Revit :: Exporting File To GbXML File?
Aug 11, 2013
I am attempting to create a model of a building for export to the IES Virtual Environment software package for analysis, but am having some difficulties when trying to do so. I am being given error messages that state;
'Revit was unable to identify any rooms. If you are sure that rooms have been created in the project, check the Project Phase setting to verify that the Project Phase matches the phase in which rooms have been defined in your project.''Analytical Top Projection Plane is partially or completely below Analytical Bottom Projection Plane. Please reset top and/or bottom planes to valid values.
View 1 Replies
ADVERTISEMENT
May 17, 2013
I am having some issues in exporting a Revit 2013 file to gbXML file. I have already followed the instruction steps about how to do the gbXML export in Revit 2013 given by the Offical Revit website.
View 9 Replies
View Related
Nov 14, 2011
The Revit 2011 Navisworks Exporter plugin works fine for exporting files for Navisworks Manage (.nwc). The problem is that those files can't be opened in Navisworks freedom until they are converted to a .nwd file. Can the .nwd be generated directly from the plugin? Both NWD and NWC are shown in the Navisworks Options Editor for the plugin, but only a .nwc is generated.
View 5 Replies
View Related
Jul 22, 2013
I am exporting multiple views as DWGs to create backgrounds.
When I set Naming: to Automatic - Short, it produces files named like:
FloorPlan-2D_L1_Interiors.dwg,
FloorPlan-2D_L1_Structural.dwg,
FloorPlan-2D_L2_Interiors.dwg, etc.
The 2D_L2_Interiors is the name of the view, and it is a FloorPlan so it adds that as a prefix. I am looking for a way to force Revit to ignore the prefix.
Is there a way to export these so they are automatically generated like:
2D_L1_Interiors.dwg,
2D_L1_Structural.dwg,
2D_L2_Interiors.dwg, etc.
Does the Naming: Manual (Specify file name) option have the ability to use fields for parts of the name, perhaps taken from Project Parameters or something? So in the filename box I'd be able to say {View Style}-{View Group}-{View Name}.dwg and end up 3D-Interiors-SomeViewName.dwg?
Or should I download Ant Renamer and call it a day?
View 1 Replies
View Related
Dec 9, 2013
I have created a model within revit architecture 2013 which I want to export as a gbxmL and open in the open studio 1.1.0 interface within sketchup. When I export the gbxmL model into sketchup it does not have a floor, and an error saying surface has two adjacent spaces which are the same space (warning repeated for each room), room will not be translated, and also surface has no adjacent spaces, will not be translated appears.
All spaces are bound to the floor and roof, and zones are correctly assigned, and the model has a location. There are no errors when the export to gbxml is to take place for analytical surfaces or for the rooms. What might be wrong in the way I have assigned rooms/spaces?
View 2 Replies
View Related
Feb 21, 2014
Adobe CC layers setting for exporting a Ai file to Photoshop PSD file
View 4 Replies
View Related
Jan 18, 2013
In Photoshop CS6 extended,when exporting 3D file as an .obj (that has a material assigned to it), it does not create the material file - .mtl - only the .obj file is created.
Is there a setting I am missing?It works on another station, so I assume its a setting.
View 5 Replies
View Related
Mar 10, 2013
I see that keyboard shortcuts in revit 2013 can be eported as xml and imported back from an xml? Is it possible to export the shorcut list as a simple txt file or excel file, for printing purpose. Some of the bim modellers in my office would like to print the shorcut and stick it on their desk.
View 2 Replies
View Related
Jan 16, 2014
I added a FILE PATH label on my titleblock but when I load it to my project file it does not show. Why it does not show, I added a new lable for CLIENT NAME it showed fine. Just to test it out I changed the lable of the second one to FILE PATH and the first one that I did to CLIENT NAME. When I loaded it to my project, the second label dissappeared and the first lable now shows.
View 1 Replies
View Related
Sep 11, 2011
I recently tried exporting a 180 mb .skp file into 3ds max Design 2012. I can actually access the file, and no errors appear when I use the import command. However, I encountered difficulties in the actual import, as the status bar simply does not move. It doesn't show that it's reading the file, or even started importing, and my system is still running smoothly, even cancelling import doesn't lag. My concern is that it simply won't work with a large file. Is there a size limit to what you can import, or am I doing something wrong? Converting the scene to .3ds in sketchup takes too long.
View 7 Replies
View Related
Sep 27, 2012
Is it possible to export a .dwg file to .fbx file through Autocad .Net Api?
appart from just sending the command as a text.
View 1 Replies
View Related
Dec 11, 2012
I made a object which I want to print in 3D but am facing problems with exporting it to STL. I have tried several gids but without succes, the programme seems not to export it. Every time I save it its saved with 0 bytes contend.
View 8 Replies
View Related
Apr 16, 2013
When I export "most' of my projects, I've extracted the backgrounds out of them...they transfer "extremely" sharp to my assigned folder. But every now and then, no matter how many times you try to "re" export it, the picture quality is less sharp than I desire. And in this case, it is an image copied from the same page, as other items I've extracted from a magazine, and they clean up and export fine..this one doesn't.
These are black and white pictures, which I am coloring with Gimp, and then transferring to a folder on my computer. Is there anything I can do to "sharpen" the image before I send it. As the picture sets on Gimp right now (with background extracted/and colored) it looks "perfect". Once I export it, it gets slightly distorted?
View 3 Replies
View Related
Jan 13, 2014
what is the process of exporting illustrator as dxf file in order to open in Autocad?
View 1 Replies
View Related
Mar 17, 2014
When I export my .Ai file to .swf, the .swf has a huge red square overlaying the image, as well as some rnadom lines and chunks of other pieces of the art scattered around. Basically it's not saving as the image should be. It is a larger file size.. does swf only work up to a certain size?
View 4 Replies
View Related
Oct 22, 2012
I have the problem to export the file either png or jpg to the exact 330x250 px. The thing is it exports to 330x249!! and I cant upload the design. I know how to export because any other sizes work fine e.g. there is no problem in exporting to 331x251 px, but can't export to 330x250.
View 3 Replies
View Related
Sep 11, 2011
Is there a way to export certain objects from a file with multiple objects?
View 3 Replies
View Related
Oct 13, 2010
So like many new videographers is am shooting with the 5d markII which obviously shoots in HD.
However i cant seem to export my HD file out of VideoStudio.
When i drag the clip onto the timeline and right click on the clip and go to properties it says it is in 1920x1080. However when i go to create a video file ans click same as video settings it exports it to 720x480 at 29.97 frames per second. And the video was shot at 24fps.
So..
a) i don't understand why it is exporting it to totally different specs that what the project really is?
b) how to i export to an mpeg file that is 1920x1080 from VideoStudio.
View 2 Replies
View Related
Dec 7, 2013
I purchased CorelDraw X6 because it is a vector based program. I use vector drawings with my CAM software. I checked before purchasing that CorelDraw exported to AI and DXF. I have not been able to export the file to AI or DXF and have the file be in a vector form. When I try loading the AI or DXF file, the file is a bitmap.
What do I have to do to get Corel Draw to export the lines in a vector format that I can use?
View 14 Replies
View Related
Aug 3, 2012
Im running MEP 2012. When I try to export a .dwg file to a .dxf file, I can see activity in the folder where I'm try to send the .dxf, but then all activity stops and no .dxf was created.
View 2 Replies
View Related
Jun 14, 2013
If there is a way to export a CAD file (dwg) to a shape file that can be imported into ArcMAP.
We use AutoCAD 2012, and do have Civil 3D, however have not used it (all of our dwgs are with CAD, not 3D).
View 1 Replies
View Related
Jan 20, 2014
I just recently started having an issue with lightroom 5.3, I import a raw file into lightroom then edit it in photoshop (through lightroom) then i save the file through photoshop and it appears next to the original file in lightroom. When I export the edited image it also exports the original unedited file as well? how to change this? Its very annoying having the original copy of the file exported as well.
View 3 Replies
View Related
Nov 7, 2013
I'm trying to set up my new machine to export the XML of a file when I open it by dragging the files onto the Ps icon (Mac). It used to automatically happen on my old work machine.
View 3 Replies
View Related
Sep 23, 2013
I am having trouble with machinists who are unable to use my .dwg files. If I could export to .iges or .stp my pool of machinists grows significantly.
View 4 Replies
View Related
Jan 3, 2013
I'm getting these errors when exporting a simple file as an EPS.
View 5 Replies
View Related
Jan 13, 2011
I am trying to upload a file for a microstock site that requires an eps file under 8MB. As a cdr file, it is under 25KB but when I export the file as an eps it rockets to over 400,000KB.
View 14 Replies
View Related
May 20, 2011
I have a .cdr file which I would like to export in a ai file and open it in Photoshop. The ai file opens empty in Photoshop and logo's I made in CorelDraw are not there.
Which settings in the export window do you need to select?
View 2 Replies
View Related
Jul 5, 2013
When I usually work with corel, I export my files in .png when I finished working so that I can use them in Power Point or whatever. It was never a problem and still works with most of my files, but I have now one file that simply doesn't want to be converted.
I export it like usual (--> export --> .png) but than in the preview it shows me nothing but an empty bar-like part of the file, so basically nothing. The .png file that is created it empty.
View 4 Replies
View Related
Feb 29, 2012
I have an assembly, which a customer wants to use in their 3D setup. Which file type, gives away the least information?
View 1 Replies
View Related
Mar 14, 2008
how to achieve Isolating a single element and Export the element alone as SAT File?
View 1 Replies
View Related
Aug 16, 2012
I am trying to get my first 3d print of a model and am having problems getting it into a format that the printing service can use. I've read up and attempted stlout, 3dprint, and export commands to no avail. I get the message that the objects need to be 3dsolids or watertight meshes.
After reading all the hype on 3d printing and being very excited about it, I"ve got to say that I'm a bit overwhelmed with the steps it appears one has to take to get an architectural model to print.
The model is made with aca 2012.
View 3 Replies
View Related
