exporting To DXF?
Aug 3, 2012Im running MEP 2012. When I try to export a .dwg file to a .dxf file, I can see activity in the folder where I'm try to send the .dxf, but then all activity stops and no .dxf was created.
View 2 Replies View RelatedAutoCad :: Exporting DWG To Shape File
Jun 14, 2013If there is a way to export a CAD file (dwg) to a shape file that can be imported into ArcMAP.
We use AutoCAD 2012, and do have Civil 3D, however have not used it (all of our dwgs are with CAD, not 3D).
Lightroom :: Exporting Two Of Same File When Only One Is Selected?
Jan 20, 2014I just recently started having an issue with lightroom 5.3, I import a raw file into lightroom then edit it in photoshop (through lightroom) then i save the file through photoshop and it appears next to the original file in lightroom. When I export the edited image it also exports the original unedited file as well? how to change this? Its very annoying having the original copy of the file exported as well.
View 3 Replies View RelatedPhotoshop :: Exporting From Illustrator To PS
Sep 13, 2004I am trying to export an Illustrator file into Photoshop. So I am exporting it as ".EPS" and then when I try to either "open" or "import" within Photoshop it gives me an error message (see below). Please help, I have no idea what the problem might me, I've been killing myself all day with this.
View 1 Replies View RelatedPhotoshop :: Exporting From Illustrator
Apr 26, 2005I'm trying export a vector image from Illustrator CS 11.0.0 to Photoshop CS 8.0. I go through the process outlined in the manual and succesfully export the file. Everything works fine & I retain my layers (if I use CMYK), but my vectors are gone. The manual says I may need a plug-in but I'm not sure if I'm doing something wrong. My only options as far as color goes is CMYK, RGB, or Greyscale. I select CMYK and make sure "Write Layers" is selected, but there is nothing there to specify vectors.
View 2 Replies View RelatedPhotoshop :: Exporting From Illustrator To...
May 22, 2009Exporting from Illustrator to Photoshop: Not Enough Memory To Save File I have plenty of memory (6 GB) and the files I try to export are not very big (some less than 5 MB). Yet, I keep getting the above message: Not Enough Memory To Save File
View 10 Replies View RelatedIllustrator :: Exporting 1:1 Drawing At 1:100
Feb 13, 2013I have someone doing a drawing and i am asking them to draw it at 1:1 instead of 1:100 even though the final result is going to need to be a 1:100 drawing in eps or pdf.
Â
Is it extremely simple to get a eps or pdf at 1:100 even if the drawing is at 1:1 - while retaining clarity and/or detail etc?
Â
My understanding is that they want this scale for publication but my thinking is that drawing at 1:1 is a much better idea in case i need to use this later.
Illustrator :: Exporting PDF Without Flattening?
Mar 26, 2013How do I export to a PDF from CS5 without flattening the artwork to the template?
View 6 Replies View Related