Lightroom :: Exporting Two Of Same File When Only One Is Selected?
Jan 20, 2014
I just recently started having an issue with lightroom 5.3, I import a raw file into lightroom then edit it in photoshop (through lightroom) then i save the file through photoshop and it appears next to the original file in lightroom. When I export the edited image it also exports the original unedited file as well? how to change this? Its very annoying having the original copy of the file exported as well.
View 3 Replies
ADVERTISEMENT
Jun 18, 2009
I have this file with multiple layers of text.
I want to print the file with these layers selected individually, so that if I have two text layers "Cow" and "Dog", I get two similar images with different text.
How would i automate this? It would take a lot of work to select each layer and save the files individually.
View 2 Replies
View Related
Jul 30, 2010
Recently upgraded to LR3. When moving a number of files from one folder to another, about every third time, it moves all but one file and I get this message about the unmoved file. If I then try to move just that one remaining file, it moves it fine.
View 3 Replies
View Related
Nov 8, 2013
I get an error code "file could not be moved to selected location" when trying to move an image or a folder from one hard drive to another within Lightroom.
I am migrating from a Windows-based PC to an iMac. I successfully used Lightroom to move all my images and catalogs from the PC hard file to a USB attached hard file. I was able to go to the iMac and move the Lightroom Catalog from USB attached drive to the Apple Macintosh drive. I was able to bring up Lightroom with moved Lightroom Catalog and work with all of my images. Then using Lightroom I was unable to move the images to the Macintosh hard drive without getting the error code above.
View 4 Replies
View Related
Nov 8, 2011
Is there a simple way to limit the file size of the photos selected in LR3 for a photomerge in PS5?
I have found that without limiting the size, the panoramas generated are very large - 1GB or greater.
I've found an work around by opening the photos in Bridge and then in Camera Raw where I can reduce the file size before using PS5 for photomerge. After I've done this, it's a bit of a hassle to get the panorama back into LR3. The benefit of this approach is that it speeds up the processing significantly and downstream with any subsequent processing since the files are just large and not ginormus.
If this isn't possible, this seems like a good idea for LR4.
View 5 Replies
View Related
Aug 12, 2012
I'm using LR4.1 on OSX 10.6.8. I convert my NEFs to DNGs at import, do my edits in LR. Most of the time when I want to create output it's for screen use. I use "Export" and produce JPGs.
But when I'm preparing files for printing at the lab, I use the Print module, and Print to File, because I like to create a JPG where the image size is smaller than the paper size, for framing purposes. For example, I use the Print module to output a JPG where the "cell size" is 11x14 but the "custom file dimensions" are 12x18, then I have the lab use 12x18 paper, leaving me a white border on my print that makes it easier to mat and frame.
Two questions, really.
1. Does LR do anything differently as it creates a JPG, depending on whether you use Export or "Print to File"? I'm assuming not, but just wondering.
2. Is there a way to do what I want to do -- create a JPG where the picture is one size but the paper size is larger -- through the Export dialogue (like ideally, through an export preset) or do I indeed have to go through the Print module to do this?
No emergency here, my method is working for me. (Though using an export preset to do what I'm doing, rather than having to go through the Print module, would be a little quicker, I suppose.)
View 1 Replies
View Related
Dec 5, 2012
I recently upgraded to lightroom 4 and I am having issues exporting my photos into a jpeg file. Lightroom is decreasing the size of my photo significantly, make them only about an 8 x 10 size and some as little as 3x5. I have tried everything I can think of, and it works as a tiff file, but for some reason it shrinks the picture on jpeg.
View 2 Replies
View Related
Jan 23, 2013
I am new to Lightroom 4 and are having some problems exporting certain file dimensions. I have taken some pictures for a friend who wants to use them on her website. When importing the photos I converted them to dng. I have exported different file dimensions such as 320x240 and 640x480 without any problems. Now she asks for 950 x 340. I can enter the dimensions and export it, but when I check the dimensions on the exported photos I get e.g. 513x340.
View 4 Replies
View Related
Jul 17, 2012
When exporting DNG files as JPG the file icon doesn't show a complete picture. Perhaps 2 out of 25 files will be affected.
View 8 Replies
View Related
Jan 1, 2012
I have Lightroom 3 and using Windows 7.
I have a watermark created that I use when I export images using "File > Export with Preset". The watermark is rendered when I export to a TIFF or PSD file. It is not rendered when I export to a JPG file. How I can have a Watermark added to an exported JPG file?
View 3 Replies
View Related
May 9, 2012
At one time I was able to export a file's original file name in the "Raw Data" area of the metadata. I seem to have lost that ability in LR 4. I find this useful when a client renames a file and then wants me to find the original. I would open the file in Photoshop (or even a word processor) and the original name would be in the Raw Data area in File Info.
When LR 4 imports the file the first time, it apparently still creates the xmp file with the file name at the end of <rdf:Description rdf:about="" field and it looks like: crs:RawFileName="_DSC6501.NEF">
At one time Lightroom exported that info. But now I seem to have lost that file name info, even with "Export All Metadata" selected.
This is how it would look in Photoshop's File Info:
<rdf:Description rdf:about=""
xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
<crs:RawFileName>DSC_8466.NEF</crs:RawFileName>
[Code]....
View 7 Replies
View Related
Jul 8, 2013
I am having trouble with Lightroom 5 exporting images at incorrect file sizes. For example, if I use my export preset for images with long edge 2500 pixels and maximum size 1000k it is exporting images at 1500-2500k.
View 7 Replies
View Related
Jul 17, 2013
When I attempt to export a group of approximately 50 photos from LR4, a window opens at the end of the process saying "The file could not be written" along with a list of approximately 10-15 NEF file names. I have never had a problem exporting before, but I recently started storing my LR catalog and files on an external USB 3.0 drive.
Here are the details:LR4 with latest updatesWin 7 with latest updatesLR catalog and photo files stored on external USB 3.0 G: driveTrying to export to a folder on my desktop on C: drive (46GB free out of 134GB, solid state drive)LR files are NEF, exported files are JPGI've tried to export to the same group of photos multiple times with different names and different output file sizes (8MB, 5MB, 2MB). Each time the list of failures is different.Some of the thumbnails which appear in Windows Explorer are corrupted (part of the thumbnail is gray)When I try to export the same group of photos to the external USB 3.0, it works perfectly!
Here is an example of one of the LR log files:
The file could not be written. (17)
G:2013Stratton and Colorado20132013-06-23\_D7K1915.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1918.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1919.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1939.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1948.NEF
[code].....
View 1 Replies
View Related
May 29, 2012
Program: CorelDraw X6 64 bitOS: Windows 7 SP1 64 bit
I have problem when exporting selected only artwork to eps. The artwork itself contains standard fill objects with no strokes and no special effect on each object (drop shadow, powerclip, etc). On EPS Export dialog I change nothing, just clicked OK button.
The problem is there is no sign if the process success or fail.The file created only have zero bytes.The File>Exit menu is dimmed.When I try to close the document, it say:
Some of the documents could not be closed, because tasks are being performed in the background. Check the status bar of each opened document to see what tasks are being performed and their progress.
I can't close the document and exit the program, so I have to use Task Manager. Also if I continue to edit the artwork, i.e. selecting an object inside a group, the program crashed.
The Windows Crash Report:
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDrw.exe Application Version: 16.0.0.707 Application Timestamp: 4f4c60a4 Fault Module Name: ntdll.dll Fault Module Version: 6.1.7601.17725 Fault Module Timestamp: 4ec4aa8e Exception c0000005 Exception Offset: 000000000005386a OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1057 Additional Information 1: 91e0 Additional Information 2: 91e002aff0b00b72d21810f7f6e3ec21 Additional Information 3: df3c Additional Information 4: df3c618bdba74b45b8aca9fde7c3e7c7
View 2 Replies
View Related
Aug 20, 2013
The software that I use my GIMP images for requires that I export a bmp with the settings in the attached screenshot. I have two questions:
Is there a preset somewhere or perhaps an image type that I can select that will always export bitmaps with the Do not write color space information checked and 24bit R8 G8 B8 radio button selected?
Is there a way I can script this to be done as part of a python script?
These are the only image choices I have available.
These are the export options I need for my image to be visible in the software, I have to select these options every single time I do an export.
View 4 Replies
View Related
May 28, 2012
I have a canvas with a number of different images/shapes on it.How can I just export one of the images & not the whole canvas?
View 7 Replies
View Related
Oct 19, 2012
I've recently encounterd a problem while trying to export images out of Lightroom 4. I keep getting an error messge "File canot be written." This is happening whether I'm exporting a Jpeg or a raw file. Cannot figure what has happend but it's doing it with old and new files, so it's not an issue of a corrupted file.
View 1 Replies
View Related
Sep 12, 2013
Exporting collections to external file only allows export as a jpeg and Not the original file types?
View 5 Replies
View Related
Jul 10, 2012
In LR3, when exporting a raw file as a jpeg the only choices given at the top of the dialog box are Hard Drive and CD. Is there a way to export directly to a thumb drive or external HD without exporting to the HD then copying the file (s) over?
View 1 Replies
View Related
Oct 21, 2013
I imported some pictures into LIghtroom 5 with the SAME jpg numbers as a prior import. The first import consisted of pictures from Trip 1 folder on my hard drive, the second import was from Trip 2 folder on hard drive. I see the Trip 1 and Trip 2 folders in LIghtroom 5, but am experiencing problems with emailing and exporting pictures, getting messages such as "Missing file" or "Export does not show up. Were there problems with the import?
View 1 Replies
View Related
Jun 12, 2013
On LR 4 and now 5, the shades of grey used to distinguish the selected vs, not selected images in the filmstrip at the bottom of the workspace are too close together making it difficult to see what has been selected. Is there someway to control the color and/or the shade of grey used for each to make it easier to tell at a glance which image(s) is currently selected?
View 1 Replies
View Related
Apr 18, 2012
I have recently upgraded from AutoCAD 2008 to 2001. Now when opening a file from windows explorer (desktop vs the AutoCAD browser) and AutoCAD is not running. AutoCAD will startup and open a new drawing as well as bring up the dialog box for finding a file to open, which I cancel, THEN open the drawing that I have selected. I have not seen this before and am wondering what variable or option is causing to happen. I am also seeing two icons for the same drawing file in the Windows task bar.
View 2 Replies
View Related
Feb 21, 2014
Adobe CC layers setting for exporting a Ai file to Photoshop PSD file
View 4 Replies
View Related
Jan 18, 2013
In Photoshop CS6 extended,when exporting 3D file as an .obj (that has a material assigned to it), it does not create the material file - .mtl - only the .obj file is created.
Is there a setting I am missing?It works on another station, so I assume its a setting.
View 5 Replies
View Related
Aug 11, 2013
I am attempting to create a model of a building for export to the IES Virtual Environment software package for analysis, but am having some difficulties when trying to do so. I am being given error messages that state;
'Revit was unable to identify any rooms. If you are sure that rooms have been created in the project, check the Project Phase setting to verify that the Project Phase matches the phase in which rooms have been defined in your project.''Analytical Top Projection Plane is partially or completely below Analytical Bottom Projection Plane. Please reset top and/or bottom planes to valid values.
View 1 Replies
View Related
Nov 3, 2013
I'm using Dropbox to synchronize my files with another computer and do backups. Over the last three months I haven't been doing anything with my CorelDraw files but recently tried opening a file and found there was a problem. When attempting to open a file, I get this error:
Either filename is not importable using the selected filter, or this format is not supported.
I thought it was related to Dropbox so I created a brand new file, saved it and was able to open it. Dropbox sync'd the file and Dropbox gave an update message that Dropbox has updated the file to the most recent version. Afterward, I wasn't able to open the file with CorelDraw anymore.
I'm using CorelDraw X5 and saving the file in X5 format. Is there anything I can do to recover my files?
View 7 Replies
View Related
Aug 24, 2011
I'm using PSP Ult ver. 13.21.20 and have been getting this message for awhile now. I'm not able to associate any jpg or bmp files with PSP. When I right click to "Open With" PSP is not an option and trying manually does nothing. Some pics I can drag in and open. Dbl clk only opens the Instant Viewer.
View 6 Replies
View Related
Oct 18, 2013
In X5 Draw I am working on a job and the run time error comes up and shuts X5 down. And then when i restart and try to access that same file (saved throughout job) I get this error that the file is not importable by selected filter, or the format is not supported.
View 2 Replies
View Related
Nov 17, 2004
Is it possible to put as part of an action 'open the file that's selected in the file browser'. At the moment I select files and then run a batch process, or open the file and then run an action, but can I skip that stage?
What I have in mind is being able to look over the file browser to see which action each file needs to have run, but to be able to just click an action button and for it to open that file and run the action, etc.
View 4 Replies
View Related
Jan 6, 2009
In previous versions, when in the file requester, with the File Type field focused, I could type the first letter of the format I wanted (ex. J for Jpeg), and it would select it. That was a nice little feature that sped up the saving process (...didn't have to open up the File Type pulldown, and scroll through the selections until I found the one I wanted).
Is that now gone in CS3 (extended), or is there some setting I can change to get that back?
View 1 Replies
View Related
Jul 3, 2012
What is a most convenient way to export selected paths to SVG file? GIMP provides only 2 options for the export: export only one - "active" - path, or export all paths. It's not very useful in my case. I have an image with several layers and a bunch of paths related to different layers. So I need to export only paths which "belong" to a selected layer, so to speak. Of course, I can edit SVG by hands, but I wonder if some decent tools there exist for this task.
View 1 Replies
View Related
