I have a .cdr file which I would like to export in a ai file and open it in Photoshop. The ai file opens empty in Photoshop and logo's I made in CorelDraw are not there.
Which settings in the export window do you need to select?
I'm trying to set up my new machine to export the XML of a file when I open it by dragging the files onto the Ps icon (Mac). It used to automatically happen on my old work machine.
View 3 Replies View RelatedThe Revit 2011 Navisworks Exporter plugin works fine for exporting files for Navisworks Manage (.nwc). The problem is that those files can't be opened in Navisworks freedom until they are converted to a .nwd file. Can the .nwd be generated directly from the plugin? Both NWD and NWC are shown in the Navisworks Options Editor for the plugin, but only a .nwc is generated.
View 5 Replies View RelatedI have the problem to export the file either png or jpg to the exact 330x250 px. The thing is it exports to 330x249!! and I cant upload the design. I know how to export because any other sizes work fine e.g. there is no problem in exporting to 331x251 px, but can't export to 330x250.
View 3 Replies View RelatedIs there a way to export certain objects from a file with multiple objects?
View 3 Replies View RelatedI purchased CorelDraw X6 because it is a vector based program. I use vector drawings with my CAM software. I checked before purchasing that CorelDraw exported to AI and DXF. I have not been able to export the file to AI or DXF and have the file be in a vector form. When I try loading the AI or DXF file, the file is a bitmap.
What do I have to do to get Corel Draw to export the lines in a vector format that I can use?
I'm getting these errors when exporting a simple file as an EPS.
View 5 Replies View RelatedI am trying to upload a file for a microstock site that requires an eps file under 8MB. As a cdr file, it is under 25KB but when I export the file as an eps it rockets to over 400,000KB.
View 14 Replies View RelatedWhen I usually work with corel, I export my files in .png when I finished working so that I can use them in Power Point or whatever. It was never a problem and still works with most of my files, but I have now one file that simply doesn't want to be converted.
I export it like usual (--> export --> .png) but than in the preview it shows me nothing but an empty bar-like part of the file, so basically nothing. The .png file that is created it empty.
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedWhen I draw an image on coreldraw 11, and save it as, or export it to a .plt file, it adds lord knows how many nodes, which creates issues for my plotter. How can I fix this issue? when drawing the images I use as little nodes as possible, but as soon as I export it or import it into artcut it has hundreds more nodes than I put in.
View 7 Replies View RelatedIs it possible?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Any file I save to pdf takes any lines and makes them very small as in hairline size.
If converted to object they work fine.
I've designed my vector font and exported the first letter as .ttf. in a new Font File.
When exporting the second letter, it asks me if I want to replace the file, and then says CorelDraw has stopped working. I've re-installed X4, but to no avail.
My OS is Vista.
KitchenCriativa_ai_sample.png
As part of a "kit", I need to export my files to 8 different file types. I've never really checked the .ai file type before as to how it appears. I did, however, tonight and found awful results. When I import my .ai file back in it looks awful. I'll post samples so you can see.... How to fix this on export? (How to upload both files so the one you see below is the result of the .ai export)
When exporting a file to jpeg the dialog box that normally appears and lets you select the quality of the jpeg is not popping up but the files saves but I now have no options in saving the file.
View 7 Replies View RelatedI am drawing pictures for the Second life game. I need that the file I export to be exactly 512 X 512 pixel, and TGA format. Of course, the objects in the picture are small, and don't use al the 512X512 space.But even when objects don't use all the space, I need my "small objects within the 512X512 size file.
Although my picture is, in corel draw 512 X 512, when I export to TGA , I have no the good results.I use yhe File/export/menu and define TGA Bitmap for format.
On the following menu,
if I click on "Maintain original size", Objects remains with original size, but the file size is reduced to fit around the objects..
If I click on "Maintain aspect ratio",, I can fix the size file to 512X512, , but the objects are streched to fill the 512X512 file.
The only way I found to avoid resizing is adding a 512X512 transparent object on the background, but I wonder if there is a better way to do it.
Is there a way to either save/export a vector file that can not be edited.
I know there are tracing programs available, but I want to make it as hard as can be so this logo will not get re-edited.
I designed it for a customer (belongs to us) they did not contract/pay us for it. We do all of their clothing. She is sponsoring an event and the event coordinator wants the logo to put it on their advertising. Just don't want it to end up on other clothes.
I have a major problem with PhotoPaint X5 after SP2. I have an image of a movie poster from internet. Let's say about 1000x1500 pixels. I make the width 300 px. (height will be 440 or more) Than I make a new document of 300x430 pixels. Copy and paste the first file into the second. Move it up and/or down with the arrow keys to have a good composition. Than I combine the image with the background (shift/control/arrow down) and save it to rest.jpg. When I want to close the original image in CorelPaint I get the Corel A.R.M. window. I tried a few times without combining the image to the background and than I CAN close the file without crashing PP. I'm glad I found a workaround since I do these actions quit a lot for my movie and music database. But it took a lot a time to figure out where it went wrong. So according to my tests it must have something to do with combining the image to the background. Sometime when nudging the image a couple of times up and down crashses PP too when I then combine the image and background. At that point i don't come a far as exporting.
View 9 Replies View RelatedI'm using Coral Draw Graphics suite X5 built 15.2.0.686 SP4 (all available updates installed) This is a bug I have detected.
Start a new CorelDrawFile and import a .jpg,after putting e.q. some arrows on it I choose "export" and exports a .tif - file to a folder.
For further manipulations I also save the .cdr - file to another Folder. Insofar everything works well.But if I reopen the .cdr-file and do my manipulations at my picture and then I try to export the .tif - file to the folder, where the before exported .tif is situated, corel well notice that the old file exists and asks for replacement,BUT instead of exporting the .tif - file the .cdr file will be saved. Got this failure reproducible by doing it the same way.
not till I exported a other file type .jpg or any other and switches back to .tif, exporting the .tif file works and the old .tif - file will be replaced by the new one.
I came across an interesting problem. I was using PaintShop Pro to import a RAW image from my camera, then export as a TIF for use in CDGS X6. When I tried to import the file into CorelDRAW or PhotoPaint, I got an error message:
(X) Invalid compress data
I could see a thumbnail image in WIndows, and I could open the file in IrfanView. Re-saving the TIF from IrfanView allowed me to open it in CDGS.
I thought the problem was with PSP, and reported the issue to the product team, but then I tried exporting the same TIF from PhotoPaint (from the same RAW image file), and when I tried to re-open the TIF, I got the same error. So PhotoPaint could not read the TIF exported from... PhotoPaint!
Smaller files don't seem to be an issue, but my camera files are in the neighborhood of 5000x3000 pixels, and the TIF files weigh in at around 50MB.
I am working with a device that can import plt files & it converts that to a tool path in G-Code. works like a champ. but some data, most text (single line font), is converted two times. This makes the tool do the work twice and its pretty inconvenient to manually delete the doubled up G-Code Lines.
I am pretty sure the duplication is done at the Corel export level and not in the translator of the machine. I have been working with the export settings with no success.
When I try to export an image I get the error "An error occurred when writing the property "Revision number" to the file". The file still exports but I would like to get rid of this error.
View 5 Replies View RelatedI was working on my wedding album and had half of it done. The file size is 2.08 GB -- huge I know, and every time I saved the file or the autosave feature came on it took several minutes. I closed the file and tried to re-open it but all I got was a blank standard sized page. The same thing happened with the back-up.
I desperately need to submit the album pages in the next 12 hours or I lose the money I prepaid with the printer. I tried renaming the file as a .zip and then went into one of the folders and opened the riffData.cdr file, but no luck there. I also tried opening a new CDR file and importing the old one, but that didn't work.
When I try to open a 17 MB CDR file, A.R.M. comes up and Corel crashes. I can open other CDR files fine.
WHen the ARM wizard finishes, I get this message:
---------------------------CorelDRAW X3: CorelDRW.exe - Application Error---------------------------The instruction at "0x0065007d" referenced memory at "0x0027f8aa". The memory could not be "written".
Click on OK to terminate the program---------------------------OK ---------------------------
is a very important file (I can't open the Backup file either).
I made a file in coreldraw x6 and unintentionally opened in corel X5. Obviously it didnt open. But apart from that, the file neither opens in corel x6 now!
It seems it cant be opened or something like that. But anyway it still sizes 2,94MB, so I am hopeful to recover it.
[URL]
When I open a CGM file with X5, I see my graphique and my text correctly. But after a save/close/re-open, I have problem with some letter like X, H, I, L or T. Extremities of those letters are joining and letters look like "greek" letters (After check, it's not a greek format). How to fix it without re-write all text?
View 9 Replies View RelatedHow to open .dmp file in corel darw.
View 2 Replies View RelatedI want to open a ".ecw " file in coreldraw x4. What is the process?
View 4 Replies View Relateda similar problem, I am running CorelDraw x6 64 bit on a win 7 64 bit 8 gb ram 8 core processor machine. One machine that I use have x6 64 bit on win7 64 bit and the other one x5 32 bit on a win7 32 bit.I saved the work in x5 x4 and x3 versions on this machine; but the files I 'saved as' never open in any other machine except on x6 64 bit/32 bit machines. I tried opening them in x5 32 bit on win 7 32 bit but the files are not opening. the x6 64 bit files saved in above versions perfectly open in x6 32 bit; but not a single file that I saved in on x6 64 bit open in x5 32 bit.
View 7 Replies View RelatedI can't open my cdr file. It was created in CorelDraw x5. I think it's because file is too much - 16 Mb.
It would be good if someone can open that file and save a part of objects in lower CorelDraw version.
I've tried many ways to open it, but I can't...
I can upload it to somewhere on the net and send link to download.