AutoCAD .NET :: Exporting DWG File To FBX Through API
Sep 27, 2012Is it possible to export a .dwg file to .fbx file through Autocad .Net Api?
appart from just sending the command as a text.
Is it possible to export a .dwg file to .fbx file through Autocad .Net Api?
appart from just sending the command as a text.
Adobe CC layers setting for exporting a Ai file to Photoshop PSD file
View 4 Replies View RelatedIm running MEP 2012. When I try to export a .dwg file to a .dxf file, I can see activity in the folder where I'm try to send the .dxf, but then all activity stops and no .dxf was created.
View 2 Replies View RelatedIf there is a way to export a CAD file (dwg) to a shape file that can be imported into ArcMAP.
We use AutoCAD 2012, and do have Civil 3D, however have not used it (all of our dwgs are with CAD, not 3D).
In Photoshop CS6 extended,when exporting 3D file as an .obj (that has a material assigned to it), it does not create the material file - .mtl - only the .obj file is created.
Is there a setting I am missing?It works on another station, so I assume its a setting.
I have an assembly, which a customer wants to use in their 3D setup. Which file type, gives away the least information?
View 1 Replies View Relatedhow to achieve Isolating a single element and Export the element alone as SAT File?
View 1 Replies View RelatedI am trying to get my first 3d print of a model and am having problems getting it into a format that the printing service can use. I've read up and attempted stlout, 3dprint, and export commands to no avail. I get the message that the objects need to be 3dsolids or watertight meshes.
After reading all the hype on 3d printing and being very excited about it, I"ve got to say that I'm a bit overwhelmed with the steps it appears one has to take to get an architectural model to print.
The model is made with aca 2012.
I have tried to export some simple 2D sketches I created in Inventor into a DWG format used in AutoCAD (which I will eventually turn into a DXF file). However, AutoCAD shows a blank dark screen when I open the DWG file. Is there something that I am missing during the export process?
View 2 Replies View RelatedI hightlite the table in the viewport than right click to get the menu . Then export it and bring up the export dialog box. It keeps saving the file as a bitmap and not a csv file. I did get it to work once when I exported it the first time as a csv file. Now the second time trying to export it , it is coming up as a bitmap file. What am I doing wrong.
View 4 Replies View RelatedI would like to know how to export a hatch shape as a shape file so that it can be used in ArcGIS. I am running C3D 2013 with Map 3D and ArcMap10. I have tried the Output as SDF and the map3d export and I haven't been able to get either to work. I don't have a problem exporting lines, points or polygons.
View 9 Replies View RelatedI'm using a student version of AIP 2012 and am having a problem exporting to .STL file types.
When using a "Standard(mm).ipt" and designing the part in mm, upon export it shrinks the dimensions down.
For example, the width of my sketch is 193mm, upon inspection on a different computer with VCarve Pro and CUT3D were 19mm.
I don't want to dimension the parts as to make the problems in export to the right size because I think that defeats the universal aspects of autodesk.
I want to export a layout as a dwg file. Why do I want to do this? I got a drawing, and they put some stuff on the layout, so I want to export the layout so I can then work in the new file in the model area? Do you get what I mean?
Also, If I make a layout, I put my Firm Logo and information in the layout. If I send this to another firm, which isnt using Autocad, they than can only see the model area, so If I can export it into 1 file, in the model area, they cann see the whole thing.
How to export a surface as a gridded XYZ file based on a user specified grid cell size.
View 3 Replies View RelatedHow to export points that i have plotted into a text file using autocad 2013? I've tried to look on the internet and it seems you can download plug ins but i don't know if those are safe to use.
View 3 Replies View RelatedWhile exporting polylines to polygons as an autocad shp file I get an error when trying to open the file in ArcExplorer 9.2 Java edition. The error code in an invalid field length in the dbf file. Is it specific to Autocad map export issues. The attribute table is an Access file (link template).
View 7 Replies View RelatedI'm trying to export my iam file to a 3D DWG file. When I do, I get the following error:
Runtime Error!
Program: C:Program FilesAutodeskInventor 2012BinInventor.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
I am trying to export and save numerous Inventor Assembly Models, to send to various customers to import into their models. I have been saving them as .stp files, but they are very large files after exporting, and I'd like to know if there is a way to decrease the exported file size. I could zip them after I create them, but I was hoping there was an easier way or different format than .stp. I could also suppress numerous internal componants, but I would rather not have to go through that task either. In the end, they would really only require the outer shell, with any externally viewed holes still present.
View 2 Replies View RelatedI'm a new user of inventor (2013). Is there any option for exporting a file to patran. patran accept some files like *.sat ,... But not inventor out put file *.ipt.
View 1 Replies View RelatedI'm using VB.NET and Inventor 2010. I want to export parts list from idw file to xls or csv file. I checked the internet but could not find trace only exporting BOM from IAM...
I can open inventor and open idw file in VB.net. But could not reach to Parts List.. I checked Inventor2010ObjectModel and sawDrawingdocument>DrawingBOM but could not get success.
I am attempting to create a model of a building for export to the IES Virtual Environment software package for analysis, but am having some difficulties when trying to do so. I am being given error messages that state;
'Revit was unable to identify any rooms. If you are sure that rooms have been created in the project, check the Project Phase setting to verify that the Project Phase matches the phase in which rooms have been defined in your project.''Analytical Top Projection Plane is partially or completely below Analytical Bottom Projection Plane. Please reset top and/or bottom planes to valid values.
It strikes me that there should be an easy way to do this, but it eludes me at the moment. I've used "Connect to Data" to attach a .shp file export from another software, specifically a Windmill computer model. The geometry and data comes through, but the table contains no coordinates, which is what my vendor wants. The drawing overlay's georeference info very closely (within our tolerances) and the Coordinate System is set.
How to suck that coordinate info off the drawing without spending a week clicking on each of 8600 points and typing LIST?
We usually create our assemblies and parts by modeling up solid bodies in one part file and using the make components command to create the individual parts and assemblies. I would like to either use properties or parameters in the initial part file to put in project information and have it carry over into the individual parts after using make components. That way the drafter has to put the information into one file and not 100+ when all the part files are made. I would love to do it with text type parameters but unfortunately haven't been able to do this since you can't export them (unless I am missing something). The end goal is to be able to put a parts list on a shop drawing grabbing the assembly but pulling custom information from the parts and trying to minimize the amount of work the user has to do by going in each part and adding the information.
View 2 Replies View RelatedHow do I export my IDW drawing dimensions to an Excel file for use on a First Article Inspection.
Is it even possible?
Code that I can run to export the handles and x y coordinates of closed polylines and show results in a text file.
View 9 Replies View RelatedIm trying to come up with a lisp that will export x and y coords to a txt or cvs file. However, I need the lisp to export in this format
Units Inch
WPT 1 0 0 ( X=0 Y=0)
WPT 2 1 1 (X=1 Y=1)
WPT 3 2 2
I need to be able to set my zero with move origin and the export the points.
I recently tried exporting a 180 mb .skp file into 3ds max Design 2012. I can actually access the file, and no errors appear when I use the import command. However, I encountered difficulties in the actual import, as the status bar simply does not move. It doesn't show that it's reading the file, or even started importing, and my system is still running smoothly, even cancelling import doesn't lag. My concern is that it simply won't work with a large file. Is there a size limit to what you can import, or am I doing something wrong? Converting the scene to .3ds in sketchup takes too long.
View 7 Replies View RelatedI made a object which I want to print in 3D but am facing problems with exporting it to STL. I have tried several gids but without succes, the programme seems not to export it. Every time I save it its saved with 0 bytes contend.
View 8 Replies View RelatedWhen I export "most' of my projects, I've extracted the backgrounds out of them...they transfer "extremely" sharp to my assigned folder. But every now and then, no matter how many times you try to "re" export it, the picture quality is less sharp than I desire. And in this case, it is an image copied from the same page, as other items I've extracted from a magazine, and they clean up and export fine..this one doesn't.
These are black and white pictures, which I am coloring with Gimp, and then transferring to a folder on my computer. Is there anything I can do to "sharpen" the image before I send it. As the picture sets on Gimp right now (with background extracted/and colored) it looks "perfect". Once I export it, it gets slightly distorted?
what is the process of exporting illustrator as dxf file in order to open in Autocad?
View 1 Replies View RelatedWhen I export my .Ai file to .swf, the .swf has a huge red square overlaying the image, as well as some rnadom lines and chunks of other pieces of the art scattered around. Basically it's not saving as the image should be. It is a larger file size.. does swf only work up to a certain size?
View 4 Replies View Related