Photoshop :: 'File Type Being Selected By Keystroke'...
Jan 6, 2009
In previous versions, when in the file requester, with the File Type field focused, I could type the first letter of the format I wanted (ex. J for Jpeg), and it would select it. That was a nice little feature that sped up the saving process (...didn't have to open up the File Type pulldown, and scroll through the selections until I found the one I wanted).
Is that now gone in CS3 (extended), or is there some setting I can change to get that back?
I was wondering if the is a way to go from a Inventor file type to a Solidworks file type. One of our customers is asking for one or the other following file types: .asm or .prt. Â Â
They also mentioned something about "shrink wrapping" the file to all the surfaces.
is there any way to check the entity selected by NonInteractivePickPoint? iwant to get the ownerid if the item selected is a 3d or 2d vertex. How is it written in vb.net?
Is there a way to determine the type of ACAD object that the user selected? I need to retrieve the value from either a dimension or text. The info could be in either format so the lisp routine needs to determine what was selected so the correct vla-get command is used.
Once I determine what the object is I can use an if statement to retrieve the value.
;user selects the object (setq dimobj (vlax-ename->vla-object(car(entsel)))) ;If ACAD object is a dimension do this. (setq dimvalue (vla-get-textoverride dimobj)) ;If ACAD object is text do this. (setq dimvalue (vla-get-textstring dimobj))
I'm not that good at typing and when I make a mistake in Photoshop CS6, suddenly find myself in a strange place from which I often don't know how to return from. I use about twenty keystroke commands, but there are so many others I don't use and which cause me problems. Â Is there someplace on CS6 to turn off those commands I never use?
I'm trying to use CTRL+A;Delete;CTRL+D key combination in order to clear the content of the active layer. When I'm doing it manually via the keyboard, the results are as expected.
But when I feed this and a sequence of keystrokes to one of my Wacom tablet keys: If the pointer is off canvas nothing happens, and if it's over the canvas, the canvas gets surrounded by a blue border, same as if I were holding down the CTRL key alone for selecting the whole layer.
Which key combination should yield the expected result via a table keystroke?
I am testing the LT 2012 version in Windows. I want to use the pan command which used to be a easily visible button, one click. In 2012 I have to go to View>Pan to acess the button, 2 clicks, If I type P I get a popup menu with every command starting with a P, with Pan at the top, click on Pan, 2 clicks again.
So, can I move the Pan button to the Home tab to make it simpler? Can I edit something so when I type P it knows I mean Pan and don't have to make another choice?Â
This is really slowing down my process and work flow, it's like stutter! Used to be a seamless flow of click, click, click. Now it is click, pause, search, click, pause, search, click.
I have recently upgraded from AutoCAD 2008 to 2001. Now when opening a file from windows explorer (desktop vs the AutoCAD browser) and AutoCAD is not running. AutoCAD will startup and open a new drawing as well as bring up the dialog box for finding a file to open, which I cancel, THEN open the drawing that I have selected. I have not seen this before and am wondering what variable or option is causing to happen. I am also seeing two icons for the same drawing file in the Windows task bar.
I've been working on a certificate and i saved it without looking at the file type. For some reason it set the file type to (.5). What is that? Is there any way I can open it again in CS5? Is there a file converter I could use. I just need to basically open the file agian in CS5 so I can continue to edit the certificate. I have tried opening the file with CS5 and CS6 and I get this message: Â "Could not complete your request because it is not the right kind of document."
Out of the blue today, my OSNAP shortcuts disappeared. Â Whenever I'd bring up the menu, I could not hit the E key on the keyboard for Endpoint or any other shortcut keystroke. Â Upon more research, this applied to all menus. Â Turns out this is not an Autodesk issue but a Windows setting. Â Here's how to restore if you encounter this as well.
1. Hit the Windows + U keys to bring up the Ease of Accees Center
2. Click on "Make the keyboard easier to use
3. Check Underline keyboard shortcuts and access keys
in ACAD 2013 if I use object tracking to space an object or dimension (or anything, really), as soon as type on any key the tracking goes away. What can I do to change this? I do not have this problem in 2012.
Command 'R' to render out a clip? Each time I do it Premiere Pro whips me back to the start of the timeline. I've started up a new project.  I'm wondering if Premiere Pro will have a plist file, mmm, maybe I will go look ..   using the FCP7 keystrokes in PP CS6.
I designed artwork for a large banner (84" x 32") so my AI artboard is that large. As you can imagine, with all the text and graphics I used, this file size is 22.8 MB. I need to email this art to the printer, but the file size is too large to email. How do i go about reducing the file size in AI so it still maintains large format print resolution? Will saving to a PDF lose the print quality?
Is it possible to put as part of an action 'open the file that's selected in the file browser'. At the moment I select files and then run a batch process, or open the file and then run an action, but can I skip that stage?
What I have in mind is being able to look over the file browser to see which action each file needs to have run, but to be able to just click an action button and for it to open that file and run the action, etc.
First I will state that everything within the program, to my knowledge, works just fine. Although..
I'm having a really strange issue when I try to type a command. It's an intermittent problem that occurs very often and can be extremely frustrating.
If I try to type a command, i.e.. M followed by enter to move an object, often times the command will repeat "MMMMMMMMMMMMMMMMM" and the command entry will fail. This happens for every button I press too. Letters, numbers, and even the Enter key will be repeatedly entered into the command prompt. Often times I've already pressed enter to execute the command. During this process the whole program seems to freeze, but not for too long. So I often have to enter the command multiple times, regardless of which button is repeating itself.Â
The repeating of a keystroke only lasts between 1-2 seconds but as I said has a very frequent occurrence.
I'm almost positive that this has nothing to do with my keyboard, as I've never experienced this kind of problem elsewhere. This is my machine at work and I've never encountered an issue as frustrating at this. Could it be something that my machine is doing?
No matter what I do, or where I've checked, I can't get text to show up on my either jpg or psd version of an image. The text box isn't too small (checked that), text is black on white background (check), even changed fonts to test that. I'm working on a PC, Windows 7, CC and/or PSCS6 -- tried them both.
I've just now installed Photoshop CS6 and Lightroom 4. File types PSD and TIFF work fine, but I'm completely unable to associate JPG, JPEG or any other variant with the Photoshop program such that I can double-click on the photo file and open Photoshop and the photo. I can associate JPG with either Bridge or Lightroom, or several other programs, but when I browse to Photoshop and select Photoshop.exe nothing happens, not even an error message. Â Operating system is Windows 7 Ultimate Edition, 32-bit. There is 4GB of memory in the machine, which is a Dell Vostro 1720 laptop.
I'm trying to figure out what file type/setting I should start saving my files as for printing. I want to have files that will give the highest quality when printing, but not take up any more space on my hard drive than necessary (I want to archive and be able to share the non psd files). What would you guys recommend? Are you losing anything by saving files as jpg? What about the difference between quality level “10” and “12” for jpg (since the file size doubles)?
How to I simplify the list of file types in the Save-As file type list? I use less than six file types. I have no need for most of these. It would be nice to have my top 5 and then the ability to go off-menu if needed for others.
I want to print the file with these layers selected individually, so that if I have two text layers "Cow" and "Dog", I get two similar images with different text.
How would i automate this? It would take a lot of work to select each layer and save the files individually.
When I save for the web, select my file type ( png,wbmp,jpeg) it displays the file type as a Gif in the lower left even though the file saves in the correct format. This is the version from the cloud download. Every file type displays this way?
I scanned some images using Phtoshop CS2 and saved them in Photoshope as jpgs. But apparently photoshop interpretted the end of the file name that I typed as a file extension - so a file that was called Portrait-06.22.1999 - was saved as a "1999" file as opposed to a jpg file. I can view these images in Windows Photo Viewer or Windows Live Photo gallery but they won't open in Photoshop. How do I change the file type so photoshop will recognize them? I tried just to add a JPG extension to the name of the file but that did not work. Also those photos that had this problem but were listed under "open recent" - I was able to get back in and save again as jpg and now they are fine.
I just reinstalled CS3 on my refurbed Mac G4. When I try to open an Nikon camera raw file (.NEF), I get the error message, "Could not complete your request because Photoshop does not recognize this type of file." Prior to a hard drive crash, I opened .NEF files using CS3 on my G4 frequently with no problems. I have reinstalled the software twice and tried importing the files from the camera using Bridge all with the same result.
I need to print some stuff in japanese. However, since illustrator doesn't seem to support chinese nor japanese, I've been using photoshop. Up to now whenever I print business cards or whatever, I've been sending the file type to the print shop as .ai. However, with photoshop, do I simply send the file over in .psd format?
